XMASS18G15E-F33-B | 1.8 GPM 1500 PSI Pump SS Head BUNA Seals

XMASS18G15E-F33-B — Stainless Electric Triplex Pump with Buna Seals,

1.8 GPM, 1,500 PSI, 1,750 RPM (56C Direct-Drive)

The XMASS18G15E-F33-B is a compact stainless-steel triplex plunger pump built for OEM panels and skid systems that demand
chemical compatibility, small footprints, and dependable day-to-day operation. Running at a standard 1,750 RPM, it delivers
a controlled 1.8 GPM at 1,500 PSI with smooth, repeatable output—ideal for light industrial washdown, chemical dosing with
water-based detergents, and USDA-style sanitation tasks where uptime and easy service matter.

To balance durability and value, this model combines an AISI 316 stainless-steel manifold with Buna-N (NBR) seals.
The stainless wet end resists corrosion and scaling in damp or detergent-rich environments, while Buna seals offer a cost-effective
choice for systems using neutral or mildly alkaline cleaners (and many water-based chemistries). Ceramic plungers,
stainless valves, and oversized bearings support long service intervals and stable pressure under continuous
duty. Commissioning is fast thanks to the integrated F-33 (NEMA 56C) face and 5/8″ hollow shaft that couple
directly to TEFC motors—no adapters required—shrinking the footprint on wall panels, compact skids, and enclosed cabinets.

Every unit is factory-tested to verify flow and pressure, ships pre-filled with break-in oil, and includes an
oil sight glass, vented dipstick, and complete documentation with schematics. Backed by a
5-year commercial warranty and U.S.-based support, the XMASS18G15E-F33-B provides reliable, stainless performance with Buna
seal compatibility for cost-sensitive, light-duty chemical and sanitation programs.
Always verify seal and stainless compatibility, concentration, and temperature limits for your specific detergents and process media.

Key Features & Specifications

• Output: 1.8 GPM at 1,500 PSI — controlled flow and pressure for targeted cleaning
• Speed: 1,750 RPM — standard 4-pole electric motor speed
• Construction: AISI 316 stainless manifold with stainless valves for corrosion resistance
• Seals: Buna-N (NBR) seals — value-focused compatibility with water-based and mild cleaners
• Drive: F-33 / NEMA 56C face and 5/8″ hollow shaft for direct motor coupling
• Durability: Ceramic plungers and oversized bearings for long life and stable pressure
• Serviceability: Oil sight glass and vented dipstick simplify daily checks
• Quality & assurance: Factory-tested; ships pre-oiled; 5-year commercial warranty with U.S. support

Recommended Applications

• Food & beverage washdown: Small-area rinsing, post-CIP touch-ups, and sanitation with neutral or mildly alkaline detergents*
• Light industrial cleaning: Parts benches, fixtures, and equipment bays
• Chemical handling (water-based): Dosing, transfer, and rinse manifolds
• USDA-style sanitation: Lines, conveyors, and packaging areas*
• Restaurant hood & duct contractors: Compact electric rigs for indoor service
• OEM/skid integrations: Cabinet enclosures, wall panels, and mobile carts
• Biotech & lab sanitation: Enclosed panels requiring chemical-resistant components

*Confirm detergent/sanitizer compatibility and temperature limits for stainless and Buna-N components.

Integration & Maintenance Best Practices

• Protect the inlet: Use oversized filtration and short, unrestricted suction plumbing to minimize cavitation.
• Unloader & bypass: Size correctly; avoid extended bypass to control heat rise; add thermal relief where needed.
• Prime before start: Flow clean water through the pump to prevent dry-running and seal damage.
• Alignment: Ensure accurate 56C motor coupling and rigid mounting to reduce bearing and seal wear.
• Post-chemical rinse: Flush with water after detergent service to extend seal life.
• Oil care: Monitor via sight glass; change on schedule with non-detergent pump oil; winterize for freezing environments.

XMASS18G15E-F33-B

XMASS18G15E-F33-B stainless pressure washer pump—1.8 GPM, 1,500 PSI, 1,750 RPM,
56C (F-33) direct-drive, Buna seals, ceramic plungers, and an AISI 316 manifold—delivers
compact, value-focused performance for food & beverage washdown, light industrial cleaning, Biotech & lab sanitation enclosed panels requiring chemical-resistant components.