XMASS1G15E-F33 | 1 GPM 1500 PSI Pump Stainless Head 56C Face

Annovi Reverberi XMASS1G15E-F33 Stainless Triplex Pump | 1.0 GPM 1500 PSI NEMA 56C F33 Viton

XMASS1G15E-F33 — the Annovi Reverberi AISI 316 stainless steel
compact triplex plunger pump delivering 1.0 GPM at 1,500 PSI at
1,750 RPM with a NEMA 56C F33 face mount and
5/8-inch hollow shaft for direct coupling to standard TEFC
4-pole electric motors — engineered for food and pharmaceutical equipment
cleaning, HVAC coil washing, biotech and laboratory sanitation, OEM enclosed
motor assemblies, and precision rinse applications where space-constrained
installations require AISI 316 stainless construction, Viton seal chemical
compatibility, and consistent one-gallon-per-minute controlled output. The
XMASS1G15E-F33 is purpose-built for OEM panels, enclosed
cabinet installations, and skid systems that must balance compact footprint,
corrosion resistance, and chemical compatibility in a direct 56C motor-coupled
package without adapters or alignment hardware.

The XMASS1G15E-F33 combines three specifications that
collectively define its application class: an AISI 316 stainless
manifold for chloride and caustic resistance, Viton seals
for aggressive detergent and sanitizer compatibility, and a NEMA 56C F33
direct-drive mount for compact space-saving integration. Together these
three features make the XMASS1G15E-F33 the correct specification for the
precision cleaning and targeted rinse applications in food, pharmaceutical,
biotech, and OEM equipment environments where standard brass manifold pumps
with standard seals cannot meet chemical compatibility or spatial
installation requirements. Every XMASS1G15E-F33 ships factory
performance-tested, pre-filled with break-in oil, and backed by a
5-year commercial warranty with U.S.-based service support.

XMASS1G15E-F33 Key Specifications

Performance, Drive & AISI 316 Stainless Construction

• Model: Annovi Reverberi XMASS1G15E-F33
• Flow Rate: 1.0 GPM — precise controlled output
  for targeted cleaning, CIP touch-up, HVAC coil washing,
  and OEM precision rinse applications where overspray
  must be minimized
• Maximum Pressure: 1,500 PSI — consistent
  high-pressure output for food equipment cleaning,
  pharmaceutical sanitation, electronics rinsing, and
  HVAC maintenance without surface
  risk on sensitive components
• Operating Speed: 1,750 RPM — standard 4-pole
  electric motor speed; direct coupling without additional
  speed reduction hardware on
  compatible TEFC motors
• Drive: NEMA 56C F33 face mount with 5/8-inch
  hollow shaft — direct coupling to common TEFC motors
  for precise alignment and compact integration without
  adapters in enclosed OEM
  assemblies
• Pump Type: Triplex plunger — smooth, repeatable
  low-pulsation output at rated 1,500 PSI for precision
  cleaning and rinse applications
• Manifold: AISI 316 stainless steel — corrosion
  and scaling resistance in detergent-rich, humid,
  and chemically aggressive
  environments
• Seals: Viton — durable compatibility with
  aggressive detergents, sanitizers, and many process
  chemicals encountered in food, pharmaceutical,
  and biotech applications
• Plungers: Ceramic — sealing integrity through
  thermal cycling and continuous duty at
  rated 1,500 PSI output
• Valves: Stainless steel — pressure stability
  and corrosion resistance in chemical
  washdown service
• Components: Anodized — additional corrosion
  protection on external components in
  humid and chemical environments
• Oil Management: Oil sight glass and vented
  dipstick for fast visual checks protecting bearings
  and seals in space-constrained
  OEM installations
• Chemical Compatibility Note: Always confirm
  detergent, sanitizer, and process chemical compatibility,
  concentration, and maximum allowable temperature for
  AISI 316 stainless and Viton components before
  commissioning the XMASS1G15E-F33
• Warranty: 5-year commercial warranty with
  U.S.-based service support

What’s Included with the XMASS1G15E-F33

Factory-Tested and Pre-Oiled for Immediate OEM and Field Installation

• Factory performance-tested pump assembly —
  flow and pressure verified to published specifications
  before every XMASS1G15E-F33 shipment
• Pre-filled break-in oil — factory-installed
  to speed commissioning in enclosed cabinet and
  OEM panel installations where access
  is limited
• Oil sight glass — quick visual crankcase oil
  level check before each operating session without
  tools or disassembly in space-constrained
  installations
• Vented dipstick — crankcase pressure balance
  and secondary oil level verification for routine
  preventive maintenance access
• 5-year commercial warranty documentation —
  with U.S.-based service center coverage

What Makes the XMASS1G15E-F33 Different

Three Specifications That Define the Application — AISI 316, Viton, and F33 Direct-Drive

The XMASS1G15E-F33 is defined by the combination of three
specifications that competitors in the compact electric pump class rarely
offer together in a single package.

The AISI 316 stainless manifold provides chloride attack
resistance and caustic agent durability beyond what Grade 304 stainless or
brass manifolds can offer — the correct specification for food processing
rinse chemistry, pharmaceutical sanitizer concentrations, and biotech
cleaning agents where manifold material selection directly determines
service life. AISI 316 maintains structural integrity and sealing geometry
through repeated hot water, steam, and harsh chemical exposure cycles that
degrade standard manifold materials.

The Viton seals extend chemical compatibility beyond what
standard EPDM or Buna-N seals can handle in aggressive detergent and sanitizer
environments — Viton’s broad chemical resistance covers the concentrated
cleaning agents used in food equipment CIP touch-up, pharmaceutical sanitation,
and biotech laboratory applications where seal failure from chemical incompatibility
is a primary maintenance concern.

The NEMA 56C F33 direct-drive mount with 5/8-inch hollow shaft
eliminates the belts, pulleys, and alignment procedures that add complexity and
space requirements to compact OEM installations — the XMASS1G15E-F33 couples
directly to standard TEFC 4-pole motors at 1,750 RPM without adapters, keeping
the combined motor-pump assembly compact enough for enclosed cabinet mounting,
wall panel integration, and tight-space OEM skid configurations.

XMASS1G15E-F33 Recommended Applications

Precision Chemical-Resistant Output Where Standard Pumps Cannot Be Specified

• Food and pharmaceutical equipment cleaning:
  small-area washdown, post-CIP rinse touch-up, and
  equipment surface sanitation where AISI 316 stainless
  and Viton seals meet the chemical compatibility
  requirements — confirm detergent concentration
  and temperature compliance with facility
  validation protocols
• HVAC coil washing and maintenance: controlled
  1.0 GPM flow for targeted coil rinsing where overspray
  must be minimized around electrical components and
  the XMASS1G15E-F33’s compact F33 mount fits
  in service panel and rooftop
  unit configurations
• Compact ultrasonic and parts washers:
  precise 1,500 PSI high-pressure feed for parts cleaning
  systems where consistent 1.0 GPM controlled output
  and chemical-resistant construction are both
  required specifications
• Biotech and laboratory sanitation: enclosed
  panels and bench-mounted systems requiring AISI 316
  stainless and Viton chemical resistance in controlled
  laboratory environments — confirm compatibility
  with all process chemicals before
  commissioning
• Electronics and battery service rinsing:
  terminal and equipment rinse applications where
  1.0 GPM controlled output minimizes overspray on
  adjacent sensitive components and the AISI 316
  manifold handles contact with
  electronics cleaning agents
• OEM skids and enclosed motor assemblies:
  tight-space integrations where the XMASS1G15E-F33’s
  F33 56C direct coupling, compact footprint, and
  AISI 316 stainless construction deliver compliance-ready
  performance in space-constrained
  OEM equipment builds

XMASS1G15E-F33 Integration and Maintenance

Best Practices for Compact Stainless Viton Electric Pump Systems

• Protect the inlet with fine filtration:
  at 1.0 GPM flow demand, fine oversized filtration
  and short unrestricted suction lines are critical —
  cavitation risk at low flow damages the XMASS1G15E-F33’s
  ceramic plungers and Viton seals rapidly if inlet
  conditions are inadequate
• Match nozzle precisely to target GPM and PSI:
  size the nozzle orifice for 1.0 GPM at 1,500 PSI and
  install a pressure gauge at the tool — incorrect nozzle
  sizing creates pressure hunting and output
  inconsistency in precision
  rinse applications
• Size unloader correctly and limit bypass cycles:
  rate the unloader for 1,500 PSI and 1.0 GPM — avoid
  extended bypass periods to control heat rise; add thermal
  relief protection appropriate for the installation’s
  bypass cycle frequency
• Prime before every start: flow clean water
  through the XMASS1G15E-F33 before each operating
  session — dry running at 1,500 PSI damages Viton
  seals and ceramic plunger packings immediately
  and voids warranty coverage
• Verify NEMA 56C motor coupling alignment:
  ensure accurate F33 56C motor coupling and rigid mounting
  to protect the 5/8-inch hollow shaft bearings —
  misalignment in compact OEM installations is
  a primary cause of premature
  bearing failure
• Flush with clean water after every chemical
  application: run clean water through the
  XMASS1G15E-F33 after each chemical service cycle —
  even Viton seals benefit from chemical residue
  clearance between operating sessions
• Monitor oil via sight glass and change on schedule:
  the compact installation makes daily sight glass
  verification essential — oil condition is the primary
  indicator of bearing health in space-constrained
  XMASS1G15E-F33 installations
• Confirm all chemical compatibility before
  commissioning: verify detergent, sanitizer,
  and process chemical compatibility with both AISI 316
  stainless and Viton components at actual concentration
  and temperature before first
  operation

Why Choose the Annovi Reverberi XMASS1G15E-F33

AISI 316, Viton, and F33 Direct-Drive in One Compact Compliance-Ready Package

• The only specification that covers all three
  requirements together: AISI 316 stainless
  manifold, Viton seals, and F33 NEMA 56C direct-drive
  in a single compact triplex package — competitors
  in this output class rarely offer all three in
  a product that fits enclosed
  OEM cabinet installations
• Viton seals for the chemistry standard pumps
  cannot handle: the seal specification for
  concentrated sanitizers, aggressive detergents, and
  process chemicals in food, pharmaceutical, and
  biotech applications where EPDM and Buna-N
  seals fail from chemical
  incompatibility
• AISI 316 above Grade 304 and brass:
  chloride attack resistance and caustic durability
  that Grade 304 stainless and brass manifolds cannot
  provide in the chemical environments where
  the XMASS1G15E-F33 is specified
• F33 direct-drive eliminates alignment complexity
  in compact spaces: no belts, no pulleys, no
  adapter plates — the XMASS1G15E-F33 couples directly
  to standard TEFC 4-pole motors at 1,750 RPM for
  the cleanest possible OEM
  panel integration
• Factory-tested precision output: 1.0 GPM
  at 1,500 PSI verified before shipment — critical
  for OEM system builders where pump output
  consistency is a documented
  performance requirement
• Annovi Reverberi stainless pump engineering since
  1958: over 60 years of industrial pump
  manufacturing expertise including AISI 316 stainless
  and Viton seal configurations for food, pharmaceutical,
  and chemical industrial applications
• 5-year warranty on AISI 316 stainless Viton
  construction: exceptional coverage for a
  precision compliance-ready pump — backed by U.S.-based
  service support
• Backed by WSHPWR: expert application support,
  chemical compatibility guidance, motor compatibility
  confirmation, and full parts availability for the
  XMASS1G15E-F33 and the complete Annovi Reverberi
  XMA stainless pump family

The XMASS1G15E-F33 delivers 1.0 GPM at 1,500 PSI
at 1,750 RPM through a NEMA 56C F33 5/8-inch hollow shaft
direct-drive mount built on an AISI 316 stainless manifold with
Viton seals — the compact precision stainless triplex pump engineered for
food equipment cleaning, pharmaceutical sanitation, biotech laboratory systems,
HVAC coil washing, and OEM enclosed assemblies where AISI 316 chemical resistance,
Viton seal compatibility, and direct 56C motor coupling in a space-constrained
package are all required. Contact WSHPWR for current pricing, availability,
chemical compatibility guidance, and motor compatibility confirmation.