XMA2G22E Triplex Pump | 2.0 GPM 2200 PSI 1750 RPM

XMA2G22E Compact Triplex Plunger Pump

The Annovi Reverberi XMA2G22E is a compact triplex plunger pump designed for small
industrial, facilities, and light commercial cleaning systems where reliability,
controlled flow, and long service life matter more than peak output. Delivering
2.0 GPM at 2,200 PSI at a steady 1,750 RPM, it is well suited
for detail work, component cleaning, and low-flow wash stations that need consistent,
repeatable pressure without overloading electrical supply or drive components.

• 2.0 GPM at 2,200 PSI for controlled, precise cleaning tasks.
• 1,750 RPM slow-speed operation to limit heat, vibration, and wear.
• Compact package suitable for small skids, cabinets, and benchtop systems.
• Industrial-grade construction for long service life in daily use.
• Configured for users who value reliability and easy service access.

Performance & Duty Point

The XMA2G22E is targeted at applications where a modest, well-controlled flow is
preferred over high-volume output. Its duty point allows system designers to pair
the pump with smaller motors while still achieving effective working pressure for
fixtures, tooling, and targeted washdown stations. This makes it a practical choice
for precision cleaning cells, small equipment bays, and dedicated rinse stations.

• Flow: 2.0 GPM for focused cleaning and low water consumption.
• Pressure: 2,200 PSI for effective removal of typical soils and film.
• Speed: 1,750 RPM for balanced performance and low mechanical stress.
• Supports continuous-duty operation when installed with proper cooling and filtration.
• Well suited for single-gun or fixed-nozzle systems using smaller line sizes.

Key Specifications

The XMA2G22E integrates easily into small industrial or light commercial systems thanks
to its standardized shaft and familiar construction. Its Hollow keyway shaft gives
integrators flexibility when choosing coupling methods, while the internal geometry is
optimized for stable pressure and minimal pulsation at the rated flow.

• Shaft: 5/8 inch keyway crankshaft for secure drive connection.
• Pump Type: Triplex plunger design for smooth flow and reduced pulsation.
• Manifold: Corrosion-resistant brass for long-term dimensional stability.
• Plungers: Solid ceramic plungers for abrasion and heat resistance.
• Valves: Stainless steel valves for reliable sealing and long cycle life.

Pump Construction & Materials

The XMA2G22E uses a brass manifold mated to ceramic plungers and stainless steel valves
to deliver a durable wet end that stands up to routine industrial cleaners and rinse
water. This combination maintains sealing surfaces and port geometry over time, helping
the pump hold pressure and flow without frequent head or valve replacement.

• Brass manifold provides structural strength and corrosion resistance.
• Ceramic plungers maintain smooth sealing surfaces under repeated cycling.
• Stainless steel valves resist pitting and ensure consistent opening and closing.
• Compact casting design supports low internal dead volume and clean flow paths.
• Wet-end layout supports straightforward valve and seal replacement in the field.

Drive End & Lubrication

Internally, the pump uses an oil-bath crankcase to protect the crankshaft, connecting
rods, and bearings. The 1,750 RPM operating speed reduces dynamic loads on these
components, and the lubrication system ensures a continuous oil film on moving parts,
supporting longer intervals between overhauls when basic maintenance is followed.

• Oil-bath crankcase for continuous lubrication of drive components.
• Vented dipstick to support crankcase ventilation and convenient filling.
• Oil sight glass for quick level and condition checks during daily inspections.
• Precision-ground crankshaft and bearings sized for daily, recurring use.
• Housing and cover design aimed at stable, low-noise operation.

Operation & System Integration

The 24mm solid shaft allows the XMA2G22E to be driven by a variety of electric motors
using belt-drive or flexible coupling arrangements. Its compact form factor simplifies
mounting in small enclosures or integrated machinery, making it a good fit for OEM
equipment, test stands, and small washdown panels.

• Adaptable to single-phase or three-phase motor packages, depending on system design.
• Suitable for use with standard unloaders, regulators, and safety relief valves.
• Compact footprint simplifies layout in tight cabinets or on stacked frames.
• Can serve as a dedicated pump for specific tools, cells, or small cleaning zones.

Maintenance & Service Access

The XMA2G22E is configured so that routine checks and basic service can be handled
quickly by in-house staff. Visual oil inspection, simple drain and refill procedures,
and accessible valve caps reduce downtime and support planned maintenance schedules.

• Vented dipstick and drain arrangement for straightforward oil changes.
• Oil sight glass for daily level confirmation without removing covers.
• Accessible valve caps for inspection and replacement of valve assemblies.
• Standardized seal and valve kits available for predictable service intervals.
• Documentation and schematics typically supplied to assist with troubleshooting.

Applications

While compact, the XMA2G22E retains an industrial character and is suitable for
small-scale washdown tasks, equipment cleaning, and support work in maintenance
shops and light production environments. It provides enough pressure to handle
routine contamination without the complexity of a high-flow system.

• Equipment and component cleaning in maintenance and repair facilities.
• Small wash stations for carts, fixtures, and tooling.
• Detail rinsing and pre-cleaning before finishing or coating operations.
• Light-duty industrial washdown around machinery and work cells.
• Compact OEM systems where space and power are limited but reliability is critical.

Why Specify the XMA2G22E

The XMA2G22E offers a balanced blend of performance, durability, and simplicity for
small industrial and light commercial cleaning systems. Its triplex plunger design
provides smoother flow than basic axial pumps, while the robust 24mm crankshaft and
industrial wet-end materials help keep performance stable over time. For designers
and operators who need a compact, reliable pressure source rather than maximum flow,
this pump delivers practical capability with straightforward service requirements.

• 2.0 GPM at 2,200 PSI in a compact, slow-speed configuration.
• Triplex plunger architecture for smoother, more consistent output.
• Industrial materials and construction for extended service life.
• Service-friendly features that support in-house maintenance routines.
• Practical choice for WSHPWR.com customers building small, reliable pump systems.