RCV3G27D-F7V2I Gas Triplex Pump | 3.0 GPM 2700 PSI

RCV3G27D-F7V2I by Annovi Reverberi — RC Series Triplex Plunger Pump with VRC-B Unloader and Chemical Injector | 3.0 GPM | 2,700 PSI | Brass Manifold | 3/4″ Hollow Keyway Shaft | SAE J609a Gas and Diesel Engine Drive

The RCV3G27D-F7V2I by Annovi Reverberi is a professional-grade RC Series triplex ceramic plunger pump engineered for gas and diesel engine-driven pressure washing systems requiring 3.0 GPM at 2,700 PSI with factory-integrated downstream chemical injection capability. Rated at 3.0 GPM and 2,700 PSI at 3,400 RPM, the RCV3G27D-F7V2I delivers 8,100 cleaning units — combining 3.0 GPM focused output with 2,700 PSI cleaning force for residential cleaning, vehicle washing, commercial storefronts, service bays, equipment maintenance, and agricultural applications — through a precision-machined brass manifold, solid ceramic plungers, stainless steel valves, and an F7 SAE J609a direct-drive flange with 3/4″ hollow keyway shaft for direct coupling to compatible gasoline or diesel engines.

The RCV3G27D-F7V2I carries the factory-installed VRC-B series adjustable unloader — specifically engineered for the RC Series pump platform — with integrated downstream chemical injection. Factory pre-set and manually adjustable, the V2I assembly delivers precise pressure regulation and two-mode wash capability from a single factory-configured, factory-approved assembly. Built by Annovi Reverberi in Modena, Italy — with US-based operations, a domestic parts distribution network, and dedicated technical support — this pump arrives pre-filled with factory break-in oil, factory-tested, and ready for installation. Protected by a 5-year US limited warranty and built to be fully rebuilt rather than replaced, the RCV3G27D-F7V2I is a long-term investment capable of a decade of productive service life.

Factory-Matched and Approved — The RCV3G27D-F7V2I Complete Assembly Advantage

No Mismatches. No Guesswork. No Warranty Risk. Just Install and Run.

Every RCV3G27D-F7V2I ships as a factory-matched, factory-approved, and factory-installed complete pump and unloader assembly:

• Factory-matched V2I for 2,700 PSI — the VRC-B series unloader and integrated injector on the RCV3G27D-F7V2I are factory-calibrated for this pump’s 3.0 GPM / 2,700 PSI duty point. Pressure regulation and chemical draw characteristics are factory-set as a complete system.
• Factory-approved configuration — the complete assembly is Annovi Reverberi’s validated specification for this model. Operating with the factory-installed components maintains full 5-year warranty coverage.
• Factory-installed and tested — every RCV3G27D-F7V2I exits the manufacturing facility with the V2I assembly mounted, calibrated, and tested for flow, pressure, and leak-free operation before shipment.
• Eliminates mismatch returns — the factory-matched assembly eliminates incorrect unloader or injector specification — the most common source of pump system returns — before the pump leaves the box.
• Stress-free installation — mount to the engine, connect system hoses, connect the detergent supply line to the injector port, add fuel, and start. The RCV3G27D-F7V2I arrives engineered, assembled, and ready.

Decoding the RCV3G27D-F7V2I Model Number

What Every Segment of This Annovi Reverberi Pump Designation Tells You

• RCV — Pump series: RC Series triplex plunger pump — Annovi Reverberi’s compact commercial gas engine pump platform
• 3G — Flow rate: 3.0 GPM
• 27 — Maximum pressure: 2,700 PSI — 3.0 × 2,700 = 8,100 cleaning units
• D — Shaft version: Direct Drive — 3,400 RPM operating speed for direct gas and diesel engine coupling
• F7 — Flange type: SAE J609a direct-drive flange — close coupling to gas or diesel engines with a 3/4″ hollow keyway shaft (Annovi Reverberi part AR1579)
• V2I — Unloader and injector: VRC-B series adjustable unloader — factory-preset and manually adjustable; with integrated downstream chemical injector (I suffix) for two-mode wash capability

RCV3G27D Gas Engine Family — V2I vs M2I

Both models share the same RC Series platform, F7 SAE J609a flange, 3/4″ hollow shaft, and 3.0 GPM / 2,700 PSI / 8,100 CU output. The unloader family is the key difference:

• RCV3G27D-F7V2I (this model) — VRC-B series unloader with integrated injector. Factory pre-set and adjustable. RC Series-specific unloader design.
• RCV3G27D-F7M2I — Mini-Matic M2I integrated unloader with thermal relief and injector. Compact manifold-integrated design.

Key Specifications

RCV3G27D-F7V2I Technical Details at a Glance

• Flow Rate: 3.0 GPM (gallons per minute)
• Maximum Pressure: 2,700 PSI
• Cleaning Units: 8,100 (GPM × PSI)
• Operating Speed: 3,400 RPM
• Pump Type: RC Series triplex ceramic plunger pump — three-piston crankshaft-driven design for smooth, low-pulsation output
• Flange: F7 — SAE J609a direct-drive flange, 3/4″ hollow keyway shaft, gas and diesel engine compatible (Annovi Reverberi part AR1579)
• Manifold Material: Precision-machined brass — corrosion resistance and durability for continuous pressure washing use
• Plungers: Solid ceramic — exceptional wear resistance and thermal stability
• Valves: Stainless steel — precise sealing and long service life under continuous cycling
• Serviceability: Oil sight glass and vented dipstick for simplified routine maintenance
• Lubrication: Oil-bath crankcase with factory pre-filled break-in oil
• Unloader System: VRC-B series V2I — factory pre-set and manually adjustable; factory-matched and factory-installed for this RC Series pump model
• Connections: Banjo bolts and sealing O-rings — standard VR family hardware supplied for secure, leak-resistant installation
• Chemical Injector: Included — downstream venturi injector factory-integrated into V2I assembly
• Warranty: 5-year limited warranty — US-based coverage through Annovi Reverberi North America

What’s Included in the Box

A Complete, Factory-Configured RCV3G27D-F7V2I Assembly Ready for Installation

• Factory-matched VRC-B series V2I unloader with active chemical injector — factory pre-set and installed for the 3.0 GPM / 2,700 PSI operating point; manually adjustable; injector port ready for detergent supply line connection
• Banjo bolts and sealing O-rings — standard VR family hardware for secure, leak-resistant unloader connections
• Factory break-in oil — crankcase pre-filled to the correct operating level for first startup
• Oil sight glass and vented dipstick — at-a-glance oil level monitoring and simplified oil changes
• Mounting hardware — for F7 SAE J609a direct-drive flange installation on compatible gas or diesel engines
• Operator’s manual — complete installation, startup, operating, and maintenance procedures including oil change intervals, chemical injector care, and winterization protocol
• Parts schematic — exploded-view diagram with Annovi Reverberi part numbers for every serviceable component

VRC-B V2I Unloader — Two-Mode Platform at 2,700 PSI

Factory Pre-Set. Adjustable. Integrated Chemical Feed. RC Series Engineered.

• RC Series-specific unloader design — the VRC-B series unloader on the RCV3G27D-F7V2I is engineered specifically for the RC pump platform, providing factory-calibrated pressure regulation matched to this pump’s 3.0 GPM / 2,700 PSI output characteristics
• Factory pre-set and manually adjustable — arrives calibrated for immediate operation at 2,700 PSI on the RCV3G27D-F7V2I with manual adjustment available for fine-tuning pressure output to match specific surface types, nozzle sizes, and cleaning tasks
• Bypass protection at trigger release — the V2I unloader redirects water flow when the trigger gun is released on the RCV3G27D-F7V2I, protecting the pump from pressure spikes and allowing operators to pause between cleaning cycles without stress on internal components
• Integrated downstream injection — draws detergent or pre-soak solution when the operator switches to low-pressure application mode. No separate injector hardware required on the RCV3G27D-F7V2I.
• Two-mode workflow at 3.0 GPM / 2,700 PSI — chemical pre-soak breaks down contamination; full 2,700 PSI / 3.0 GPM rinse removes loosened material at 8,100 cleaning units. Switch between modes without changing tools.
• Injector maintenance — flush the injector circuit with clean water after every detergent session to preserve long-term venturi function on the RCV3G27D-F7V2I

Typical Applications

Where the RCV3G27D-F7V2I Delivers Best Results

• Residential cleaning — driveways, siding, decks, patios, and outdoor furniture where the RCV3G27D-F7V2I’s factory-integrated two-mode capability handles chemical pre-soak and rinse from a single engine-driven assembly
• Vehicle washing — cars, trucks, motorcycles, boats, and recreational vehicles where 2,700 PSI output and integrated detergent injection handle surface contamination efficiently on gas engine-powered portable systems
• Commercial cleaning — storefronts, sidewalks, parking areas, and service bays where the RCV3G27D-F7V2I’s consistent 3,400 RPM direct-drive output and two-mode capability deliver professional results
• Industrial and equipment cleaning — machinery, shop floors, and concrete surfaces where 3.0 GPM output and 2,700 PSI impact handle industrial contamination on gas engine-powered rigs
• Agricultural applications — tractors, implements, trailers, and livestock equipment where the RCV3G27D-F7V2I’s compact engine-driven design handles varied agricultural cleaning with on-demand chemical capability

For operators who prefer a fully configured engine-driven system rather than a bare pump assembly, WSHPWR also carries complete gas and diesel engine pump packages ready to mount on a frame or trailer.

5-Year US Warranty, Full Rebuildability, and Wholesale Pricing

RC Series Performance Backed by Domestic Support

The RCV3G27D-F7V2I is protected by Annovi Reverberi’s 5-year limited warranty through the US-based warranty and service network. Every internal wear component — solid ceramic plungers, brass manifold seals and o-rings, stainless valve seats and springs, VRC-B series V2I unloader service parts, piston packing kits, and crankcase bearings — is stocked domestically through authorized distribution channels. Contractors, fleet operators, facility managers, resellers, and volume buyers are invited to contact the WSHPWR wholesale team for pricing on the RCV3G27D-F7V2I and the complete Annovi Reverberi pump and unloader assembly line. WSHPWR maintains one of the most complete Annovi Reverberi inventories available through any US web store — with thousands of products in stock and a continually expanding catalog.

8,100 Cleaning Units. 2,700 PSI. 3.0 GPM. F7 SAE J609a. VRC-B V2I. Two-Mode.

Italian Engineering. Gas and Diesel Engine Platform. Factory-Approved VRC-B Assembly. US Warranty Coverage.

For residential users, commercial contractors, fleet operators, agricultural teams, and equipment maintenance professionals who need 3.0 GPM at 2,700 PSI on a gas or diesel engine platform — with F7 SAE J609a direct-drive flange for 3/4″ hollow keyway shaft engine coupling, factory-matched VRC-B series V2I unloader with integrated chemical injection, and a completely rebuildable platform backed by a 5-year US warranty — the RCV3G27D-F7V2I delivers a purpose-engineered compact commercial solution from one of the global pressure pump industry’s most trusted manufacturers. Eight thousand one hundred cleaning units. Direct engine drive. Two-mode chemical capability. Five years of US warranty. A decade of service life.

Volume buyers can reach the WSHPWR wholesale team directly at wholesale@wshpwr.com to discuss pricing for quantity purchases across the complete Annovi Reverberi lineup.