RCV2G22D-F7M2I Gas Triplex Pump | 2.0 GPM 2200 PSI

RCV2G22D-F7M2I by Annovi Reverberi — RC Series Triplex Plunger Pump with Mini-Matic M2I Unloader and Chemical Injector | 2.0 GPM | 2,200 PSI | Brass Manifold | 3/4″ Hollow Keyway Shaft | SAE J609a Gas Engine Drive

The RCV2G22D-F7M2I by Annovi Reverberi is a professional-grade RC Series triplex ceramic plunger pump engineered for compact gas engine-driven pressure washing systems requiring 2.0 GPM at 2,200 PSI with factory-integrated downstream chemical injection capability. Rated at 2.0 GPM and 2,200 PSI at 3,400 RPM, the RCV2G22D-F7M2I delivers 4,400 cleaning units — combining 2.0 GPM focused output with 2,200 PSI cleaning force for residential and commercial vehicle washing, patios, building exteriors, agricultural equipment, and industrial tool and machinery cleaning — through a precision-machined brass manifold, solid ceramic plungers, stainless steel valves, and an F7 SAE J609a direct-drive flange with 3/4″ hollow keyway shaft for direct coupling to compatible gasoline engines. As part of Annovi Reverberi’s pump and unloader assemblies stocked and supported by WSHPWR, the RCV2G22D-F7M2I arrives factory-configured and factory-tested, ready to deliver from the first startup.

The RCV2G22D-F7M2I carries the factory-installed Mini-Matic M2I integrated unloader and chemical injector — delivering factory pre-set and adjustable pressure regulation with downstream chemical injection from a single compact, factory-configured assembly. Its small footprint fits contractor carts, rental-yard frames, and OEM assemblies where space is limited, while the factory-matched M2I assembly simplifies replacement installs that must preserve original mount geometry and hose routing. Built by Annovi Reverberi in Modena, Italy — with US-based operations, a domestic parts distribution network, and dedicated technical support — the RCV2G22D-F7M2I arrives pre-filled with factory break-in oil, factory-tested, and ready for installation. Protected by a 5-year US limited warranty and built to be fully rebuilt rather than replaced, this pump is a long-term investment capable of a decade of productive service life.

Factory-Matched and Approved — The RCV2G22D-F7M2I Complete Assembly Advantage

No Mismatches. No Guesswork. No Warranty Risk. Just Install and Run.

Every RCV2G22D-F7M2I ships as a factory-matched, factory-approved, and factory-installed complete pump and unloader assembly:

• Factory-matched M2I for 2,200 PSI — the Mini-Matic M2I integrated unloader and chemical injector are factory-calibrated for this pump’s 2.0 GPM / 2,200 PSI duty point. Pressure regulation and chemical draw characteristics are factory-set as a complete system.
• Factory-approved configuration — the complete assembly is Annovi Reverberi’s validated specification for this model. Operating with the factory-installed components maintains full 5-year warranty coverage.
• Factory-installed and tested — every RCV2G22D-F7M2I exits the manufacturing facility with the M2I assembly mounted, calibrated, and tested for flow, pressure, and leak-free operation before shipment.
• Eliminates mismatch returns — the factory-matched assembly eliminates incorrect unloader or injector specification — the most common source of pump system returns — before the pump leaves the box.
• Stress-free installation — mount to the engine, connect system hoses, connect the detergent supply line to the injector port, add fuel, and start. The RCV2G22D-F7M2I arrives engineered, assembled, and ready.

Decoding the RCV2G22D-F7M2I Model Number

What Every Segment of This Annovi Reverberi Pump Designation Tells You

• RCV — Pump series: RC Series triplex plunger pump — Annovi Reverberi’s compact commercial gas engine pump platform
• 2G — Flow rate: 2.0 GPM
• 22 — Maximum pressure: 2,200 PSI — 2.0 × 2,200 = 4,400 cleaning units
• D — Shaft version: Direct Drive — 3,400 RPM operating speed for direct gas engine coupling per Annovi Reverberi model designation convention
• F7 — Flange type: SAE J609a direct-drive flange — close coupling to gas engines with a 3/4″ hollow keyway shaft (Annovi Reverberi part AR1579)
• M2 — Unloader family: Mini-Matic — factory-installed integrated unloader assembly with adjustable pressure regulation
• I — Chemical injector: Included — downstream soap injector factory-integrated into the Mini-Matic M2 assembly for two-mode wash capability

Key Specifications

RCV2G22D-F7M2I Technical Details at a Glance

• Flow Rate: 2.0 GPM (gallons per minute)
• Maximum Pressure: 2,200 PSI
• Cleaning Units: 4,400 (GPM × PSI)
• Operating Speed: 3,400 RPM
• Pump Type: RC Series triplex ceramic plunger pump — three-piston crankshaft-driven design for smooth, low-pulsation output
• Flange: F7 — SAE J609a direct-drive flange, 3/4″ hollow keyway shaft, gas engine compatible (Annovi Reverberi part AR1579)
• Manifold Material: Precision-machined brass — pressure stability and corrosion resistance
• Plungers: Solid ceramic — wear resistance and consistent sealing performance
• Valves: Stainless steel — durability under frequent pressure cycling
• Bearings: Industrial-grade — engineered for long-term tolerances under continuous operation
• Serviceability: Oil sight glass and vented dipstick for simplified routine maintenance
• Lubrication: Oil-bath crankcase with factory pre-filled break-in oil
• Unloader System: Mini-Matic M2I — factory pre-set and adjustable; integrated downstream chemical injector; factory-matched and factory-installed
• Connections: Banjo bolts and sealing O-rings — standard M2 family hardware supplied for secure, leak-resistant installation
• Chemical Injector: Included — downstream venturi injector factory-integrated into M2I Mini-Matic assembly
• Warranty: 5-year limited warranty — US-based coverage through Annovi Reverberi North America

What’s Included in the Box

A Complete, Factory-Configured RCV2G22D-F7M2I Assembly Ready for Installation

• Factory-matched Mini-Matic M2I integrated unloader with active chemical injector — factory pre-set and installed for the 2.0 GPM / 2,200 PSI operating point; adjustable; injector port ready for detergent supply line connection
• Banjo bolts and sealing O-rings — standard M2 family hardware for secure, leak-resistant unloader connections
• Factory break-in oil — crankcase pre-filled to the correct operating level for first startup
• Oil sight glass and vented dipstick — at-a-glance oil level monitoring and simplified oil changes
• Mounting hardware — for F7 SAE J609a direct-drive flange installation on compatible gas engines
• Operator’s manual — complete installation, startup, operating, and maintenance procedures including oil change intervals, chemical injector care, and winterization protocol
• Parts schematic — exploded-view diagram with Annovi Reverberi part numbers for every serviceable component

Mini-Matic M2I Unloader — Two-Mode Platform at 2,200 PSI

Factory Pre-Set. Adjustable. Integrated Chemical Feed. Compact Gas Engine Ready.

• Factory pre-set and adjustable pressure regulation — the Mini-Matic M2I on the RCV2G22D-F7M2I arrives calibrated for immediate 2,200 PSI operation with manual adjustment available for fine-tuning to match nozzle size, surface type, and cleaning requirements
• Integrated downstream injection — draws detergent or pre-soak solution when the operator switches to low-pressure application mode on the RCV2G22D-F7M2I. No separate injector hardware or additional plumbing required.
• Two-mode workflow at 2.0 GPM / 2,200 PSI — chemical pre-soak breaks down grease, film, and general soils; full 2,200 PSI / 2.0 GPM rinse removes loosened material at 4,400 cleaning units. Switch between modes without changing tools.
• Dependable pump protection in start/stop duty cycles — the Mini-Matic M2I supports pressure tuning and helps protect the RCV2G22D-F7M2I during trigger cycling on contractor, rental, and maintenance equipment
• Simplified replacement installs — integrated control components on the RCV2G22D-F7M2I reduce external plumbing complexity and maintain original mount geometry and hose routing on direct replacement installations
• Injector maintenance — flush the injector circuit with clean water after every detergent session and limit extended bypass operation to reduce heat buildup on the RCV2G22D-F7M2I

Typical Applications

Where the RCV2G22D-F7M2I Delivers Best Results

• Contractor and property-maintenance wash rigs — the RCV2G22D-F7M2I’s compact footprint, factory-matched M2I assembly, and broad engine compatibility make it a practical specification for contractor carts, rental-yard frames, and replacement installs
• Residential and commercial vehicle, patio, and building cleaning — 2,200 PSI output and integrated detergent injection handle surface contamination efficiently on portable gas engine-powered systems where compact size is a priority
• Agricultural equipment rinse-down and yard maintenance — tractors, implements, and farm equipment where the RCV2G22D-F7M2I’s two-mode capability handles chemical application and rinse on compact gas engine-powered portable rigs
• Industrial tool and machinery cleaning in shops and plants — the RCV2G22D-F7M2I’s compact direct-drive design delivers 2,200 PSI cleaning output with integrated chemical feed for prep work, degreasing, and general shop cleaning

For operators who prefer a fully configured direct-drive system rather than a bare pump assembly, WSHPWR also carries complete gas and diesel engine pump packages ready to mount on a frame or trailer.

5-Year US Warranty, Full Rebuildability, and Wholesale Pricing

RC Series Performance Backed by Domestic Support

The RCV2G22D-F7M2I is protected by Annovi Reverberi’s 5-year limited warranty through the US-based warranty and service network. Every internal wear component — solid ceramic plungers, brass manifold seals and o-rings, stainless valve seats and springs, Mini-Matic M2I unloader service parts, piston packing kits, and crankcase bearings — is stocked domestically through authorized distribution channels. Contractors, fleet operators, facility managers, OEM equipment builders, resellers, and volume buyers are invited to contact the WSHPWR wholesale team for pricing on the RCV2G22D-F7M2I and the complete Annovi Reverberi pump and unloader assembly line. WSHPWR maintains one of the most complete Annovi Reverberi inventories available through any US web store — with thousands of products in stock and a continually expanding catalog.

4,400 Cleaning Units. 2,200 PSI. 2.0 GPM. F7 SAE J609a. Mini-Matic M2I. Two-Mode.

Italian Engineering. Compact Gas Engine Platform. Factory-Approved Mini-Matic Assembly. US Warranty Coverage.

For residential users, commercial contractors, agricultural teams, and OEM equipment builders who need 2.0 GPM at 2,200 PSI on a compact gas engine platform — with F7 SAE J609a direct-drive flange for 3/4″ hollow keyway shaft engine coupling, factory-matched Mini-Matic M2I integrated unloader with downstream chemical injection for two-mode wash capability, and a completely rebuildable platform backed by a 5-year US warranty — the RCV2G22D-F7M2I delivers a purpose-engineered compact commercial solution from one of the global pressure pump industry’s most trusted manufacturers. Four thousand four hundred cleaning units. Direct gas engine drive. Two-mode chemical capability. Five years of US warranty. A decade of service life.

Volume buyers can reach the WSHPWR wholesale team directly at wholesale@wshpwr.com to discuss pricing for quantity purchases across the complete Annovi Reverberi lineup.