HYD-RTX30.500P RTX30 Pump Motor Package | Direct Drive

HYD-RTX30.500P RTX30 Pump Motor Package | Direct Drive

• HYD-RTX30.500P is a ready-to-integrate hydraulic drive package that directly couples a
  low-speed/high-torque (LSHT) hydraulic motor to the Annovi Reverberi RTX30.500 triplex plunger pump
  on a rigid, alignment-stable base.
• Delivers the classic RTX30 performance of approx. 8.0 GPM (30 L/min) at up to 4350 PSI (300 bar) at
  1450 RPM without belts, pulleys, or periodic retensioning.
• Built in Modena, Italy by Annovi Reverberi—an industry leader in high-pressure pump quality
  since 1958.
• Compact footprint and direct-drive geometry minimize side loading on bearings and seal packs for smoother
  running, lower vibration, and longer service life.

Installer-Friendly Design HYD-RTX30.500P

• Service-friendly and installer-ready layout with clear sight to the coupling, an
  easy-to-read oil sight glass, and a vented dipstick.
• Allows a single technician to perform routine checks, torque verification, and oil changes quickly with
  common tools.
• Base geometry anticipates real-world plumbing: short, direct suction runs, tidy pressure and bypass routing,
  and perimeter space for an unloader block without tight bends.

Hydraulic Motor Interface

• Uses a displacement-matched LSHT (gerotor/geroler-style) hydraulic motor—brand may vary—sized
  to achieve the pump’s rated RPM and torque at pressure.
• Integrates into standard mobile/industrial circuits via pressure and return ports typically
  SAE-12 (3/4″ ORB) with an auxiliary case-drain port commonly
  SAE-8 (1/2″ ORB) when required by the motor build.
• Observe A/B port orientation for correct rotation, route the case drain above reservoir oil level to prevent
  aeration, size hoses generously, and respect bend radii to avoid restriction.
• Protect the circuit with upstream reliefs suitable for 300 bar service and provide return
  filtration in the 10–25 μm range (adequate β-rating).
• Size the reservoir for heat rejection and add an oil cooler for hot climates, prolonged bypass, or
  continuous-duty operation.

Water-Side Connections

• RTX series HYD-RTX30.500P uses straightforward high-flow porting:
  1″ female BSPP inlet and 1/2″ female BSPP discharge.
• Adapters to NPT are readily available for easy integration into North American plumbing.
• Keep suction runs short, straight, and oversize; use a coarse inlet strainer and
  anti-collapse suction hose to preserve volumetric efficiency and prevent cavitation.
• Use a correctly sized unloader to maintain working pressure while safely bypassing flow to
  tank, and add a high-pressure relief plus glycerin-filled gauge for
  commissioning and diagnostics.
• Include a thermal relief valve on the bypass loop to protect seals during extended
  gun-closed operation.

Ownership & Maintenance

• Ships with factory oil fill in the crankcase, a vented dipstick, and a sight glass for proper
  fill level and breathing under thermal expansion.
• Follow Annovi Reverberi’s lubricant recommendations and service intervals; periodically torque-check
  head, manifold, and coupling fasteners.
• Size nozzle orifices for your chosen flow/pressure point and never overspeed the pump.
• Confirm seal and O-ring compatibility when using detergents or process fluids and respect published
  temperature limits.

HYD-RTX30.500P Typical Applications

• Mobile wash skids on service trucks and work trucks.
• Municipal fleet and sanitation vehicles.
• Equipment-yard rinse stations and rental fleet rigs.
• Plant carts for conveyor and parts-cleaning cells.
• Food & beverage sanitation support (observe local hygienic standards).
• Marine and dock washdown on work and tug boats.
• Agriculture and ranch equipment wash.
• Contractor systems and mobile rigs that already carry hydraulic power.

Warranty & Support

• HYD-RTX30.500P Pump is manufactured by Annovi Reverberi and covered by a
  5-year limited, conditional warranty.
• Proper installation (hydraulic and water), filtration, lubrication, and operation within published limits
  are required for coverage.
• Normal wear items such as seals and valves are considered consumables.
• Seal kits, valve kits, unloaders, gauges, adapters, and documentation with exploded views and torque specs
  are widely available across North America to streamline maintenance and minimize downtime.

HYD-RTX30.500P RTX30 Pump Motor Package | Direct Drive

At-a-Glance Specs

• Manufacturer & Origin: Annovi Reverberi, Modena, Italy – leader in high-pressure pumps since 1958.
• Performance: Approx. 8.0 GPM (30 L/min) @ up to 4350 PSI (300 bar) @ 1450 RPM.
• Hydraulic Motor: LSHT, displacement-matched; pressure/return typically SAE-12 ORB; case drain typically SAE-8 ORB (verify on selected motor).
• Pump Ports: 1″ F BSPP inlet and 1/2″ F BSPP outlet; adapters to NPT available.
• Includes: Factory oil fill, sight glass, and vented dipstick.
• Key Advantages: Compact direct drive, no belt dust, reduced alignment drift, fast single-tech service.
• Ideal Uses: Service trucks, mobile wash skids, municipal fleets, rental and contractor rigs, plant carts, marine and sanitation washdown systems.