RSV3G35D-PKG | 3.0 GPM 3500 PSI Pump Pkg

RSV3G35D-PKG by Annovi Reverberi — Complete RSV Series Axial Radial Pump Package | 3.0 GPM | 3,500 PSI | Brass Head | Bronze Connecting Rods | F40 1″ Shaft | Fixed 12% Injector | Thermal Relief | Vented Dipstick | 10,500.0 Cleaning Units

The RSV3G35D-PKG by Annovi Reverberi is a complete, installation-ready RSV Series axial radial pump package engineered for direct drive gas engine-powered pressure washing systems requiring 3.0 GPM at 3,500 PSI with a brass head, bronze connecting rods, and all standard package contents in one organized, factory-assembled box. Rated at 3.0 GPM and 3,500 PSI, the RSV3G35D-PKG delivers 10,500.0 cleaning units — through a brass manifold head, ceramic pistons, bronze connecting rods, a fixed 12% chemical injector, thermal relief protection, a vented dipstick, and a 1″ hollow F40 shaft for direct coupling to compatible gas engines — all in one factory-assembled box with 16 oz of pre-filled crankcase oil. The F40 flange accepts the SAE J609a 1″ keyway shaft of Honda GX390, Predator 420cc, 459cc, and 670cc V-Twin platforms — the most capable engine family for sustained contractor-grade pressure washing output. As part of Annovi Reverberi’s pump package lineup stocked and supported by WSHPWR, the RSV3G35D-PKG is the complete contractor solution delivering 10,500.0 cleaning units from a brass-head, bronze-rod direct-drive axial platform. Backed by AR North America’s nationwide service network. Protected by a 2-year US limited warranty. Fully rebuildable.

Everything in One Box — The RSV3G35D-PKG Complete Package Contents

Brass Head. Bronze Rods. 3,500 PSI. F40 1″ Shaft. Factory-Assembled.

• RSV3G35D axial radial pump with brass head and bronze connecting rods — factory-assembled and pre-filled with 16 oz of crankcase oil. Brass manifold head engineered for 3,500 PSI contractor performance. Ceramic pistons, bronze connecting rods for sustained high-pressure duty. Vented dipstick for at-a-glance oil level monitoring. 1″ hollow F40 shaft for direct gas engine coupling at 3,400 RPM. 14 lbs.
• Fixed 12% chemical injector — integrated into the pump assembly. Connect the chemical tube and insert the chemical filter — the system draws detergent automatically at the correct 12% draw rate. No separate injector to source or install.
• Chemical tube and chemical filter — complete downstream detergent delivery assembly. Flush with clean water after every chemical use.
• Easy-grip swivel type garden hose adapter — swivel design allows the supply hose to rotate freely at the inlet without twisting the connection. Fast, tool-free hookup to standard garden hose supply lines.
• Stainless steel filter screen — protects the brass head, ceramic pistons, and integrated injector from supply water sediment and particulate.
• Thermal relief valve (TRV) — auto-activates during extended bypass when water temperature rises to the activation threshold. Vents hot water and draws cooler supply water. Auto-resets when temperature normalizes. No manual reset required.
• Vented dipstick — allows the crankcase to breathe during operation while providing a quick oil level check at every service interval.
• Pre-filled oil — 16 oz capacity — crankcase pre-filled before shipment. Ready to mount and run at first startup.
• Hex fasteners with locking washers — vibration-resistant engine-to-pump mounting hardware for secure installation on contractor frames.
• Operations manual with parts schematic — complete installation, operating, maintenance, and rebuild procedures. Every AR North America part number for every serviceable component in the RSV3G35D-PKG. Nationwide AR North America service center support.

Decoding the RSV3G35D-PKG

What This Annovi Reverberi Designation Tells You

• RSV — Pump series: RSV Series axial radial pump — Annovi Reverberi’s contractor-grade direct-drive platform with brass head, bronze connecting rods, TRV, and vented dipstick as standard features
• 3G (or 3.G) — 3.0 GPM flow rate identifier
• 35 — Maximum pressure: 3,500 PSI — 3.0 × 3,500 = 10,500.0 cleaning units
• PKG — Complete package: RSV pump with brass head and bronze rods, 12% injector, chemical tube and filter, swivel GHA, stainless filter screen, TRV, vented dipstick, 16 oz pre-filled oil, hex locking fasteners, and operations manual with parts schematic
• F40 — Flange: 1″ hollow keyway shaft / SAE J609a — compatible with Honda GX390, Predator 420cc/459cc/670cc V-Twin, Briggs & Stratton XR2100, and Kohler CH440 gas engines

Key Specifications

RSV3G35D-PKG Technical Details at a Glance

• Flow Rate: 3.0 GPM
• Maximum Pressure: 3,500 PSI (241 bar)
• Cleaning Units: 10,500.0 (GPM × PSI)
• Operating Speed: 3,400 RPM — direct drive gas engine
• Power Required: 7.5 EBHP minimum
• Pump Type: RSV Series axial radial — contractor-grade platform, fully rebuildable
• Head Material: Brass — contractor-grade specification at 3,500 PSI
• Pistons: Ceramic
• Connecting Rods: Bronze — sustained high-pressure contractor duty specification
• Bore Diameter: 15mm / Stroke: 7.6mm
• Shaft: D — 1″ hollow keyway, F40 SAE J609a flange, direct drive gas engine
• Inlet: 3/8″ F
• Outlet: 3/8″ M
• Max Temperature: 140°F
• Oil Capacity: 16 oz — pre-filled at factory
• Oil Monitoring: Vented dipstick
• Weight: 14 lbs
• Easy Start: Not included on this model — standard direct drive configuration
• Thermal Relief Valve: TRV — included; auto-activates and auto-resets
• Chemical Injector: Fixed 12% — integrated
• Inlet Adapter: Easy-grip swivel type garden hose adapter
• Filtration: Stainless steel filter screen
• Fasteners: Hex with locking washers
• Serviceability: Fully rebuildable — all components nationally available through AR North America
• Warranty: 2-year limited warranty — US-based coverage through Annovi Reverberi North America

Engine Compatibility — What Drives the RSV3G35D-PKG

F40 SAE J609a. 1″ Hollow Keyway Shaft. 7.5 EBHP Minimum. Predator and Honda Compatible.

The RSV3G35D-PKG requires a minimum of 7.5 engine brake horsepower to deliver full rated output at 3.0 GPM / 3,500 PSI. The F40 SAE J609a 1″ hollow keyway shaft is the standard interface for the full range of contractor-grade small and mid-frame gasoline engines. Confirmed compatible platforms include:

• Harbor Freight Predator 459cc / 15.8 HP Max Performance — the preferred Predator pairing for the RSV3G35D-PKG. Up to 10% more torque than the standard 420cc — the best single-cylinder power overhead for sustained 3.0 GPM / 3,500 PSI operation. 1″ SAE J609a keyway shaft. Direct replacement for Honda GX390, Briggs & Stratton XR2100, and Kohler CH440.
• Harbor Freight Predator 420cc / 13 HP — compatible with the RSV3G35D-PKG F40 1″ keyway shaft. Direct replacement for Honda GX390, Briggs & Stratton XR2100, and Kohler CH440.
• Harbor Freight Predator 670cc / 22 HP V-Twin — for operators requiring maximum engine overhead on sustained contractor duty cycles at 3,500 PSI. 1″ SAE J609a keyway shaft.
• Honda GX390 — 389cc, 1″ SAE J609a keyway shaft. Direct-mount compatible with the RSV3G35D-PKG F40 flange.
• Briggs & Stratton XR2100 / Vanguard series — 1″ SAE keyway. Direct-mount compatible.
• Kohler CH440 / Command series — 1″ SAE keyway. Direct-mount compatible.

RSV-40 Series — Brass Head, Bronze Rods, and 1″ Shaft at Contractor Output Levels

Brass Head. Bronze Connecting Rods. F40 1″ Shaft. Vented Dipstick. Fully Rebuildable.

• Brass head — contractor-grade specification — the RSV-40 Series ships with a brass manifold head on every model. At 3,500 PSI, the pressure cycling loads and thermal stresses require brass. The material decision is matched to the duty point — every time.
• Bronze connecting rods — sustained high-pressure duty specification — at the output levels of the RSV-40 platform, bronze connecting rods provide the wear resistance and thermal stability for sustained daily contractor cleaning programs. The correct specification upgrade from aluminum rods for this pressure and flow range.
• F40 1″ shaft — the contractor engine family — the F40 SAE J609a 1″ hollow keyway shaft accepts the full range of contractor-grade gas engines from 13 HP single-cylinder to 22 HP V-Twin platforms. The same shaft interface found across the professional triplex pump lineup — giving RSV-40 operators access to the complete range of contractor-proven engine pairings.
• Vented dipstick — 16 oz crankcase — the larger 16 oz oil capacity on the RSV-40 platform supports better thermal management and more consistent lubrication film strength across extended contractor duty cycles compared to smaller-capacity axial pump crankcases.
• Fully rebuildable — every wear component in the RSV3G35D-PKG is individually available through AR North America’s nationwide distribution network. Rebuild it when the time comes. Keep running.
• Get the most from 10,500.0 cleaning units — nozzle selection drives cleaning effectiveness at every pressure and flow level. Explore WSHPWR’s complete selection of spray nozzles and rotating heads to maximize what the RSV3G35D-PKG delivers on every surface and every job.

Typical Applications

Where the RSV3G35D-PKG Delivers Best Results

• Contractor pressure washing — surface prep, concrete restoration, equipment washdown — the RSV3G35D-PKG’s brass head, bronze rods, and F40 1″ shaft deliver contractor-grade axial platform performance at 3,500 PSI for operators who demand more than residential-spec components on professional job sites
• OEM equipment builds requiring contractor-grade axial output — the RSV3G35D-PKG’s boxed package format and F40 1″ shaft standardize builds for OEM builders and service companies, reducing sourcing errors and ensuring compatibility across production runs
• Fleet wash systems and facility cleaning — 3.0 GPM at 3,500 PSI with integrated chemical delivery for fleet wash bays and facility cleaning programs requiring consistent output and AR North America parts availability nationwide
• Agricultural operations — equipment, barns, and facility washdown — brass head durability, bronze connecting rods, stainless filter screen, and TRV thermal protection for demanding agricultural cleaning programs driven by contractor-grade gas engines
• Maximize results with the right nozzle — at 3.0 GPM and 3,500 PSI, nozzle selection is the difference between good cleaning and great cleaning. Explore WSHPWR’s spray nozzles and rotating heads lineup to match angle and orifice to every application.

2-Year US Warranty, Nationwide Service Centers, and Wholesale Pricing

Contractor Grade. Brass Head. Bronze Rods. Backed Across North America. Rebuildable.

The RSV3G35D-PKG is protected by Annovi Reverberi’s 2-year limited warranty through the US-based warranty and service network administered by AR North America. Every wear component — brass head seals, ceramic pistons, bronze connecting rods, chemical injector, TRV, and filter screen — is stocked nationally through authorized AR North America service centers. Contractors, OEM builders, fleet operators, agricultural operations, resellers, and volume buyers are invited to contact the WSHPWR wholesale team for pricing on the RSV3G35D-PKG and the complete WSHPWR pump package lineup.

10,500.0 Cleaning Units. 3,500 PSI. 3.0 GPM. Brass Head. Bronze Rods. F40 1″ Shaft. TRV. Fixed 12% Injector. Vented Dipstick. 16 oz Pre-Filled Oil. Everything in One Box.

Annovi Reverberi RSV Series. Contractor Grade. Brass Head. Bronze Rods. F40 1″ Shaft. Fully Rebuildable. 2-Year US Warranty.

The RSV3G35D-PKG is the complete contractor-grade axial platform solution for operators who need 3.0 GPM at 3,500 PSI with brass head construction, bronze connecting rods, and F40 1″ shaft compatibility with the full range of contractor gas engines. Brass head. Bronze connecting rods. TRV. Fixed 12% integrated injector. Swivel garden hose adapter. Stainless filter screen. Hex locking fasteners. Vented dipstick. 16 oz pre-filled oil. Operations manual with parts schematic. 14 lbs. Two-year US warranty. Nationwide service centers. Fully rebuildable.

Volume buyers and contractors can reach the WSHPWR wholesale team directly at wholesale@wshpwr.com to discuss pricing across the complete Annovi Reverberi pump package lineup.