RTP30N | 7.9 GPM 7250 PSI Pump 1000 RPM 35mm Industrial

RTP30N Ultra High-Pressure Industrial Triplex Pump

The Annovi Reverberi RTP30N is an ultra high-pressure industrial triplex pump
engineered for continuous-duty service in demanding plants, mills, and process
facilities. Delivering 7.9 GPM at 7,250 PSI at a controlled
1,000 RPM, it pairs substantial flow with extreme pressure for
applications where cleaning, cutting, or decontamination tasks leave no margin
for equipment downtime.

• 7.9 GPM at 7,250 PSI for heavy industrial and process cleaning tasks.
• Slow-speed 1,000 RPM operation for reduced wear and longer service life.
• 35mm solid keyed shaft designed for heavy-duty power transmission.
• Triplex plunger architecture for stable, repeatable high-pressure output.
• Built for continuous-duty operation in harsh, high-demand environments.

High-Pressure Performance & Duty Point

The RTP30N is specified for work where typical pressure washer outputs are not
sufficient. Its high-pressure duty point allows operators to remove heavy scale,
baked-on residues, and process deposits, while maintaining a controlled 7.9 GPM
flow rate that supports precise tooling, lance work, and multi-pass cleaning
strategies commonly used in industrial maintenance programs.

• Pressure rating: 7,250 PSI for severe industrial contamination.
• Flow rate: 7.9 GPM for effective flushing and debris removal.
• Speed: 1,000 RPM for stable hydraulic performance and low shock.
• Capable of supporting single- and multi-gun high-pressure systems.
• Duty range aligned with hydrostatic testing, decontamination, and mill service.

Triplex Plunger Hydraulic Design

At the core of the RTP30N is a triplex plunger configuration that generates
extremely high pressure with controlled pulsation. Three hardened stainless
plungers operate in sequence against high-pressure seals and a precision valve
train, delivering consistent discharge pressure to lances, rotary tools, and
automated cleaning heads.

• Triplex layout for smooth, repeatable high-pressure output.
• Hardened stainless steel plungers for maximum strength and wear resistance.
• High-pressure seal assemblies designed for ultra-high PSI duty.
• Valve train optimized for rapid cycling and secure seating under load.
• Hydraulic design aimed at minimizing pulsation and protecting downstream tools.

Slow-Speed Drive & Mechanical Architecture

The RTP30N is built around a slow-speed mechanical package tailored for continuous
service. Running at 1,000 RPM reduces dynamic stress on bearings, rods, and
seals compared to faster designs, while the 35mm solid keyed shaft
provides a robust interface to gearboxes, engines, or electric motors in
industrial drive trains.

• 1,000 RPM operating speed to lower vibration, heat, and mechanical fatigue.
• 35mm solid keyed shaft for high-torque drive configurations.
• Oversized bearings sized for continuous-duty radial and thrust loading.
• Bronze connecting rods for strength, alignment, and thermal stability.
• Reinforced frame and crankcase designed for rigid mounting and minimal deflection.

Crankcase, Lubrication & Monitoring

The drive end is supported by a heavy-duty crankcase with full oil-bath
lubrication to protect the crankshaft and bearing sets under sustained load.
Factory pre-fill with break-in oil, an integrated sight glass, and a vented
dipstick provide operators with straightforward tools to manage lubrication
during service.

• Oil bath lubrication to maintain a continuous protective film on moving parts.
• Pre-filled with break-in oil for controlled startup and commissioning.
• Oil sight glass for quick visual verification of level and condition.
• Vented dipstick to balance crankcase pressure and simplify servicing.
• Crankcase layout intended for long intervals between major overhauls.

Maintenance, Serviceability & Quality Assurance

The RTP30N is designed to be maintained in place by plant maintenance teams or
service contractors. Valve assemblies, seals, and plungers are accessible for
replacement, and every pump is subjected to factory performance testing at rated
pressure and flow before shipment to confirm operating integrity.

• Factory-tested at 7,250 PSI and rated flow; test data supplied with each unit.
• Serviceable wet end with replaceable seals, valves, and plungers.
• User manual and schematic diagrams included for installation and overhaul.
• Maintenance-friendly monitoring via sight glass and vented dipstick.
• Backed by a 5-year commercial-use warranty with U.S.-based service support.

Operational Reliability & Lifecycle

Component selection and slow-speed operation are coordinated to maximize
operating hours between major service events. The combination of hardened
plungers, bronze rods, reinforced seals, and oversized bearings positions the
RTP30N as a long-term asset in facilities where access is restricted and
unplanned downtime is costly.

• Continuous-duty capability for multi-shift industrial environments.
• High-strength materials to tolerate cyclical loading and pressure spikes.
• Seal and bearing package configured for extended service intervals.
• Consistent performance profile across long operating campaigns.
• Warranty and support structure aligned with industrial lifecycle expectations.

Industrial Applications & Use Cases

With its extreme pressure rating and controlled flow, the RTP30N is suited to
heavy industrial, energy, and process applications where aggressive cleaning and
precision high-pressure work are routine. It integrates into fixed systems,
skid packages, and engineered tool sets used throughout plant and field
operations.

• Manufacturing plant cleaning of machinery, floors, and production lines.
• Steel mill washdown and descaling of equipment and structures.
• High-pressure decontamination in controlled industrial or remediation facilities.
• Pipeline cleaning and hydrostatic testing for oil, gas, and utility sectors.
• Power plant maintenance for boilers, tanks, condensers, and turbine components.
• Marine and offshore applications where high-pressure, corrosion-resistant service is required.

Why Specify the RTP30N

The Annovi Reverberi RTP30N is a purpose-built high-pressure pump for operators
who need both capability and endurance. Its combination of 7.9 GPM at 7,250 PSI,
slow-speed drive, reinforced internals, and service-focused design makes it a
dependable core component in critical cleaning, decontamination, and maintenance
systems across industrial markets.

• Delivers extreme pressure with controlled flow for demanding industrial tasks.
• Slow-speed mechanical design aimed at long service life and reduced downtime.
• Heavy-duty construction using stainless plungers, bronze rods, and oversized bearings.
• Maintenance and monitoring features that support plant-level service programs.
• Supported by factory testing, documentation, and a 5-year commercial-use warranty.