TPR400-06 Rotating Nozzle | 5800 PSI Extreme Turbo

TPR400-06 Rotating Nozzle | 5800 PSI Extreme Turbo

The Annovi Reverberi TPR400-06 Rotary Turbo Nozzle is a heavy-duty, high-flow rotary jet nozzle built for large-scale commercial and industrial cleaning. Featuring a 6.0 nozzle size, a professional 1/4″ female inlet, and a maximum operating pressure of 5,800 PSI (400 bar), this nozzle transforms high-GPM pump output into a powerful rotating 0° stream. The result is an aggressive rotary cone pattern that clears away thick grime, hardened buildup, and stubborn staining on concrete, steel, masonry, and other hard surfaces.

Based on AR’s dependable TPR400 series, the TPR400-06 uses a brass body, ceramic orifice, and balanced rotor engineered for sustained, daily professional use. Rated for water temperatures up to 212°F, it integrates easily with hot-water systems for degreasing and sanitation. When crews need to cover large areas quickly while still hitting contamination hard, this 6.0-size nozzle is a go-to choice.

Key Specifications

• Model: TPR400-06 High-Pressure Rotary Turbo Nozzle
• Nozzle Size: 6.0
• Max Pressure: 5,800 PSI
• Max Temperature: 212°F
• Inlet: 1/4″ F
• Pattern: Rotary 20° cone (approx.)
• Body: Brass
• Orifice: Ceramic

Performance & Design Highlights

• High-flow 6.0 orifice: Designed for larger pumps where higher GPM is available for big cleaning jobs.
• Rotating 0° jet: Spins a concentrated stream for deep penetration and fast removal of heavy contamination.
• High-pressure build: 5,800 PSI rating gives the cutting strength needed for demanding industrial tasks.
• Hot-water ready: 212°F capability supports hot-water degreasing and sanitation.
• Continuous-duty construction: Robust materials and rotor design handle long runtime and frequent use.

Typical Applications

• Large concrete surfaces: Lots, yards, bays, large pads, and ramps.
• Industrial plants: Processing floors, spill zones, containment areas.
• Fleet & equipment maintenance: Cleaning heavy road film, sludge, and caked mud from machinery and vehicles.
• Surface restoration: Aggressive removal of aged coatings and built-up contaminants.

Sizing & Compatibility

• Pair with higher-GPM, high-pressure washers.
• Stay within 5,800 PSI and 212°F ratings.
• Standard 1/4″ F connection fits most pro guns and wands.

Maintenance

• Flush system prior to use to keep debris out of the nozzle.
• Start with spray aimed at a durable target while rotor speeds up.
• Adjust working distance for optimal combination of cut and coverage.
• Inspect routinely and replace when rotation or pattern degrades.