XTV2G15EBA-F8M2 2.0 GPM 1500 PSI Pump | F8M2 Mount

XTV2G15EBA-F8M2 by Annovi Reverberi — Triplex Plunger Pump with Gymatic Unloader | 2.0 GPM | 1,500 PSI | Brass Head | NEMA 56C Electric Motor Mount | No Chemical Injector

The XTV2G15EBA-F8M2 by Annovi Reverberi is a compact commercial-grade triplex ceramic plunger pump engineered for electric motor-driven pressure washing systems that require consistent, surface-safe water delivery and dependable Gymatic bypass pressure control — without an integrated downstream chemical injector. Rated at 2.0 GPM and 1,500 PSI at 3,400 RPM, the XTV2G15EBA-F8M2 close-couples directly to NEMA 56C-frame electric motors via its F8 face flange and delivers smooth, low-pulsation cleaning performance for indoor wash bays, detail shops, rental fleets, facility maintenance stations, and system builders who manage chemical delivery independently from the pump.

Built by Annovi Reverberi in Modena, Italy — with US-based operations, a domestic parts distribution network, and dedicated AR North America technical support — the XTV2G15EBA-F8M2 arrives as a complete, factory-tested assembly. Pre-filled with AR break-in oil, equipped with a Gymatic 3/B unloader, and packaged with mounting bolts and fasteners, a vented dipstick, operator’s manual, and full parts schematic, this pump is ready to install from the moment it arrives. Protected by a 5-year US limited warranty through AR North America and built to be fully rebuilt rather than replaced, the XTV2G15EBA-F8M2 is a long-term investment in a pump platform capable of a decade of productive service life.

Decoding the XTV2G15EBA-F8M2 Model Number

What Every Segment of This AR Pump Designation Tells You

Annovi Reverberi encodes all critical specification data — performance output, shaft type, head material, connecting rod material, flange interface, and unloader family — directly into the pump model number. Reading the XTV2G15EBA-F8M2 correctly before specifying or installing confirms drive compatibility, material construction, and unloader configuration:

• XTV — Pump series: XT Series triplex plunger pump
• 2G15 — Performance rating: 2.0 GPM flow rate at 1,500 PSI maximum operating pressure
• E — Shaft version: Electric motor shaft — compatible with 5/8″ or 1-1/8″ hollow shaft electric motor drives
• BA — Material specification: Forged Brass manifold head with Aluminum connecting rods — brass delivers corrosion resistance and pressure integrity at the wetted end; aluminum connecting rods reduce reciprocating mass for smooth high-RPM crankcase operation
• F8 — Flange type: NEMA 56C close-coupling face mount for XTV Series ‘E’ version pumps with 5/8″ I.D. shaft (AR part AR1584)
• M2 — Unloader code: Gymatic (C2 = Gymatic per AR suffix designation) — Gymatic 3/B series internal bypass unloader, brass body, adjustable pressure regulation, factory-fitted
• No trailing suffix — the model number terminates at M2, indicating the Gymatic unloader is fitted without a downstream chemical injector port — functionally equivalent to the injector-absent “N” configuration and distinct from the XTV2G15EBAF8M2I, which includes the integrated downstream injector

A Critical Correction — This Is a Gymatic Unloader, Not a Minimatic

The XTV2G15EBA-F8M2 is fitted with a Gymatic 3/B unloader — not a Minimatic as incorrectly described in some product listings. Per Annovi Reverberi’s suffix nomenclature, M2 = C2 = Gymatic. The Minimatic unloader carries a plain “M” suffix with no number. These are two distinct unloader families with different body materials, pressure ratings, flow capacities, and service parts. The Gymatic 3/B on this pump features a brass body, adjustable pressure regulation, and a rating of 3,650 PSI at 3–4 GPM — well above the pump’s 1,500 PSI operating pressure.

XTV2G15EBA-F8M2 vs XTV2G15EBAF8M2I — Choosing the Right Variant

These two models share identical pump construction, flange, and Gymatic unloader family. The operative difference is the injector configuration:

• XTV2G15EBA-F8M2 — Gymatic unloader fitted, no chemical injector. Correct for systems using a dedicated external downstream injector, soft wash chemical delivery systems, proportioners, or applications delivering straight water pressure only.
• XTV2G15EBAF8M2I — Gymatic unloader fitted with integrated downstream chemical injector. Correct for operators who want a self-contained assembly capable of both high-pressure rinse and low-pressure detergent application without additional injector hardware.

Confirming the correct variant before ordering avoids a pump return and ensures your chemical delivery architecture matches the pump configuration you receive.

Key Specifications

XTV2G15EBA-F8M2 Technical Details at a Glance

• Flow Rate: 2.0 GPM (gallons per minute)
• Maximum Pressure: 1,500 PSI
• Operating Speed: 3,400 RPM
• Pump Type: Triplex ceramic plunger pump — three-piston crankshaft-driven design for smooth, consistent, low-pulsation output
• Head Material: Forged brass (B) — dense, pore-free wetted-end construction for corrosion resistance and long-cycle pressure integrity
• Connecting Rods: Aluminum (A) — reduced reciprocating mass for smooth high-RPM operation and lower bearing load
• Plungers: Solid ceramic — exceptional hardness, wear resistance, and chemical inertness across extended commercial operating hours
• Valves: Stainless steel — precise seating geometry, scale resistance, and reliable high-cycle performance
• Shaft Compatibility: Electric motor E-version — 5/8″ or 1-1/8″ hollow shaft
• Flange: F8 — NEMA 56C close-coupling face mount for XTV Series ‘E’ version (AR part AR1584)
• Unloader System: Gymatic 3/B series (M2 / C2 code) — brass-body internal bypass unloader, adjustable pressure regulation, rated to 3,650 PSI and 3–4 GPM
• Unloader Part Reference: AR20399 — adjustable Gymatic unloader, 1/2″ M inlet, 3/8″ M outlet, brass body
• Chemical Injector: Not included — model number terminates at M2 with no injector suffix
• Warranty: 5-year limited warranty — US-based coverage through AR North America with domestic parts and service support

What’s Included in the Box

A Complete, Factory-Configured Assembly Ready for Installation

Every XTV2G15EBA-F8M2 ships fully assembled and field-ready:

• Factory-installed Gymatic 3/B unloader (AR20399) — pre-mounted for internal bypass pressure regulation without downstream injector port
• AR factory break-in oil — crankcase pre-filled to the correct operating level for first startup without modification
• Vented dipstick — enables fast, accurate crankcase oil level checks while maintaining proper crankcase pressure relief during operation
• Clear oil sight glass — at-a-glance oil level monitoring without removing the dipstick cap
• Mounting bolts and fasteners — hardware pre-selected and sized for F8 NEMA 56C face-mount installation on compatible electric motors
• Operator’s manual — complete installation, startup, operating, and maintenance procedures including oil change intervals and winterization protocol
• Parts schematic — exploded-view diagram with AR part numbers for every serviceable pump component for field and shop reference
• Factory test certification — every XTV2G15EBA-F8M2 load-tested at 50%, 100%, and 150% of rated output before leaving the AR manufacturing facility

Brass Head, Aluminum Connecting Rods — The BA Material Specification

Corrosion Resistance at the Wetted End, Mechanical Efficiency in the Crankcase

The BA designation in the XTV2G15EBA-F8M2 model number defines the construction at two critical points in the pump’s architecture, each chosen for a specific engineering purpose:

• Forged brass manifold head (B) — the manifold is where water, pressure, and cleaning chemistry interact continuously. Forged brass provides a dense, pore-free structure that resists the corrosive attack of chlorinated water, hard water mineral deposits, and the detergent solutions common to commercial wash system environments. The brass head outlasts cast aluminum manifolds under sustained chemical exposure and cyclic pressure stress, making it the material of choice for the wetted end of a pump intended for long commercial-duty service life.
• Aluminum connecting rods (A) — the connecting rods transmit crankshaft rotation into plunger reciprocation inside the crankcase. Aluminum’s lower density compared to steel reduces the reciprocating mass at each stroke, contributing to smoother crankshaft rotation at 3,400 RPM, reduced vibration transmission to the motor and mounting frame, lower bearing load across extended operating hours, and the quieter operating profile that makes this pump well suited to customer-facing detail shops and indoor wash bay environments.

The Gymatic Unloader — Tamper-Resistant Pressure Control for Clean Water Delivery

Stable Bypass Regulation Without Chemical Feed

The Gymatic 3/B unloader (AR20399) on the XTV2G15EBA-F8M2 is rated to 3,650 PSI — well above this pump’s 1,500 PSI operating pressure. AR unloader ratings carry an accepted 15% upside variance, and pairing a higher-rated unloader with a lower-pressure pump is deliberate practice: the wider operating margin produces a more stable regulation window, reduces mechanical wear on unloader internals, and extends the service interval by keeping the unloader well within its design envelope throughout the pump’s service life.

On the XTV2G15EBA-F8M2, the Gymatic is configured without a downstream chemical injector. This makes it the correct pump for:

• Systems with dedicated external downstream injectors — operators who prefer a separate, independently adjustable downstream injector rather than a fixed-ratio venturi injector built into the unloader body
• Soft wash and chemical proportioner systems — chemical delivery managed by a dedicated proportioning pump, batch tank, or metering system where ratio control requirements exceed what a fixed venturi injector provides
• Straight water pressure applications — concrete cleaning, surface prep, equipment washdowns, and fleet washing where detergent is not applied through the pump system
• OEM integrators standardizing chemical delivery independently — system builders who specify injector type, ratio, and placement separately from the pump across multiple system configurations

Once pressure is set and locked, the Gymatic’s tamper-resistant design holds that setting reliably across every operator and every cycle:

• Internal bypass operation — trigger-off bypass smoothly redirects flow through the bypass circuit, preventing deadhead pressure spikes that accelerate seal and valve wear during idle intervals
• Tamper-resistant pressure setting — once configured and locked, operating pressure is maintained consistently across rental cycles, crew shifts, and repeated daily use without re-adjustment or drift
• Motor load reduction in bypass — reduced back-pressure in trigger-off bypass mode lowers motor amperage draw and heat accumulation, protecting motor windings in continuous-use electric wash station environments
• Brass body construction — resists corrosion from cleaning chemicals, chlorinated supply water, and sustained indoor or outdoor exposure

F8 NEMA 56C Face Mount — Direct Electric Motor Integration

Compact, Aligned, Vibration-Free Installation

The F8 flange on the XTV2G15EBA-F8M2 provides a close-coupling face-mount interface for NEMA 56C-frame electric motors with a 5/8″ I.D. hollow shaft — the standard across major US electric motor manufacturers:

• Precision shaft concentricity — shared face-mount interface ensures factory-accurate shaft alignment without adjustment procedures or custom brackets
• Minimal installation footprint — compact coupled assembly suits wall-mount frames, cabinetized wash stations, portable carts, and space-constrained indoor installations
• Broad motor compatibility — NEMA 56C standard across major US electric motor manufacturers gives builders and integrators wide motor sourcing flexibility without changing the pump specification
• Supplied mounting hardware — bolts and fasteners sized for the F8 bolt pattern are included, eliminating an additional sourcing step during assembly

Why 2.0 GPM at 1,500 PSI Fits This Application Class

Surface-Safe, Efficient, and Quiet

• Surface-safe pressure — 1,500 PSI cleans effectively on painted surfaces, vehicle finishes, wood decking, vinyl siding, and composite materials where higher-pressure pumps risk finish damage or surface etching
• Lower motor demand — the moderate duty point requires less motor horsepower, enabling a smaller, more energy-efficient motor selection for fixed wash station builds without sacrificing cleaning performance for the intended application range
• Reduced water consumption — 2.0 GPM limits hourly water use, a meaningful advantage in metered supply facilities and wash stations with effluent containment or disposal cost requirements
• Quiet, low-vibration operation — lower operating pressure combined with aluminum connecting rods and triplex plunger design produces a smooth, quiet operating profile well suited to customer-facing environments and noise-sensitive installations
• Rental-appropriate output — effective cleaning performance for inexperienced users with meaningfully reduced surface damage risk compared to higher-pressure alternatives

Typical Applications

Where the XTV2G15EBA-F8M2 Delivers Best Results

• Systems with external downstream injectors or proportioners — the XTV2G15EBA-F8M2 provides clean, consistent high-pressure water supply while chemical delivery is managed by a separate, independently configurable system
• Automotive detail shops and car wash stations — surface-safe 1,500 PSI for painted finishes and trim, with chemical application handled through foam cannons, external injectors, or proportioners
• Rental equipment fleets — tamper-resistant Gymatic pressure control, durable BA construction, and factory-tested reliability maximize rental-ready uptime and minimize damage claims between rentals
• Indoor and covered wash bays — electric operation eliminates exhaust and noise; NEMA 56C direct mount enables compact wall-frame and cabinet-style installations
• Managed commercial cleaning crews — locked pressure settings deliver consistent, repeatable results across multiple operators without adjustment drift between jobs
• Custom electric wash skid builders — OEM integrators specifying pump and chemical delivery components independently for maximum system design flexibility
• Facility and property maintenance — storefronts, walkways, outdoor common areas, parking structures, and building exteriors requiring regular pressure cleaning without pump-integrated detergent feed

5-Year US Warranty and Full Rebuildability

Domestic Support Built to Last as Long as the Pump

The XTV2G15EBA-F8M2 is protected by Annovi Reverberi’s 5-year limited warranty through AR North America’s US-based warranty and service network. Every internal wear component — ceramic plungers, brass manifold seals and o-rings, stainless valve seats and springs, Gymatic unloader service parts, aluminum connecting rod assemblies, and crankcase bearings — is stocked domestically through AR’s authorized distribution channels.

With consistent maintenance — break-in oil change at 50 hours, scheduled oil changes every 500 hours or 3–5 months, annual valve and seal inspection, and proper winterization using RV-grade environmentally safe antifreeze — the XTV2G15EBA-F8M2 is engineered for 10 or more years of productive service life. AR North America’s domestic parts depth ensures rebuild kits, plunger sets, and Gymatic unloader service components are typically available same-week, keeping your operation running rather than waiting on international shipping timelines.

Clean Pressure. External Chemical Control. Italian Engineering.

The Right Pump When Your Chemical System Lives Outside the Unloader.

For operators, builders, and system integrators who need a compact electric-driven triplex pump with a forged brass head, tamper-resistant Gymatic pressure control, and clean high-pressure water delivery without a fixed-ratio injector built into the unloader, the XTV2G15EBA-F8M2 delivers a factory-tested, fully documented, and completely rebuildable platform from one of the global pressure pump industry’s most trusted manufacturers. Compact. Quiet. Configurable. Five years of US warranty. A decade of service life. The XTV2G15EBA-F8M2 is the correct specification when precision pressure control and external chemical management are both part of the system design.