RTD100-200SX | 26.4 GPM 2900 PSI Pump 1000 RPM 35mm Left-Hand

RTD100-200SX — Annovi Reverberi Industrial Plunger Pump (Left-Hand Shaft)

The RTD100-200SX is a heavy-duty, left-shaft configuration of the RTD100-200 series engineered for continuous-duty industrial cleaning systems. Rated at 26.4 GPM and 2,900 PSI at 1,000 RPM, the SX model features a 35mm left-hand solid shaft for reverse-drive or mirrored installations in custom skids, trailer rigs, and dual-pump systems.

Key Specifications

• Flow Rate: 26.4 GPM
• Pressure Rating: 2,900 PSI
• Speed: 1,000 RPM (slow-speed for longevity)
• Shaft Type: 35mm left-hand solid keyed shaft
• Head / Manifold: Forged brass
• Valves: Stainless-steel inlet & discharge valves
• Plungers: Ceramic plungers for wear and thermal resistance
• Rods & Bearings: Oversized bronze connecting rods with reinforced bearings
• Maintenance Features: Oil sight glass, vented dipstick, pre-filled break-in oil
• Warranty: 5-year commercial-use warranty (U.S.-based support)

What’s Included

• Factory pre-filled break-in oil
• Oil sight glass and vented dipstick
• Factory test report and performance verification
• User manual and exploded schematic
• 5-year commercial warranty with U.S. parts/support

Design & Materials

Rugged Industrial Construction

• Forged brass manifold for strength and corrosion resistance
• Ceramic plungers to resist wear, heat and chemical exposure
• Stainless-steel valves for reliable sealing under heavy duty
• Bronze connecting rods and oversized bearings for continuous operation
• 35mm left-hand shaft for reverse-drive/mirrored mounting

How It Works

• Triplex plunger arrangement provides steady, low-pulsation flow.
• Slow 1,000 RPM operation reduces heat, vibration, and component stress.
• When the spray gun is released, the matched unloader/regulator (if fitted) or bypass plumbing protects the pump from overpressure and heat buildup.

Benefits

• Reverse-drive compatibility: left-hand 35mm shaft enables mirrored and dual-pump layouts.
• High-volume cleaning: 26.4 GPM supports large-scale washdown and rapid rinsing.
• Continuous-duty reliability: slow-speed design and heavy-duty internals extend service life.
• Thermal & chemical resilience: ceramic plungers and stainless valves handle elevated inlet temperatures and aggressive detergents.
• Easy maintenance: sight glass and vented dipstick simplify checks and servicing.

Typical Applications

• Custom skid and trailer systems requiring mirrored pump orientation
• Municipal sanitation fleets and depot wash stations
• Mining and heavy equipment washdown
• Waste management and transfer station cleaning
• Industrial plant and tank-farm washdown
• Food & beverage processing areas requiring heavy-duty wash cycles

Installation & Integration

• Mount with the left-hand 35mm keyed shaft to suit reverse-drive couplings or belt/pulley drives.
• Use properly rated thermal relief and bypass plumbing for continuous-duty applications.
• Provide adequate inlet supply and filtration to prevent cavitation and prolong seal life.
• Follow factory torque and alignment specs when coupling to drives or motors.

Service & Reliability

• Factory-tested and shipped with break-in oil for immediate commissioning.
• Routine inspection points: inlet screens, valve condition, plunger wear, oil level/quality.
• Rebuild kits, replacement valves, and parts are available through AR North America service network.

RTD100-200SX | 26.4 GPM 2900 PSI Pump 1000 RPM 35mm Left-Hand

The RTD100-200SX is a specialty, industrial-grade plunger pump for operators who need reverse-drive flexibility and high-volume washdown capability. With 26.4 GPM at 2,900 PSI, a 35mm left-hand shaft, and heavy-duty internals, it’s engineered for continuous-duty, custom-skid, and mirrored installations where durability and uptime are critical.