MVYF1/2 | 1/2 F x 1/2 F Brass Y-Filter, 45 Mesh 225 PSI

MVYF1/2 | 1/2 F x 1/2 F Brass Y-Filter, 45 Mesh 225 PSI

Compact brass Y-filter for small to mid-size systems

• The AR MVYF1/2 Brass Y-Filter is a durable inline filtration component
  designed to keep water supply lines clean and protect pumps, injectors, unloaders, and spray
  tips from debris.
• Features a compact Y-style body with 1/2 in F x F NPT ports
  and a 45-mesh stainless-steel screen, rated to 225 PSI.
• Suitable for pressure-washing, irrigation, booster systems, and general fluid-transfer
  applications where reliable debris capture and low maintenance are essential.

Filtration Performance

45-mesh stainless screen for debris protection

• Fine 45-mesh stainless-steel screen intercepts sand, rust flakes, pipe
  scale, and mineral grit before they reach sensitive components.
• Mesh construction maintains shape and aperture accuracy after repeated cleaning, resisting
  deformation and corrosion in varied water conditions.
• Captured debris settles in the leg of the Y instead of recirculating, helping maintain
  stable inlet conditions and consistent spray patterns.
• Filtration ahead of key components reduces abrasion, clogging, injector draw issues, and
  pressure fluctuations at the gun.

Construction & Design

Robust brass body with low-restriction Y-flow

• MVYF1/2 Corrosion-resistant brass housing provides strength and chemical
  compatibility with common cleaners and detergents used in wash operations.
• Thick-walled body resists impact, thread galling, and repeated service cycles, preserving
  sealing surfaces and thread integrity.
• Y-style configuration positions the screen at an angle to maintain steady flow with
  minimal pressure drop, supporting pump priming and reducing cavitation risk.
• Compact footprint fits easily into tight plumbing runs on mobile rigs, wall-mounted bays,
  commercial carts, and small booster sets.

MVYF1/2 | 1/2 F x 1/2 F Brass Y-Filter, 45 Mesh 225 PSI

1/2 in F x F NPT inline mounting

• Equipped with 1/2 inch female x 1/2 inch female NPT ports for direct
  connection to standard fittings, hoses, unions, or ball valves.
• Can be installed upstream of the pump or injector as first-line protection
  in pressure-washing and transfer systems.
• Supports horizontal or vertical mounting without affecting filtration
  performance, simplifying layout around space and hose routing.
• Best practice is to position the filter as close as practical to the equipment inlet and
  use nearby unions or quick disconnects for isolation and service access.

Service & Maintenance

Quick cap access for fast cleaning

• Low-restriction Y-body keeps flow stable between cleanings while debris remains trapped in
  the filter leg.
• Quick-access cap allows technicians to relieve pressure, unthread the cap,
  remove the screen, and rinse it clean in minutes, minimizing downtime.
• Simple, tool-light procedure encourages regular service intervals that preserve consistent
  injector performance and nozzle patterns.
• Recommended practices include setting a cleaning schedule based on water quality and run
  hours and flushing with fresh water after detergent use to keep the mesh clear.

Operational Benefits

Protection for pumps, injectors, and spray tips

• MVYF1/2 Helps extend pump seal life by preventing abrasive particles from reaching plungers, check
  valves, and regulators.
• Reduces unplanned stoppages caused by clogged nozzles or injector issues, improving
  productivity in mobile detailing, small wash bays, and agricultural or light industrial
  systems.
• Supports stable injector Venturi action, predictable regulator response, and clean, uniform
  spray patterns at the gun.
• Manufactured and tested to AR North America quality standards for precise
  threading, screen fit, and pressure tolerance, ensuring long, reliable service life.

MVYF1/2 | 1/2 F x 1/2 F Brass Y-Filter, 45 Mesh 225 PSI

Compact brass Y-filter for dependable inline protection

• The AR MVYF1/2 1/2 in Brass Y-Filter combines a rugged brass body, a
  45-mesh stainless screen, and a maintenance-friendly Y layout to provide reliable debris
  protection up to 225 PSI.
• Ideal for pressure washer plumbing, injector support, irrigation circuits, and small
  booster systems where clean, uninterrupted flow is critical.
• By stabilizing inlet conditions and shielding high-value components, it helps users reduce
  wear, minimize downtime, and maintain consistent system performance over time.