RCV3G27D-F8M2I Electric Triplex Pump | 3.0 GPM 2700 PSI

RCV3G27D-F8M2I by Annovi Reverberi — RC Series Electric Triplex Plunger Pump with Mini-Matic M2I Unloader and Chemical Injector | 3.0 GPM | 2,700 PSI | Forged Brass Manifold | 5/8″ Hollow Shaft | NEMA 56C F8 Electric Motor Mount | 3,400 RPM

The RCV3G27D-F8M2I by Annovi Reverberi is a compact commercial-duty RC Series triplex ceramic plunger pump engineered for NEMA 56C electric motor-driven pressure washing systems requiring 3.0 GPM at 2,700 PSI with factory-integrated downstream chemical injection capability. Rated at 3.0 GPM and 2,700 PSI at 3,400 RPM, the RCV3G27D-F8M2I delivers 8,100 cleaning units — combining 3.0 GPM focused output with 2,700 PSI cleaning force for detail shops, auto prep stations, fleet wash operations, maintenance facilities, electric cabinet pressure washers, and compact skid systems — through a forged brass manifold, solid ceramic plungers, stainless steel valves, oversized bearings, and an F8 NEMA 56C flange with 5/8″ hollow shaft for direct coupling to compatible electric motors.

The RCV3G27D-F8M2I carries the factory-installed Mini-Matic M2I integrated unloader and manifold assembly — delivering balanced pressure control, thermal relief bypass routing, simplified plumbing, and downstream chemical injection from a single factory-configured, factory-approved assembly with fewer leak points than external unloader systems. Built by Annovi Reverberi in Modena, Italy — with US-based operations, a domestic parts distribution network, and dedicated technical support — this pump arrives pre-filled with factory break-in oil, factory-tested, and ready for installation. Protected by a 5-year US limited warranty and built to be fully rebuilt rather than replaced, the RCV3G27D-F8M2I is a long-term commercial investment capable of a decade of productive service life.

Factory-Matched and Approved — The RCV3G27D-F8M2I Complete Assembly Advantage

No Mismatches. No Guesswork. No Warranty Risk. Just Install and Run.

Every RCV3G27D-F8M2I ships as a factory-matched, factory-approved, and factory-installed complete pump and unloader assembly:

• Factory-matched M2I for 2,700 PSI — the Mini-Matic M2I integrated unloader and injector are factory-calibrated for this pump’s 3.0 GPM / 2,700 PSI duty point. Pressure regulation, thermal relief bypass routing, and chemical draw characteristics are factory-set as a complete system.
• Factory-approved configuration — the complete assembly is Annovi Reverberi’s validated specification for this model. Operating with the factory-installed components maintains full 5-year warranty coverage.
• Factory-installed and tested — every RCV3G27D-F8M2I exits the manufacturing facility with the M2I assembly mounted, calibrated, and tested for flow, pressure, and leak-free operation before shipment.
• Eliminates mismatch returns — the factory-matched assembly eliminates incorrect unloader or injector specification — the most common source of pump system returns — before the pump leaves the box.
• Installation-ready — confirm NEMA 56C motor compatibility, mount via the F8 flange, connect system hoses, connect the detergent supply line to the injector port, and start. The RCV3G27D-F8M2I arrives engineered, assembled, and ready.

Decoding the RCV3G27D-F8M2I Model Number

What Every Segment of This Annovi Reverberi Pump Designation Tells You

• RCV — Pump series: RC Series triplex plunger pump — Annovi Reverberi’s compact commercial electric motor pump platform
• 3G — Flow rate: 3.0 GPM
• 27 — Maximum pressure: 2,700 PSI — 3.0 × 2,700 = 8,100 cleaning units
• D — Shaft version: Direct Drive — 3,400 RPM operating speed per Annovi Reverberi model designation convention
• F8 — Flange type: NEMA 56C flange — direct coupling to NEMA 56C electric motors with 5/8″ hollow shaft (Annovi Reverberi part AR1584)
• M2 — Unloader family: Mini-Matic — factory-installed integrated unloader and manifold assembly with thermal relief and balanced bypass routing
• I — Chemical injector: Included — downstream soap injector factory-integrated into the Mini-Matic M2 assembly for two-mode wash capability

Key Specifications

RCV3G27D-F8M2I Technical Details at a Glance

• Flow Rate: 3.0 GPM (gallons per minute / 11.4 L/min)
• Maximum Pressure: 2,700 PSI
• Cleaning Units: 8,100 (GPM × PSI)
• Operating Speed: 3,400 RPM
• Maximum Fluid Temperature: 140°F (60°C)
• Pump Type: RC Series triplex ceramic plunger pump — three-piston crankshaft-driven design for smooth, low-pulsation output
• Flange: F8 — NEMA 56C electric motor flange, 5/8″ hollow shaft (Annovi Reverberi part AR1584)
• Motor Compatibility: NEMA 56C electric motors; 2–3 HP recommended depending on voltage and duty cycle
• Inlet Port: 1/2″ FPT
• Discharge Port: 3/8″ FPT
• Head Material: Forged brass — corrosion resistance and durability in continuous wet-service environments
• Plungers: Solid ceramic — wear resistance and stable long-term sealing performance
• Valves: Stainless steel — corrosion resistance and consistent seating under continuous cycling
• Crankcase: Die-cast aluminum with heat-dissipating fins — temperature stability at 3,400 RPM
• Bearings: Oversized — extended service life under continuous operation
• Oil Capacity: Approximately 9–10 oz
• Unloader System: Mini-Matic M2I — integrated manifold assembly with thermal relief bypass and downstream chemical injector; factory-matched and factory-installed
• Chemical Injector: Included — downstream venturi injector factory-integrated into M2I Mini-Matic assembly
• Warranty: 5-year limited warranty — US-based coverage through Annovi Reverberi North America

What’s Included in the Box

A Complete, Factory-Configured RCV3G27D-F8M2I Assembly Ready for Installation

• Factory-matched Mini-Matic M2I integrated unloader with active chemical injector — installed and calibrated for the 3.0 GPM / 2,700 PSI operating point; thermal relief bypass routing included; injector port ready for detergent supply line connection
• Banjo bolts and sealing O-rings — standard M2 family hardware for secure, leak-resistant unloader connections
• Factory break-in oil — crankcase pre-filled to the correct operating level (~9–10 oz) for first startup
• External oil fill and sight glass — at-a-glance oil level monitoring and simplified oil changes
• Mounting hardware — for F8 NEMA 56C electric motor installation
• Operator’s manual — complete installation, startup, operating, and maintenance procedures including oil change intervals, chemical injector care, and winterization protocol
• Parts schematic — exploded-view diagram with Annovi Reverberi part numbers for every serviceable component

Mini-Matic M2I Unloader — Thermal Relief. Integrated Chemical Feed. Compact Manifold Design.

Factory-Approved. Balanced Bypass. Two-Mode Platform at 2,700 PSI.

• Thermal relief and balanced bypass routing — the M2I’s integrated manifold assembly on the RCV3G27D-F8M2I manages bypass water temperature during idle cycles, protecting seals in extended trigger-off periods. This thermal relief function is particularly valuable in cabinet-style and enclosed electric wash systems where heat management is critical.
• Fewer leak points than external unloader systems — the M2I’s compact integrated manifold layout eliminates external bypass plumbing lines, reducing total system fitting count and improving OEM packaging and service access on the RCV3G27D-F8M2I
• Integrated downstream injection — draws detergent or pre-soak solution when the operator switches to low-pressure application mode. No separate injector hardware required on the RCV3G27D-F8M2I.
• Two-mode workflow at 3.0 GPM / 2,700 PSI — chemical pre-soak breaks down contamination; full 2,700 PSI / 3.0 GPM rinse removes loosened material at 8,100 cleaning units. Switch between modes without changing tools.
• Compact manifold layout — improves OEM packaging in cabinet-style pressure washers, cart-mounted systems, and compact skid builds where space for plumbing and unloader routing is limited on the RCV3G27D-F8M2I
• Injector maintenance — flush the M2I injector circuit with clean water after every detergent session; follow Annovi Reverberi’s recommended bypass routing for safe thermal operation

F8 NEMA 56C Electric Motor Platform — Compact Direct Coupling at 3,400 RPM

Direct Motor Mount. 5/8″ Hollow Shaft. 2–3 HP Compatible. Cabinet and Skid System Ready.

• F8 flange with NEMA 56C interface — the RCV3G27D-F8M2I mounts directly to compatible NEMA 56C electric motors via the F8 flange and 5/8″ hollow shaft, providing a rigid, precise motor-to-pump connection that eliminates couplers and reduces vibration. Confirm motor horsepower and compatibility before installation.
• 2–3 HP motor range — the RCV3G27D-F8M2I is sized for the 2–3 HP NEMA 56C motor class commonly used in cabinet pressure washers, portable cart-mounted systems, and compact electric skids. Verify adequate motor horsepower for your specific voltage and duty cycle before installation.
• Rigid vibration-stable platform required — install the RCV3G27D-F8M2I on a rigid, vibration-stable platform for best bearing and seal life at 3,400 RPM operating speed
• 120V and 230V motor compatibility — the F8 NEMA 56C interface supports both 120V and 230V electric motor configurations, making the RCV3G27D-F8M2I flexible for a range of shop, facility, and mobile electric cleaning system builds
• Oversized bearings for continuous 3,400 RPM operation — larger bearing contact surfaces manage radial loads at operating speed, extending the RCV3G27D-F8M2I’s service life under daily commercial use

Typical Applications

Where the RCV3G27D-F8M2I Delivers Best Results

• Detail shops and auto prep stations — consistent 2,700 PSI performance and factory-integrated two-mode capability make the RCV3G27D-F8M2I ideal for vehicle detailing and surface prep operations requiring both chemical application and rinse capability from a single compact assembly
• Maintenance and repair facilities — cleaning tools, bays, and equipment where the RCV3G27D-F8M2I’s compact footprint, electric operation, and M2I thermal relief protection support reliable all-day performance in enclosed shop environments
• Fleet wash operations — vans, pickups, utility vehicles, and trailers where integrated chemical injection and 2,700 PSI output handle road film and surface contamination efficiently without external injector hardware
• Electric cabinet pressure washers — shops, plants, and warehouses where the RCV3G27D-F8M2I’s compact manifold layout, F8 direct mount, and M2I thermal relief design are specifically engineered for enclosed electric cabinet system applications
• Portable cart-mounted and compact skid systems — 120V or 230V motor builds where the RCV3G27D-F8M2I’s small footprint, integrated unloader, and direct F8 motor mount minimize system complexity and maximize available space
• Automated spray booths and rinse stations — installations requiring precise, repeatable pressure control from a compact, factory-calibrated assembly with consistent electric-motor-regulated output

5-Year US Warranty, Full Rebuildability, and Wholesale Pricing

RC Series Commercial Performance Backed by Domestic Support

The RCV3G27D-F8M2I is protected by Annovi Reverberi’s 5-year limited warranty through the US-based warranty and service network. Every internal wear component — solid ceramic plungers, forged brass manifold seals and o-rings, stainless valve seats and springs, Mini-Matic M2I unloader service parts, piston packing kits, and crankcase bearings — is stocked domestically through authorized distribution channels. Contractors, fleet operators, facility managers, OEM equipment builders, resellers, and volume buyers are invited to contact the WSHPWR wholesale team for pricing on the RCV3G27D-F8M2I and the complete Annovi Reverberi pump and unloader assembly line. WSHPWR maintains one of the most complete Annovi Reverberi inventories available through any US web store — with thousands of products in stock and a continually expanding catalog.

8,100 Cleaning Units. 2,700 PSI. 3.0 GPM. F8 NEMA 56C. M2I Thermal Relief. Two-Mode.

Italian Engineering. Compact Electric Platform. Factory-Approved Mini-Matic Assembly. US Warranty Coverage.

For detail shops, fleet operators, facility maintenance teams, OEM equipment builders, and commercial contractors who need 3.0 GPM at 2,700 PSI on a NEMA 56C electric motor platform — with F8 flange direct coupling for cabinet washers, skids, and compact systems, factory-matched Mini-Matic M2I integrated unloader with thermal relief bypass and downstream chemical injection, forged brass manifold and stainless valve construction, and a completely rebuildable platform backed by a 5-year US warranty — the RCV3G27D-F8M2I delivers a purpose-engineered compact commercial solution from one of the global pressure pump industry’s most trusted manufacturers. Eight thousand one hundred cleaning units. NEMA 56C direct couple. Two-mode chemical capability. Five years of US warranty. A decade of service life.

Volume buyers can reach the WSHPWR wholesale team directly at wholesale@wshpwr.com to discuss pricing for quantity purchases across the complete Annovi Reverberi lineup.