RCV25G25DF7M2I Triplex Pump 2.5 GPM 2500 PSI | F7 Mount M2 Unloader

RCV25G25DF7M2I by Annovi Reverberi — RC Series Triplex Plunger Pump with Mini-Matic M2I Unloader and Chemical Injector | 2.5 GPM | 2,500 PSI | Brass Manifold | 3/4″ Hollow Keyway Shaft | SAE J609a Gas Engine Drive

The RCV25G25DF7M2I by Annovi Reverberi is a heavy-duty RC Series triplex ceramic plunger pump engineered for gas engine-driven pressure washing systems requiring 2.5 GPM at 2,500 PSI with factory-integrated downstream chemical injection capability. Rated at 2.5 GPM and 2,500 PSI, the RCV25G25DF7M2I delivers 6,250 cleaning units — combining 2.5 GPM output with 2,500 PSI cleaning force for residential upgrade and replacement installations, contractor property maintenance, light industrial cleaning, and mobile wash rigs — through a precision-machined brass manifold, solid ceramic plungers, stainless steel valves, heavy-duty bearings, and an F7 SAE J609a direct-drive flange with 3/4″ hollow keyway shaft for direct coupling to compatible gasoline engines. As part of Annovi Reverberi’s pump and unloader assemblies stocked and supported by WSHPWR, the RCV25G25DF7M2I arrives factory-configured and factory-tested, ready to deliver from the first startup.

The RCV25G25DF7M2I carries the factory-installed Mini-Matic M2I integrated unloader and chemical injector — delivering factory pre-set and adjustable pressure regulation with downstream chemical injection from a single compact, factory-configured assembly. Its direct-mount F7 configuration fits common gas-powered pressure washer frames without extensive modifications, making the RCV25G25DF7M2I a practical choice for replacement installs where minimizing downtime and fitment risk is a priority. Built by Annovi Reverberi in Modena, Italy — with US-based operations, a domestic parts distribution network, and dedicated technical support — this pump arrives pre-filled with factory break-in oil, factory-tested, and ready for installation. Protected by a 5-year US limited warranty and built to be fully rebuilt rather than replaced, the RCV25G25DF7M2I is a long-term investment capable of a decade of productive service life.

Factory-Matched and Approved — The RCV25G25DF7M2I Complete Assembly Advantage

No Mismatches. No Guesswork. No Warranty Risk. Just Install and Run.

Every RCV25G25DF7M2I ships as a factory-matched, factory-approved, and factory-installed complete pump and unloader assembly:

• Factory-matched M2I for 2,500 PSI — the Mini-Matic M2I integrated unloader and chemical injector are factory-calibrated for this pump’s 2.5 GPM / 2,500 PSI duty point. Pressure regulation and chemical draw characteristics are factory-set as a complete system.
• Factory-approved configuration — the complete assembly is Annovi Reverberi’s validated specification for this model. Operating with the factory-installed components maintains full 5-year warranty coverage.
• Factory-installed and tested — every RCV25G25DF7M2I exits the manufacturing facility with the M2I assembly mounted, calibrated, and tested for flow, pressure, and leak-free operation before shipment.
• Eliminates mismatch returns — the factory-matched assembly eliminates incorrect unloader or injector specification — the most common source of pump system returns — before the pump leaves the box.
• Stress-free installation — mount to the engine, connect system hoses, connect the detergent supply line to the injector port, add fuel, and start. The RCV25G25DF7M2I arrives engineered, assembled, and ready.

Decoding the RCV25G25DF7M2I Model Number

What Every Segment of This Annovi Reverberi Pump Designation Tells You

• RCV — Pump series: RC Series triplex plunger pump — Annovi Reverberi’s compact commercial gas engine pump platform
• 25G — Pump series identifier for this RCV configuration
• 25 — Maximum pressure: 2,500 PSI — 2.5 × 2,500 = 6,250 cleaning units
• D — Shaft version: Direct Drive — gas engine coupling per Annovi Reverberi model designation convention
• F7 — Flange type: SAE J609a direct-drive flange — close coupling to gas engines with a 3/4″ hollow keyway shaft (Annovi Reverberi part AR1579)
• M2 — Unloader family: Mini-Matic — factory-installed integrated unloader assembly with adjustable pressure regulation
• I — Chemical injector: Included — downstream soap injector factory-integrated into the Mini-Matic M2 assembly for chemical application and rinse capability

Key Specifications

RCV25G25DF7M2I Technical Details at a Glance

• Flow Rate: 2.5 GPM (gallons per minute)
• Maximum Pressure: 2,500 PSI
• Cleaning Units: 6,250 (GPM × PSI)
• Pump Type: RC Series triplex ceramic plunger pump — three-piston crankshaft-driven design for smooth, low-pulsation output
• Flange: F7 — SAE J609a direct-drive flange, 3/4″ hollow keyway shaft, gas engine compatible (Annovi Reverberi part AR1579)
• Manifold Material: Precision-machined brass — pressure stability and corrosion resistance
• Plungers: Solid ceramic — wear resistance and consistent sealing performance in stop-and-go cleaning cycles
• Valves: Stainless steel — corrosion resistance and durability under frequent pressure cycling
• Bearings: Heavy-duty — long-term tolerances under continuous gas engine operation
• Serviceability: Oil sight glass and vented dipstick for simplified routine maintenance
• Lubrication: Oil-bath crankcase with factory pre-filled break-in oil
• Unloader System: Mini-Matic M2I — factory pre-set and adjustable; integrated downstream chemical injector; factory-matched and factory-installed
• Connections: Banjo bolts and sealing O-rings — standard M2 family hardware supplied for secure, leak-resistant installation
• Chemical Injector: Included — downstream venturi injector factory-integrated into M2I Mini-Matic assembly
• Warranty: 5-year limited warranty — US-based coverage through Annovi Reverberi North America

What’s Included in the Box

A Complete, Factory-Configured RCV25G25DF7M2I Assembly Ready for Installation

• Factory-matched Mini-Matic M2I integrated unloader with active chemical injector — factory pre-set and installed for the 2.5 GPM / 2,500 PSI operating point; adjustable; injector port ready for detergent supply line connection
• Banjo bolts and sealing O-rings — standard M2 family hardware for secure, leak-resistant unloader connections
• Factory break-in oil — crankcase pre-filled to the correct operating level for first startup
• Oil sight glass and vented dipstick — at-a-glance oil level monitoring and simplified oil changes
• Mounting hardware — for F7 SAE J609a direct-drive flange installation on compatible gas engines
• Instruction manual and parts schematic — installation, startup, operating, and maintenance procedures with Annovi Reverberi part numbers for every serviceable component

Mini-Matic M2I Unloader — Chemical Application and Rinse at 2,500 PSI

Factory Pre-Set. Adjustable. Integrated Chemical Feed. Replacement-Ready Design.

• Factory pre-set and adjustable pressure regulation — the Mini-Matic M2I on the RCV25G25DF7M2I arrives calibrated for immediate 2,500 PSI operation with manual adjustment available for fine-tuning to match nozzle size and surface requirements
• Integrated downstream injection — draws detergent or pre-soak solution when the operator switches to low-pressure application mode. No separate injector hardware or additional plumbing required on the RCV25G25DF7M2I.
• Chemical application and rinse at 2.5 GPM / 2,500 PSI — chemical pre-soak breaks down contamination; full 2,500 PSI / 2.5 GPM rinse removes loosened material at 6,250 cleaning units. Switch between application and rinse without changing tools.
• Stable pressure control in stop-and-go duty cycles — the Mini-Matic M2I protects the RCV25G25DF7M2I against over-pressurization during the frequent trigger cycling typical of residential and light commercial cleaning operations
• Compact integrated assembly for fast replacement installs — the M2I’s direct-mount configuration on the RCV25G25DF7M2I fits common gas-powered pressure washer frames without extensive modifications, reducing downtime and fitment risk on replacement and upgrade installations
• Injector maintenance — flush the injector circuit with clean water after every detergent session to preserve long-term venturi function on the RCV25G25DF7M2I

Typical Applications

Where the RCV25G25DF7M2I Delivers Best Results

• Residential pressure washers needing upgrade or replacement pumps — the RCV25G25DF7M2I’s F7 direct-mount compatibility with common gas engine frames, factory-matched M2I assembly, and integrated chemical capability make it a practical drop-in upgrade for residential systems requiring improved output and durability
• Contractor units for property maintenance and surface cleaning — 2,500 PSI cleaning force and on-demand chemical application handle driveways, siding, storefronts, and general property surfaces on portable gas engine contractor rigs
• Light industrial cleaning of machinery, tools, and work areas — the RCV25G25DF7M2I’s heavy-duty bearings and brass-and-ceramic construction support continuous-duty light industrial cleaning where reliability and long service intervals matter
• Mobile wash rigs and small fleet-cleaning systems — compact F7 direct-drive design and factory-matched M2I assembly support efficient integration into mobile contractor and small fleet washing systems

For operators who prefer a fully configured direct-drive system rather than a bare pump assembly, WSHPWR also carries complete gas and diesel engine pump packages ready to mount on a frame or trailer.

5-Year US Warranty, Full Rebuildability, and Wholesale Pricing

RC Series Performance Backed by Domestic Support

The RCV25G25DF7M2I is protected by Annovi Reverberi’s 5-year limited warranty through the US-based warranty and service network. Every internal wear component — solid ceramic plungers, brass manifold seals and o-rings, stainless valve seats and springs, Mini-Matic M2I unloader service parts, piston packing kits, and crankcase bearings — is stocked domestically through authorized distribution channels. Contractors, fleet operators, facility managers, OEM equipment builders, resellers, and volume buyers are invited to contact the WSHPWR wholesale team for pricing on the RCV25G25DF7M2I and the complete Annovi Reverberi pump and unloader assembly line. WSHPWR maintains one of the most complete Annovi Reverberi inventories available through any US web store — with thousands of products in stock and a continually expanding catalog.

6,250 Cleaning Units. 2,500 PSI. 2.5 GPM. F7 SAE J609a. Mini-Matic M2I. Integrated Chemical Injection.

Italian Engineering. Gas Engine Direct Drive. Factory-Approved Mini-Matic Assembly. US Warranty Coverage.

For residential users, commercial contractors, light industrial teams, and mobile wash operators who need 2.5 GPM at 2,500 PSI on a gas engine platform — with F7 SAE J609a direct-drive flange for 3/4″ hollow keyway shaft engine coupling, factory-matched Mini-Matic M2I integrated unloader with downstream chemical injection, heavy-duty bearing construction for long service intervals, and a completely rebuildable platform backed by a 5-year US warranty — the RCV25G25DF7M2I delivers a purpose-engineered compact commercial solution from one of the global pressure pump industry’s most trusted manufacturers. Six thousand two hundred fifty cleaning units. Direct gas engine drive. Integrated chemical injection. Five years of US warranty. A decade of service life.

Volume buyers can reach the WSHPWR wholesale team directly at wholesale@wshpwr.com to discuss pricing for quantity purchases across the complete Annovi Reverberi lineup.