RCV2G15E-F8M2I Electric Triplex Pump | 2.0 GPM 1500 PSI

RCV2G15E-F8M2I by Annovi Reverberi — RC Series Electric Triplex Plunger Pump with Mini-Matic M2I Unloader and Chemical Injector | 2.0 GPM | 1,500 PSI | Brass Manifold | 5/8″ Hollow Shaft | NEMA 56C F8 Electric Motor Mount

The RCV2G15E-F8M2I by Annovi Reverberi is a compact RC Series triplex ceramic plunger pump engineered for NEMA 56C electric motor-driven pressure washing systems requiring 2.0 GPM at 1,500 PSI with factory-integrated downstream chemical injection capability. Rated at 2.0 GPM and 1,500 PSI, the RCV2G15E-F8M2I delivers 3,000 cleaning units — combining 2.0 GPM balanced flow with 1,500 PSI controlled impact for residential patios, decks, fences, siding, vehicle washing, surface preparation, and light shop rinse-down — through a precision-machined brass manifold, solid ceramic plungers, stainless steel valves, and an F8 NEMA 56C flange with 5/8″ hollow shaft for direct coupling to compatible electric motors. As part of Annovi Reverberi’s pump and unloader assemblies stocked and supported by WSHPWR, the RCV2G15E-F8M2I arrives factory-configured and factory-tested, ready to deliver from the first startup.

The RCV2G15E-F8M2I carries the factory-installed Mini-Matic M2I integrated unloader assembly — delivering factory-set pressure regulation, bypass protection, and downstream chemical injection from a single compact, factory-configured assembly. Electric motor operation on the NEMA 56C platform delivers quiet, exhaust-free output — making the RCV2G15E-F8M2I well suited for garage systems, enclosed shop wash stations, residential cabinet washers, and indoor-friendly electric cleaning applications where noise and emissions are a consideration. Built by Annovi Reverberi in Modena, Italy — with US-based operations, a domestic parts distribution network, and dedicated technical support — this pump arrives pre-filled with factory break-in oil, factory-tested, and ready for installation. Protected by a 5-year US limited warranty and built to be fully rebuilt rather than replaced, the RCV2G15E-F8M2I is a long-term investment capable of a decade of productive service life.

Factory-Matched and Approved — The RCV2G15E-F8M2I Complete Assembly Advantage

No Mismatches. No Guesswork. No Warranty Risk. Just Install and Run.

Every RCV2G15E-F8M2I ships as a factory-matched, factory-approved, and factory-installed complete pump and unloader assembly:

• Factory-matched M2I for 1,500 PSI — the Mini-Matic M2I integrated unloader and chemical injector are factory-calibrated for this pump’s 2.0 GPM / 1,500 PSI duty point. Pressure regulation and chemical draw characteristics are factory-set as a complete system.
• Factory-approved configuration — the complete assembly is Annovi Reverberi’s validated specification for this model. Operating with the factory-installed components maintains full 5-year warranty coverage.
• Factory-installed and tested — every RCV2G15E-F8M2I exits the manufacturing facility with the M2I assembly mounted, calibrated, and tested for flow, pressure, and leak-free operation before shipment.
• Eliminates mismatch returns — the factory-matched assembly eliminates incorrect unloader or injector specification — the most common source of pump system returns — before the pump leaves the box.
• Installation-ready — confirm NEMA 56C motor compatibility, mount via the F8 flange, connect system hoses, connect the detergent supply line to the injector port, and start. The RCV2G15E-F8M2I arrives engineered, assembled, and ready.

Decoding the RCV2G15E-F8M2I Model Number

What Every Segment of This Annovi Reverberi Pump Designation Tells You

• RCV — Pump series: RC Series triplex plunger pump — Annovi Reverberi’s compact commercial electric motor pump platform
• 2G — Flow rate: 2.0 GPM
• 15 — Maximum pressure: 1,500 PSI — 2.0 × 1,500 = 3,000 cleaning units
• E — Shaft type: Electric shaft — hollow shaft configuration for direct electric motor coupling per Annovi Reverberi model designation convention
• F8 — Flange type: NEMA 56C flange — direct coupling to NEMA 56C electric motors with 5/8″ hollow shaft (Annovi Reverberi part AR1584)
• M2 — Unloader family: Mini-Matic — factory-installed integrated unloader assembly with pressure regulation and bypass protection
• I — Chemical injector: Included — downstream soap injector factory-integrated into the Mini-Matic M2 assembly for chemical application and rinse capability

Key Specifications

RCV2G15E-F8M2I Technical Details at a Glance

• Flow Rate: 2.0 GPM (gallons per minute)
• Maximum Pressure: 1,500 PSI
• Cleaning Units: 3,000 (GPM × PSI)
• Pump Type: RC Series horizontal triplex ceramic plunger pump — smooth, low-pulsation output
• Drive: Electric — NEMA 56C motor platform; quiet, exhaust-free operation for indoor and residential applications
• Flange: F8 — NEMA 56C electric motor flange, 5/8″ hollow shaft (Annovi Reverberi part AR1584)
• Manifold Material: Precision-machined brass — pressure stability and corrosion resistance
• Plungers: Solid ceramic — wear resistance and consistent sealing performance
• Valves: Stainless steel — durability under frequent pressure cycling
• Bearings: Industrial-grade — long-term tolerances under continuous operation
• Serviceability: Oil sight glass and vented dipstick for simplified routine maintenance
• Lubrication: Oil-bath crankcase with factory pre-filled break-in oil
• Unloader System: Mini-Matic M2I — factory-set; integrated downstream chemical injector; factory-matched and factory-installed
• Connections: Banjo bolts and sealing O-rings — standard M2 family hardware supplied for secure, leak-resistant installation
• Chemical Injector: Included — downstream venturi injector factory-integrated into M2I Mini-Matic assembly
• Warranty: 5-year limited warranty — US-based coverage through Annovi Reverberi North America

What’s Included in the Box

A Complete, Factory-Configured RCV2G15E-F8M2I Assembly Ready for Installation

• Factory-matched Mini-Matic M2I integrated unloader with active chemical injector — factory-set and installed for the 2.0 GPM / 1,500 PSI operating point; injector port ready for detergent supply line connection
• Banjo bolts and sealing O-rings — standard M2 family hardware for secure, leak-resistant unloader connections
• Factory break-in oil — crankcase pre-filled to the correct operating level for first startup
• Oil sight glass and vented dipstick — at-a-glance oil level monitoring and simplified oil changes
• Mounting hardware — for F8 NEMA 56C electric motor installation
• Owner’s manual — complete installation, startup, operating, and maintenance procedures including oil change intervals, chemical injector care, and winterization protocol
• Parts schematic — exploded-view diagram with Annovi Reverberi part numbers for every serviceable component

Mini-Matic M2I Unloader — Chemical Application and Rinse at 1,500 PSI

Factory-Set. Integrated Chemical Feed. Bypass Protection. Compact Electric Design.

• Factory-set pressure regulation — the Mini-Matic M2I on the RCV2G15E-F8M2I arrives calibrated for immediate 1,500 PSI operation, providing controlled, gentle cleaning pressure appropriate for painted surfaces, wood, vinyl siding, and delicate outdoor materials
• Integrated downstream injection — draws detergent, cleaner, or pre-soak solution when the operator applies chemical. No separate injector hardware or additional plumbing required on the RCV2G15E-F8M2I.
• Chemical application and rinse at 2.0 GPM / 1,500 PSI — chemical pre-treatment loosens surface contamination; full 1,500 PSI / 2.0 GPM rinse removes loosened material at 3,000 cleaning units. Switch between application and rinse without changing tools.
• Bypass protection at trigger release — the M2I unloader automatically diverts flow when the trigger is released on the RCV2G15E-F8M2I, preventing pressure spikes and protecting the pump during pause intervals
• Compact integrated assembly — the M2I’s manifold-integrated design reduces fitting count and supports clean installation in tight frames, enclosed cabinets, wall-mounted electric systems, and garage wash stations using the RCV2G15E-F8M2I
• Injector maintenance — flush the M2I injector circuit with clean water after every detergent session to preserve long-term venturi function on the RCV2G15E-F8M2I

1,500 PSI — Controlled Pressure for Surface-Sensitive Applications

Gentle on Paint and Wood. Effective on Dirt. Quiet Electric Operation.

• 1,500 PSI for surface-sensitive cleaning — the RCV2G15E-F8M2I’s 1,500 PSI output is well-matched for cleaning applications where higher pressure risks surface damage. Painted wood, vinyl siding, soft composite decking, vehicle finishes, and outdoor furniture all benefit from the controlled impact this pump delivers.
• Surface preparation for painting and sealing — 1,500 PSI provides sufficient force to clean concrete, wood, and metal surfaces before coating or sealing applications without over-etching or raising wood grain aggressively
• Quiet, exhaust-free electric operation — the RCV2G15E-F8M2I’s NEMA 56C electric platform operates without the noise, fumes, or fuel handling of gas engine alternatives — suited for residential garages, enclosed equipment rooms, and small shop environments where clean, quiet operation matters
• Compact footprint for tight installations — the RCV2G15E-F8M2I’s horizontal triplex design and compact direct-mount package fit garage systems, shop wash stations, enclosed cabinets, and wall-mounted electric frames where space is at a premium

Typical Applications

Where the RCV2G15E-F8M2I Delivers Best Results

• Residential cleaning — patios, decks, fences, siding, and outdoor furniture where the RCV2G15E-F8M2I’s 1,500 PSI controlled output and factory-integrated chemical capability handle residential surface contamination without risk of surface damage
• Vehicle washing — cars, motorcycles, ATVs, trailers, and small boats where low-pressure electric operation delivers safe, thorough washing without the noise or exhaust of gas engine alternatives
• Small shop rinse-down and equipment maintenance — compact electric wash systems in enclosed environments where the RCV2G15E-F8M2I’s quiet NEMA 56C operation supports clean indoor cleaning without ventilation requirements
• Surface preparation for painting and sealing — wood decks, concrete driveways, and metal surfaces where the RCV2G15E-F8M2I’s controlled 1,500 PSI output cleans effectively before coating applications without over-etching the substrate

5-Year US Warranty, Full Rebuildability, and Wholesale Pricing

RC Series Electric Performance Backed by Domestic Support

The RCV2G15E-F8M2I is protected by Annovi Reverberi’s 5-year limited warranty through the US-based warranty and service network. Every internal wear component — solid ceramic plungers, brass manifold seals and o-rings, stainless valve seats and springs, Mini-Matic M2I unloader service parts, piston packing kits, and crankcase bearings — is stocked domestically through authorized distribution channels. Contractors, facility managers, OEM equipment builders, resellers, and volume buyers are invited to contact the WSHPWR wholesale team for pricing on the RCV2G15E-F8M2I and the complete Annovi Reverberi pump and unloader assembly line. WSHPWR maintains one of the most complete Annovi Reverberi inventories available through any US web store — with thousands of products in stock and a continually expanding catalog.

3,000 Cleaning Units. 1,500 PSI. 2.0 GPM. F8 NEMA 56C. Mini-Matic M2I. Integrated Chemical Injection.

Italian Engineering. Compact Electric Platform. Controlled Pressure. US Warranty Coverage.

For residential users, small shop operators, and OEM equipment builders who need 2.0 GPM at 1,500 PSI on a NEMA 56C electric motor platform — with F8 flange direct coupling for cabinet washers, garage systems, and compact electric builds, factory-matched Mini-Matic M2I integrated unloader with downstream chemical injection, quiet exhaust-free operation for indoor and residential applications, and a completely rebuildable platform backed by a 5-year US warranty — the RCV2G15E-F8M2I delivers a purpose-engineered compact electric solution from one of the global pressure pump industry’s most trusted manufacturers. Three thousand cleaning units. NEMA 56C direct couple. Integrated chemical injection. Five years of US warranty. A decade of service life.

Volume buyers can reach the WSHPWR wholesale team directly at wholesale@wshpwr.com to discuss pricing for quantity purchases across the complete Annovi Reverberi lineup.