HYD-RTX60.300P RTX60 Pump Motor Package | Direct Drive

HYD-RTX60.300P RTX60 Pump Motor Package | Direct Drive

• HYD-RTX60.300P is a ready-to-integrate hydraulic drive package that directly couples a
  low-speed/high-torque hydraulic motor to an Annovi Reverberi RTX60.300 triplex plunger pump
  on a rigid, alignment-stable base.
• Eliminates belts and bulky guards while keeping shaft centerlines true to help protect bearings and
  seal packs and reduce alignment drift over time.
• HYD-RTX60.300P RTX60 is engineered for demanding industrial duty and delivers approximately
  60 L/min (≈15.9 GPM) at 300 bar (≈4350 PSI) at ≈1450 RPM.
• Installer-friendly layout provides clear access to the coupling, oil sight glass, and vented dipstick so
  a single technician can perform routine checks, oil changes, and torque verification quickly.
• Compact footprint simplifies mounting on mobile wash skids, plant carts, work trucks, and fixed wash
  systems where space and service access are at a premium.

Hydraulic Motor & Circuit

• Uses a displacement-matched LSHT (gerotor/geroler-style) hydraulic motor sized to reach
  the pump’s target RPM and torque at pressure; manufacturer may vary.
• Interfaces cleanly with mobile/industrial circuits via pressure and return ports typically specified
  around SAE-12 (3/4″ ORB), with an auxiliary case-drain port often
  SAE-8 (1/2″ ORB) when required by the motor build.
• Observe A/B port orientation for correct rotation, route the case drain above reservoir oil level to
  prevent aeration, size hoses generously, and respect bend radii to avoid restriction and heat.
• Protect the circuit with upstream relief valves suitable for 300 bar service and
  provide 10–25 µm return filtration with an adequate β-rating.
• Size the hydraulic reservoir HYD-RTX60.300P RTX60 for heat rejection and add an oil cooler for hot climates, extended bypass
  periods, or continuous-duty cycles to maintain oil temperature within recommended limits.

HYD-RTX60.300P RTX60 Pump Ports & Water-Side Plumbing

• RTX-series heads are straightforward to plumb with typical ports of a
  1″ female BSPP inlet and a 1/2″ female BSPP discharge;
  adapters to NPT are readily available.
• Keep the suction run short, straight, and oversize; use a coarse inlet strainer and anti-collapse
  suction hose to preserve volumetric efficiency and prevent cavitation.
• Use a correctly sized unloader valve matched to RTX duty to maintain working pressure
  while safely bypassing flow to tank.
• Add a high-pressure relief valve and a glycerin-filled pressure gauge
  for commissioning, diagnostics, and ongoing verification of operating pressure.
• Include a thermal relief valve on the bypass loop to protect seals and packings
  during extended gun-closed or bypass operation.

HYD-RTX60.300P RTX60 Pump Motor Package | Direct Drive

Integration Checklist

• Match hydraulic motor displacement and available flow to achieve ≈1450 RPM at the desired
  working pressure.
• Verify prime mover and valve stack capacity with margin for other actuators and thermal headroom.
• Set upstream reliefs accurately; confirm return filtration, reservoir volume, and cooling capacity
  for continuous-duty operation.
• Provide a case drain if specified by the motor build and route it above tank oil level.
• Select nozzle orifices for the desired flow/pressure combination and never overspeed the pump.
• Plan a low-pressure recirculation path for prolonged bypass to minimize heat and protect components.
• Schedule periodic torque checks on head, manifold, and coupling fasteners—especially after first
  run-in—following AR’s recommended procedures.

Typical Applications

• Mobile wash skids on service trucks and trailers.
• Municipal fleet and sanitation vehicles requiring high-pressure washdown.
• Food & beverage plant sanitation and processing cleanup
  (observe local hygienic and materials-compatibility standards).
• Marine and dock washdown on tug and work boats.
• Aquaculture facilities and fish-processing support systems.
• Equipment-yard rinse stations for construction and rental fleets.
• Conveyor and parts-cleaning cells in industrial plants.
• Agriculture and ranch equipment wash bays and barn cleanup systems.
• Contractor rigs and OEM builds that already carry hydraulic power.

Ownership, Warranty & Key Details

• Manufacturer & origin: Annovi Reverberi, Modena, Italy—recognized leader in
  high-pressure pump quality since 1958. HYD-RTX60.300P RTX60
• Water performance: ≈60 L/min (≈15.9 GPM) @ 300 bar (≈4350 PSI) at ≈1450 RPM.
• Hydraulic motor: LSHT, displacement-matched; pressure/return typically SAE-12 ORB with
  SAE-8 case drain (verify on selected motor).
• Pump ports: typically 1″ F BSPP inlet and 1/2″ F BSPP outlet; adapters to NPT available.
• Supplied from factory: pump ships with oil in the crankcase plus an easy-to-read sight glass
  and vented dipstick for proper fill and breathing under thermal expansion.
• Follow AR’s lubricant recommendations and service intervals, confirm seal and O-ring compatibility where
  detergents or process fluids are used, and maintain inlet screening to extend valve and seal life.
• Warranty: 5-year limited, conditional warranty—proper hydraulic and water installation,
  filtration, lubrication, and operation within published limits are required; seals and valves are
  considered consumable wear items.
• Service parts (seal kits, valve kits, unloaders, gauges, adapters) and AR documentation with exploded
  views and torque specs are widely available to streamline maintenance and minimize downtime.