17G3000-40HP-V | Electric Pressure Washer |17 GPM 3000 PSI 40 HP

17G3000-40HP-V Industrial Electric Pressure Washer | 17 GPM | Max Pressure 3000 PSI | 40 HP VFD

The 17G3000-40HP-V is a high-flow industrial electric pressure washer
delivering a maximum pressure of 3000 PSI at 17 GPM,
powered by a 40 HP electric motor paired with an Annovi Reverberi
RTD-series solid-shaft triplex pump and an integrated Variable Frequency Drive
(VFD). The 17G3000-40HP-V is engineered for plants and
facilities that need strong cleaning power, high rinse volume, and programmable
control — 3000 PSI max pressure removes road film, light oxides, and compacted
industrial soils while 17 GPM flushes loosened debris to drains rapidly, reducing
passes and minimizing rework on large pads, bays, and production floors.

At 3000 PSI max pressure, the 17G3000-40HP-V delivers effective
mechanical cleaning action while remaining safe for painted housings, elastomers,
labels, and seals — making it the right choice for facilities that need aggressive
throughput without the surface damage risk of higher-pressure systems. The integrated
VFD provides soft start, adjustable accel/decel ramps, and stored pressure and flow
profiles so operators select Wash, Prep, or Rinse at the keypad for consistent
results across shifts with reduced unloader chatter, lance kick, and mechanical shock
during frequent cycling. Fully electric and zero-emission, the
17G3000-40HP-V is built for indoor wash bays, sanitation cells,
and production environments where engine platforms are not practical or permitted.

17G3000-40HP-V Performance Specifications

Max Pressure, Flow & Power at a Glance

• Max Pressure: 3000 PSI — the rated maximum working pressure
  of the 17G3000-40HP-V system; effective mechanical cleaning action safe
  for painted surfaces, elastomers, labels, and sensitive equipment
• Max Flow Rate: 17 GPM — high-volume output for rapid
  debris carry-off, large wash bays, and multi-zone industrial cleaning
  in fewer passes
• Motor: 40 HP — correctly sized for the RTD pump’s
  17 GPM duty demand at 3000 PSI max pressure with margin for hose
  runs, distribution, and accessories
• Drive: Variable Frequency Drive (VFD) integrated —
  programmable ramps, stored profiles, soft starts, and process
  consistency across shifts
• Pump: Annovi Reverberi RTD-series solid-shaft triplex
  plunger pump — rigid coupling configuration for precise alignment and
  reliable high-flow power transfer
• Water Horsepower: 17 GPM × 3000 PSI ÷ 1714 ≈ 29.8 HP
  theoretical — 40 HP motor provides meaningful overhead above demand at
  rated 3000 PSI max pressure for sustained long-cycle operation
• Configuration: Fully enclosed electric — zero exhaust
  emissions, low noise, indoor-rated for food processing, sanitation,
  and production environments
• Alternative: base model 17G3000-40HP
  available without VFD for applications not requiring
  programmable control

Why 17 GPM at 3000 PSI Max Pressure

17G3000-40HP-V Duty Point — Balanced Pressure and High-Flow Throughput

• 3000 PSI max pressure removes industrial soils efficiently:
  road film, light oxides, compacted floor contamination, and equipment
  soils yield to 3000 PSI max pressure impact without requiring the
  complexity, cost, or surface-risk of ultra-high-pressure systems
• 17 GPM for maximum throughput: high flow flushes
  loosened debris to drains quickly after 3000 PSI max pressure impact —
  reducing the number of passes required, minimizing rework, and
  shortening total bay turnover time on large industrial floor areas
• Surface-safe at 3000 PSI max pressure: 3000 PSI
  max pressure delivers effective cleaning on sensitive surfaces including
  painted equipment housings, elastomers, product labels, and seals —
  maximizing cleaning productivity without the damage risk that higher-pressure
  systems create on these substrates
• Containment-aware operation: VFD ramp limits can
  be matched to bay size and drain capacity — controlling overspray and
  redeposition at 17 GPM for cleaner operation in tighter facilities
  and contained wash zones
• 40 HP motor overhead: water horsepower at 3000 PSI
  max pressure sits at approximately 29.8 HP theoretical — the 40 HP
  motor provides meaningful margin for long duty cycles, distribution
  manifolds, and extended hose runs without thermal stress

RTD Pump Architecture

Annovi Reverberi RTD-Series — Built for 3000 PSI Max Pressure High-Flow Service

• Brass manifold head: durable, reliable metallurgy
  for industrial washdown at 3000 PSI max pressure — appropriate for
  general service applications including fleet maintenance, plant
  sanitation, and facility cleaning with standard industrial
  detergents and water chemistry
• Ceramic plungers: reduce heat transfer at the
  packing interface — extending water-seal life significantly during
  long-duration cycles and frequent start/stop operation at the
  17G3000-40HP-V’s rated maximum pressure and 17 GPM high-flow output
• Precision stainless valves and oversized crank bearings:
  ensure smooth, low-pulsation hydraulics across long hose runs and
  surface cleaner applications at 3000 PSI max pressure — protecting
  downstream accessories and hose assemblies from pressure cycling fatigue
• Guarded rigid coupling: preserves motor-to-pump shaft
  alignment, reduces vibration transmission, and protects bearings and
  seals — a key contributor to maximum MTBF and predictable service
  intervals at sustained 3000 PSI max pressure output
• Service-forward frame design: clear access to oil
  fill and drain, valve caps, and seal stacks keeps maintenance fast and
  repeatable without relocating the 17G3000-40HP-V from its
  installed position

What the VFD Delivers Day-to-Day

17G3000-40HP-V VFD Features at 3000 PSI Max Pressure

• Soft start and soft stop: motor ramps smoothly to
  operating speed at each startup — eliminating inrush current, lance kick,
  and mechanical shock to couplings, packings, and bearings at the
  3000 PSI max pressure operating point
• Adjustable accel/decel ramps: smoother pressure
  builds and drops when the trigger cycles — reducing unloader chatter,
  eliminating pressure overshoot at the 3000 PSI max pressure setpoint,
  and delivering a calmer, more controlled lance feel during
  high-frequency cycling
• Stored operating profiles: lock Wash, Prep, and
  Rinse pressure and RPM presets to facility SOPs — operators select
  at the keypad for repeatable results at rated 3000 PSI max pressure
  across all shifts without manual adjustments or nozzle changes
• Repeatable workflows: consistent cleaning outcomes
  across all operators and shifts at 3000 PSI max pressure — standardized
  profiles eliminate variance in cleaning quality caused by different
  operator habits or manual pressure settings
• Component protection: VFD soft starts and controlled
  ramps lower shock loads on couplings, packings, and valve seats at
  every startup cycle — extending component life significantly between
  service intervals at rated max pressure

17G3000-40HP-V Operator Experience

Working at 3000 PSI Max Pressure in Enclosed Industrial Facilities

• Smoother starts, reduced lance kick: VFD-controlled
  ramping at 3000 PSI max pressure eliminates the startup hose whip and
  pressure surge that fixed-speed systems produce at every cycle —
  operators work more comfortably with significantly less fatigue
  across long cleaning shifts
• Fast, efficient sweep at 17 GPM: high flow moves
  loosened debris and slurry to drains quickly after 3000 PSI max
  pressure impact — the zone clears efficiently without overwhelming
  bay drainage capacity or requiring multiple rework passes
• Zero exhaust, low noise: enclosed electric operation
  makes the 17G3000-40HP-V ideal for indoor wash cells, sanitation rooms,
  and production-adjacent facilities where engine platforms are
  restricted or prohibited
• Consistent shift-to-shift performance: stored VFD
  profiles at the rated 3000 PSI max pressure setpoint deliver the same
  cleaning quality regardless of which operator is running the
  17G3000-40HP-V — eliminating variance and simplifying
  operator training

17G3000-40HP-V Priority Applications

Where 3000 PSI Max Pressure and 17 GPM Deliver Results

• Food and beverage sanitation: floor rinse-downs,
  drain flushing, rack and tote cleaning in zero-emission indoor
  environments at 3000 PSI max pressure — verify chemical compatibility
  and facility SOPs for all cleaning agents used with this system
• Fleet and transit maintenance: pads, bays, frames,
  and wheel-ends — 17 GPM at 3000 PSI max pressure delivers quicker
  bay turnaround for buses, refuse trucks, tractors, and heavy
  transport fleets
• Industrial and MRO facilities: coolant and fines
  washout, machine surrounds, stubborn floor deposits, and production
  equipment cleaning where 3000 PSI max pressure combined with 17 GPM
  carry-off minimizes passes and rework
• Facilities and property maintenance: loading docks,
  parking decks, and concrete surface preparation before coatings,
  sealers, or line repainting at controlled 3000 PSI max pressure
  with high-flow efficiency
• Multi-zone industrial facilities: VFD stored profiles
  make the 17G3000-40HP-V ideal for operations cleaning multiple surface
  types per shift — operators switch between zones at the keypad without
  adjusting 3000 PSI max pressure manually or changing nozzle tips

17G3000-40HP-V Integration & Installation

Best Practices for System Setup at 3000 PSI Max Pressure

• Electrical setup: size supply conductors, disconnect,
  and overload protection to the 40 HP motor nameplate; incorporate E-stop
  and lockout/tagout procedures; program VFD ramp times, stop mode,
  overload limits, and interlocks for low water, over-temp, and overload
  fault conditions per facility SOPs
• Suction plumbing: keep inlet runs short, straight,
  and full-bore — RTD-series triplex pumps at 3000 PSI max pressure and
  17 GPM require adequate NPSH margin; protect packing life by
  avoiding elbows and restrictions near the pump inlet
• Bypass management: return bypass flow to the supply
  tank — especially with warm water — to stabilize inlet temperature
  and extend packing life during extended 3000 PSI max
  pressure operation
• Distribution: use a balanced manifold with proper
  nozzling for multi-gun configurations; verify all accessories are
  rated for a minimum of 3000 PSI at operating temperature for safe
  operation at rated max pressure
• Inlet filtration: oversize the inlet strainer —
  low-cost protection for valves, seats, and seals at 3000 PSI max
  pressure, critical with reclaimed, hard, or mineral-heavy
  water supply

17G3000-40HP-V Maintenance & Serviceability

Routine Service to Maintain 3000 PSI Max Pressure Performance

• First pump oil change at approximately 50 operating
  hours, then follow Annovi Reverberi’s RTD-series maintenance schedule;
  investigate milky or discolored oil immediately as it indicates
  water ingress into the crankcase
• Water seals and valves: replace seals at the first
  sign of weeping; refresh valve sets if startup pressure fails to reach
  the 3000 PSI max pressure setpoint, pulsation increases, or recovery
  slows after trigger release
• Coupling alignment checks: recheck rigid coupling
  alignment and all mounting hardware after initial installation, after
  transport, and during each seasonal service interval to protect bearings
  and seals at rated max pressure
• VFD parameters: document and back up all stored
  profiles, ramp settings, and interlock configurations — restore
  immediately if the VFD is replaced or reset to maintain 3000 PSI
  max pressure setpoint accuracy across all stored
  cleaning profiles
• Service log: maintain a concise record of oil changes,
  seal and valve replacements, alignment checks, and VFD parameter
  updates — identify trends early and stage parts proactively to
  protect uptime at 3000 PSI max pressure

Why Choose the 17G3000-40HP-V

3000 PSI Max Pressure, High Flow, and Full VFD Control

• 17 GPM at 3000 PSI max pressure — throughput leader:
  more flow than comparable 3000 PSI systems — 17 GPM clears large areas
  faster, reduces re-passes, and shortens bay turnover time versus any
  lower-flow alternative at equivalent max pressure
• Surface-safe 3000 PSI max pressure: clean production
  equipment, fleet vehicles, and facility surfaces aggressively without
  risking damage to painted surfaces, elastomers, or sensitive labels
  that higher-pressure systems would compromise
• VFD over fixed-speed: programmable ramps, stored
  profiles, soft starts, and process standardization make the 17G3000-40HP-V
  more productive, more efficient, and easier on components than any
  fixed-speed electric alternative at 3000 PSI max pressure
• Zero emissions, indoor-rated: fully enclosed electric
  operation at 3000 PSI max pressure makes this system appropriate for
  food processing, sanitation-critical environments, and enclosed
  production facilities where combustion engines are not permitted
• Annovi Reverberi RTD-series reliability: proven
  solid-shaft triplex pump platform with brass manifold, ceramic plungers,
  stainless valves, and predictable maintenance intervals — wide OEM
  parts availability across the U.S. and Canada
• Backed by WSHPWR: expert system integration support,
  application guidance, and parts availability for the 17G3000-40HP-V
  and the full Annovi Reverberi RTD pump platform

The 17G3000-40HP-V delivers 3000 PSI maximum pressure
at 17 GPM from a 40 HP VFD-controlled electric system
built on the proven Annovi Reverberi RTD-series triplex pump — engineered for
high-throughput industrial facilities where balanced 3000 PSI max pressure cleaning
power, maximum rinse volume, programmable control, and zero-emission indoor operation
are all required. Contact WSHPWR for current pricing, availability, and system
configuration support.

Related 40HP Industrial Pressure Washer Systems

Explore related 40HP industrial electric pressure washer systems designed for high-flow cleaning applications, alternative PSI configurations, and demanding commercial-duty operation.

• 18G3000-40HP-V Electric Pressure Washer – 3000 PSI
• 16G3500-40HP-V Electric Pressure Washer – 3500 PSI
• 14G4000-40HP-V Electric Pressure Washer – 4000 PSI
• Browse All 40HP High-Pressure Skid Units

Compatible Industrial Applications

This 40HP industrial electric pressure washer skid unit is designed for commercial cleaning operations requiring high water flow, skid-mounted durability, and continuous-duty electric performance.