RKASS36G12E-F17 | 3.6 GPM 1200 PSI Triplex Pump, 1750 RPM, SS 182/184C

RKASS36G12E-F17 — 3.6 GPM 1200 PSI Stainless Steel Triplex Pump, 1750 RPM, F17 Motor Flange

• Stainless steel industrial triplex plunger pump engineered for electric-driven washdown and sanitation systems that demand reliable daily operation and easy integration with existing plant infrastructure.
• Delivers 3.6 GPM at 1200 PSI while running at 1750 RPM, providing controlled cleaning power suitable for food plants, beverage facilities, pharmaceutical production, and general industrial wash stations.
• E-series F17 motor flange couples directly to NEMA 182–184C frame motors with a 1-1/8″ keyed shaft, forming a compact pump-and-motor assembly that reduces alignment work and simplifies installation.
• Stainless head, stainless valves, ceramic plungers, and oversized bearings are specified for long service life in chemically aggressive, high-moisture, and high-frequency washdown environments.

Performance and Operating Profile

• Rated at 3.6 GPM and 1200 PSI, the RKASS36G12E-F17 pump provides a practical balance of flow and pressure for routine sanitation, light degreasing, and rinse-down work on equipment, walls, and floors.
• Operating at 1750 RPM aligns with standard 4-pole industrial motors, allowing straightforward motor selection and predictable performance in centralized wash systems and standalone skids.
• Triplex plunger design produces low-pulsation output, improving spray pattern stability, gun control, and accessory life compared to higher-pulsation alternatives.
• The duty range is well suited to single-gun stations or small manifolds in plants where washdown tasks are carried out daily on multiple shifts.

RKASS36G12E-F17 Flow, Pressure, and Duty Range

• 3.6 GPM provides enough volume for effective rinsing of chemicals, foam, and residues while keeping water consumption and drainage requirements within typical facility limits.
• 1200 PSI offers sufficient impact for cleaning common food, beverage, and industrial soils without being excessively aggressive on coated surfaces and delicate equipment when paired with appropriate nozzles.
• When matched with a correctly sized unloader and nozzle orifice, the RKASS36G12E-F17 pump maintains stable working pressure over extended duty cycles with minimal need for operator adjustment.
• Designed for continuous or frequent-duty service when supplied with adequate inlet flow, proper filtration, and adherence to the manufacturer’s temperature and chemical guidelines.

F17 Motor Flange Integration for RKASS36G12E-F17

• E-series F17 flange is designed to bolt directly to NEMA 182–184C motors using a 1-1/8″ keyed shaft, ensuring a rigid and repeatable interface between motor and pump.
• Direct mounting eliminates separate base-plate alignment work and reduces the risk of misalignment that can shorten bearing and seal life.
• Compact pump-and-motor assembly fits on wall brackets, floor stands, mobile carts, or skid frames commonly used in mechanical rooms and utility corridors.
• The direct-drive configuration of RKASS36G12E-F17 removes belts and pulleys, simplifying guarding, reducing mechanical maintenance, and improving overall system reliability.

System Layout and Controls

• Compatible with across-the-line starters, soft starters, or variable-frequency drives, giving facility engineers flexibility in controlling starting current, ramp times, and operating speed if needed.
• Motor horsepower selection, overload sizing, and circuit protection should be coordinated with the pump’s flow and pressure settings to keep electrical and hydraulic loads in balance.
• The compact assembly simplifies routing of suction plumbing, discharge lines, hose reels, and chemical injection systems around a single, centralized power module.
• When installed with properly sized unloaders, safety relief valves, and bypass-to-tank plumbing, the system can operate safely in continuous or frequent-start applications.

Construction and Wet-End Design

• Stainless steel head RKASS36G12E-F17 provides enhanced resistance to detergents, sanitizers, and process chemicals commonly used in food, beverage, and sanitation applications.
• Stainless steel valves maintain accurate seating and consistent flow characteristics under frequent cycling and varying pressure conditions.
• Solid ceramic plungers present a hard, dimensionally stable surface to the packing sets, reducing wear and limiting heat transfer into the seal area during extended operation.
• Oversized crankshaft bearings and a robust connecting rod assembly are configured to carry the radial and axial loads associated with 1750 RPM continuous-duty service.

Seals, Bearings, and Serviceability of RKASS36G12E-F17

• High-pressure packing sets are specified for 1200 PSI service with clean water and compatible cleaning chemicals used within recommended temperature and concentration limits.
• Seal and valve kits are available so maintenance teams can rebuild the wet end on a scheduled basis, extending the usable life of the pump body and drive components.
• Head and valve arrangement allows straightforward access to core wear parts with common shop tools, supporting planned rebuilds during routine plant maintenance windows.
• Proper inlet filtration, correct suction hose sizing, and controlled chemical introduction further extend seal and valve life and help prevent cavitation-related damage.

Maintenance, Inspection, and Reliability of RKASS36G12E-F17

• The crankcase is shipped with factory break-in oil, simplifying initial start-up and protecting internal components through the early operating hours.
• An integrated oil sight glass provides quick visual confirmation of oil level and basic condition as part of pre-shift inspection routines.
• The vented dipstick regulates crankcase pressure and offers a controlled access point for draining and refilling oil at defined service intervals.
• When the pump is operated within specified limits for inlet conditions, temperature, lubrication, and speed, it is designed to deliver long, predictable service life in demanding washdown environments.

Preventive Maintenance Practices

• Recommended routines include checking oil level and clarity, inspecting fittings and head surfaces for seepage, and confirming stable system pressure and noise levels under normal operation.
• Seal and valve replacement intervals can be based on run hours, water quality, chemical exposure, and operating temperature, allowing rebuilds to be coordinated with broader facility maintenance plans.
• Regular cleaning of inlet strainers, inspection of suction lines, and functional checks of unloaders and relief valves help prevent cavitation, overpressure events, and premature component wear.
• Documented service history and adherence to manufacturer procedures support multiple rebuild cycles, improving lifecycle cost and overall system reliability.

Applications and Use Cases for RKASS36G12E-F17

• Food processing and USDA-style washdown systems where stainless wet-end construction and electric drive support hygiene and ventilation requirements.
• Dairy, beverage, and bottling facilities requiring daily sanitation of fillers, conveyors, tanks, loading docks, and packaging lines.
• Pharmaceutical and high-sanitation environments that need corrosion-resistant pumps with predictable, moderate-pressure output.
• Centralized electric wash stations feeding hose drops around production lines, coolers, and maintenance areas.
• Portable electric washdown carts and compact skids used in warehouses, distribution centers, and cold storage facilities.
• OEM-built sanitation modules, cabinet washers, and indoor wash systems requiring a stainless triplex pump in a 3.6 GPM, 1200 PSI, 1750 RPM F17 motor-flange configuration.