XMASS18G15E-F33 | 1.8 GPM 1500 PSI Pump SS Head 56C Mount Duty

XMASS18G15E-F33 — Stainless Electric Triplex Pump, 1.8 GPM, 1,500 PSI, 1,750 RPM (56C Direct-Drive)

The XMASS18G15E-F33 is a compact stainless-steel triplex plunger pump designed for OEM panels and skid systems where space, chemical resistance, and motor-ready integration are critical. Operating at a standard 1,750 RPM, it delivers a controlled 1.8 GPM at 1,500 PSI with smooth, repeatable output—ideal for light industrial and commercial cleaning, precision rinse stations, and chemical-handling applications that value accuracy and uptime. The triplex architecture minimizes pulsation for more consistent tool performance and cleaner process results.

Engineered for harsh washdown and chemical environments, the XMASS18G15E-F33 employs an AISI 316 stainless-steel manifold to resist corrosion and scaling, paired with Viton® seals that tolerate aggressive detergents, sanitizers, and select solvents. Ceramic plungers help the pump maintain sealing integrity through thermal cycling and continuous-duty operation. Commissioning is fast thanks to an F-33 (NEMA 56C) face and 5/8″ hollow shaft that couple directly to common TEFC motors—no adapters required—shrinking the footprint on wall panels, compact skids, and enclosed cabinets.

Why Stainless Steel & Viton Matter

Sanitation and detergent-heavy processes challenge pumps with moisture, pH swings, and temperature variation. The stainless Steel wet end protects critical sealing surfaces against pitting and rust, while Viton seals provide durable chemical compatibility for long service intervals and fewer leak-related stoppages. The result is predictable performance and a lower total cost of ownership in environments where compliance and cleanliness are non-negotiable. Always verify chemical compatibility, concentration, and allowable temperatures for your specific media.

Key Features & Specifications for XMASS18G15E-F33

• Output: 1.8 GPM at 1,500 PSI — controlled flow for targeted cleaning and rinse
• Speed: 1,750 RPM — standard 4-pole electric motor speed
• Construction: AISI 316 stainless manifold with stainless valves for corrosion resistance
• Seals: Viton® seals for aggressive detergents and sanitizers
• Drive: F-33 / NEMA 56C face and 5/8″ hollow shaft for direct motor coupling
• Durability: Ceramic plungers reduce wear and support stable pressure under continuous duty
• Serviceability: Ships pre-filled with break-in oil and includes oil sight glass and vented dipstick
• Quality & assurance: Factory-tested for flow/pressure; backed by a 5-year commercial warranty with U.S. support

Recommended Applications for XMASS18G15E-F33

• Chemical handling & dosing: Controlled flow to instruments, injectors, and small spray manifolds
• Biotech rinse & sanitation: Compact, motor-ready modules for validated cleaning steps*
• OEM/skid washdown: Tight-space panels, carts, and cabinet enclosures
• Light industrial maintenance: Targeted degreasing and parts cleaning
• Food & beverage: Small-area washdown and post-CIP touch-ups*

*Confirm detergent/sanitizer compatibility and temperature limits for stainless and Viton components.

Integration & Maintenance Best Practices for XMASS18G15E-F33

• Protect the inlet: Use oversized filtration and short, unrestricted suction plumbing to minimize cavitation.
• Unloader & bypass: Size correctly; avoid extended bypass to control heat rise.
• Prime before start: Flow clean water through the pump to prevent dry-running and seal damage.
• Alignment: Ensure proper 56C motor coupling; verify shaft support and rigid mounting.
• Oil care: Monitor via sight glass; change on schedule with non-detergent pump oil.
• Post-chemical rinse: Flush with clean water after detergent or solvent service to extend seal life.

Summary

XMASS18G15E-F33 stainless-steel pressure washer pump—1.8 GPM, 1,500 PSI, 1,750 RPM, 56C (F-33) direct-drive, Viton seals, and ceramic plungers—delivers compact, chemical-resistant performance for chemical handling, biotech rinse and sanitation, OEM/skid washdown, light industrial cleaning, and food & beverage processing. Factory-tested, pre-oiled, and supported by a 5-year commercial warranty, it provides dependable, motor-ready power in space-constrained installations.