XMV3G30DF24C2IF 3.0 GPM 3000 PSI Pump | F24C2IF Version

XMV3G30DF24C2IF by Annovi Reverberi — XMV Series Triplex Plunger Pump with Gymatic C2 Unloader and Fixed-Rate Chemical Injector | 3.0 GPM | 3,000 PSI | Forged Brass Manifold | 1″ Hollow Keyway Shaft | SAE J609a F24 Gas and Diesel Engine Drive | 3,400 RPM

The XMV3G30DF24C2IF by Annovi Reverberi is a professional-grade XMV Series triplex ceramic plunger pump engineered for gas and diesel engine-driven pressure washing systems requiring 3.0 GPM at 3,000 PSI with factory-integrated fixed-rate chemical injection capability. Rated at 3.0 GPM and 3,000 PSI at 3,400 RPM, the XMV3G30DF24C2IF delivers 9,000 cleaning units — combining 3.0 GPM output with 3,000 PSI cleaning force for fleet maintenance, construction equipment cleaning, agricultural operations, municipal services, commercial contractor wash rigs, and industrial facility maintenance — through a forged brass manifold, solid ceramic plungers, hardened stainless steel valves, and an F24 SAE J609a flange with 1″ hollow keyway shaft for direct coupling to compatible gasoline or diesel engines. As part of Annovi Reverberi’s pump and unloader assemblies stocked and supported by WSHPWR, the XMV3G30DF24C2IF arrives factory-configured and factory-tested, ready to deliver from the first startup.

The XMV3G30DF24C2IF carries the factory-installed Gymatic C2 adjustable unloader with integrated fixed-rate chemical injector — the IF designation confirming both a factory-installed injector (I) and a fixed injection rate (F) factory-preset at 12% draw rate. This fixed-rate design delivers consistent, predictable chemical concentration at every application without manual injector adjustment, making the XMV3G30DF24C2IF well suited for operators who run standard detergent programs where repeatable chemical concentration is more important than variable draw rate flexibility. Built by Annovi Reverberi in Modena, Italy — with US-based operations, a domestic parts distribution network, and dedicated technical support — this pump arrives pre-filled with factory break-in oil, factory-tested, and ready for installation. Protected by a 5-year US limited warranty and built to be fully rebuilt rather than replaced, the XMV3G30DF24C2IF is a long-term investment capable of a decade of productive service life.

Factory-Matched and Approved — The XMV3G30DF24C2IF Complete Assembly Advantage

No Mismatches. No Guesswork. No Warranty Risk. Just Install and Run.

Every XMV3G30DF24C2IF ships as a factory-matched, factory-approved, and factory-installed complete pump and unloader assembly:

• Factory-matched C2 with fixed-rate injector for 3,000 PSI — the Gymatic C2 adjustable unloader and IF fixed-rate injector are factory-calibrated for this pump’s 3.0 GPM / 3,000 PSI duty point. Pressure regulation and chemical draw rate are factory-set as a complete system.
• Factory-approved configuration — the complete assembly is Annovi Reverberi’s validated specification for this model. Operating with the factory-installed components maintains full 5-year warranty coverage.
• Factory-installed and tested — every XMV3G30DF24C2IF exits the manufacturing facility with the C2/IF assembly mounted, calibrated, and tested for flow, pressure, and leak-free operation before shipment.
• Eliminates mismatch returns — the factory-matched assembly eliminates incorrect unloader or injector specification before the pump leaves the box.
• Stress-free installation — mount to the engine via the F24 SAE J609a flange, connect system hoses, connect the detergent supply line to the injector port, add fuel, and start. The XMV3G30DF24C2IF arrives engineered, assembled, and ready.

Decoding the XMV3G30DF24C2IF Model Number

What Every Segment of This Annovi Reverberi Pump Designation Tells You

• XMV — Pump series: XMV Series heavy-duty triplex plunger pump — Annovi Reverberi’s commercial gas and diesel engine platform
• 3G — Pump series identifier for this XMV configuration
• 30 — Maximum pressure: 3,000 PSI — 3.0 × 3,000 = 9,000 cleaning units
• D — Shaft version: Direct Drive — 3,400 RPM for direct gas or diesel engine coupling per Annovi Reverberi model designation convention
• F24 — Flange type: SAE J609a — XMV Series ‘D’ version with 1″ hollow keyway shaft for direct coupling to compatible gas and diesel engines (Annovi Reverberi part AR41866)
• C2 — Unloader family: Gymatic 3/B adjustable unloader — smooth pressure regulation and safe bypass operation; factory-installed and factory-calibrated
• I — Chemical injector: Included — downstream chemical injector factory-integrated into the C2 assembly
• F — Fixed injection rate: Factory-preset at 12% draw rate — the injector on the XMV3G30DF24C2IF delivers a fixed 12% chemical-to-water draw ratio. This rate is factory-set and does not adjust in the field, unlike standard variable-rate downstream injectors.

Understanding the IF — Fixed-Rate vs Variable-Rate Chemical Injection

12% Fixed Draw Rate. Consistent Chemical Concentration. No Adjustment Required.

The IF designation on the XMV3G30DF24C2IF identifies a specific injector configuration that differs from the standard I-suffix variable-rate injector found on most other Annovi Reverberi pump models in this catalog:

• Fixed 12% draw rate (F designation) — the injector on the XMV3G30DF24C2IF is factory-preset to draw chemical at a fixed 12% ratio of total water flow. At 3.0 GPM, this delivers approximately 0.36 GPM of chemical concentrate drawn into the water stream at every application. The draw rate does not change with nozzle selection or pressure variation.
• Standard variable-rate injector (I designation — other models) — most Annovi Reverberi pump models with an I suffix use a downstream venturi injector whose draw rate varies with flow velocity. Operators adjust chemical concentration by changing nozzle size or dilution ratio in the detergent solution.
• When the F designation is the right specification — operators who run standardized detergent programs, use pre-diluted chemical solutions, or prefer a consistent, predictable chemical ratio at every job without adjusting injector settings benefit from the XMV3G30DF24C2IF’s fixed-rate design.
• When a variable-rate injector may be preferred — operators who adjust chemical concentration across different job types, surface materials, or soil levels may prefer a standard I-suffix model such as the XMV3G30DF24C2I for greater flexibility in chemical draw rate.

Key Specifications

XMV3G30DF24C2IF Technical Details at a Glance

• Flow Rate: 3.0 GPM (gallons per minute)
• Maximum Pressure: 3,000 PSI
• Cleaning Units: 9,000 (GPM × PSI)
• Operating Speed: 3,400 RPM
• Pump Type: XMV Series triplex ceramic plunger pump — smooth, consistent high-pressure output
• Flange: F24 — SAE J609a, 1″ hollow keyway shaft, gas and diesel engine compatible (Annovi Reverberi part AR41866)
• Manifold Material: Forged brass — high-strength corrosion resistance for continuous-duty commercial operation
• Plungers: Precision-ground solid ceramic — reduced friction, heat, and seal wear
• Valves: Hardened stainless steel — reliable sealing under high pressure and chemical exposure
• Serviceability: Oil sight glass and vented dipstick for simplified routine maintenance
• Lubrication: Oil-bath crankcase with factory pre-filled break-in oil
• Unloader System: Gymatic C2 — factory-installed adjustable unloader with smooth bypass; banjo bolts and sealing O-rings included
• Chemical Injector: Included — fixed-rate injector factory-preset at 12% draw rate (IF designation)
• Warranty: 5-year limited warranty — US-based coverage through Annovi Reverberi North America

What’s Included in the Box

A Complete, Factory-Configured XMV3G30DF24C2IF Assembly Ready for Installation

• Factory-matched Gymatic C2 adjustable unloader with fixed-rate chemical injector (IF) — installed and calibrated for the 3.0 GPM / 3,000 PSI operating point; fixed 12% draw rate factory-set; injector port ready for detergent supply line connection
• Banjo bolts and sealing O-rings — standard C2 family hardware for secure, leak-resistant unloader connections
• Factory break-in oil — crankcase pre-filled to the correct operating level for first startup
• Oil sight glass and vented dipstick — at-a-glance oil level monitoring and simplified oil changes
• Mounting bolts — for secure F24 SAE J609a flange installation on compatible gas and diesel engines
• Operator’s manual and parts schematic — complete installation, startup, operating, and maintenance procedures with Annovi Reverberi part numbers for every serviceable component

Typical Applications

Where the XMV3G30DF24C2IF Delivers Best Results

• Fleet maintenance — washing buses, trucks, vans, and trailers where the XMV3G30DF24C2IF’s fixed 12% chemical draw rate delivers consistent detergent application across every vehicle in a standardized fleet washing program
• Construction equipment cleaning — excavators, loaders, bulldozers, and heavy machinery where consistent 3,000 PSI output and fixed-rate chemical application handle construction-site contamination on gas or diesel engine-powered portable cleaning systems
• Agricultural applications — tractors, harvesters, barns, and livestock enclosures where the XMV3G30DF24C2IF’s fixed-rate injection delivers predictable chemical concentration for standardized agricultural wash programs
• Municipal services — utility vehicles, sanitation trucks, and city maintenance equipment where repeatable chemical draw rate supports consistent municipal cleaning standards across a fleet of engine-driven pressure washers
• Commercial contractor wash rigs — mobile and job-site cleaning systems where the XMV3G30DF24C2IF’s factory-set 12% draw rate eliminates per-job injector adjustment for contractors running standardized cleaning programs across multiple accounts
• Industrial facilities — warehouses, factories, and industrial plants where the XMV3G30DF24C2IF’s forged brass durability and consistent fixed-rate chemical delivery support scheduled industrial surface maintenance programs

For operators who prefer a fully configured engine-driven system rather than a bare pump assembly, WSHPWR also carries complete gas and diesel engine pump packages ready to mount on a frame or trailer.

5-Year US Warranty, Full Rebuildability, and Wholesale Pricing

XMV Series Commercial Performance Backed by Domestic Support

The XMV3G30DF24C2IF is protected by Annovi Reverberi’s 5-year limited warranty through the US-based warranty and service network. Every internal wear component — precision-ground ceramic plungers, forged brass manifold seals and o-rings, hardened stainless valve seats and springs, Gymatic C2 unloader service parts, fixed-rate injector components, piston packing kits, and crankcase bearings — is stocked domestically through authorized distribution channels. Contractors, fleet operators, municipal maintenance teams, facility managers, resellers, and volume buyers are invited to contact the WSHPWR wholesale team for pricing on the XMV3G30DF24C2IF and the complete Annovi Reverberi pump and unloader assembly line. WSHPWR maintains one of the most complete Annovi Reverberi inventories available through any US web store — with thousands of products in stock and a continually expanding catalog.

9,000 Cleaning Units. 3,000 PSI. 3.0 GPM. F24 SAE J609a. Gymatic C2. Fixed 12% Injection Rate. Gas and Diesel Engine.

Italian Engineering. Direct Engine Drive. Factory-Approved C2 Assembly. Fixed-Rate Chemical Injection. US Warranty Coverage.

For contractors, fleet operators, municipal maintenance teams, agricultural operations, and industrial facility managers who need 3.0 GPM at 3,000 PSI on a gas or diesel engine platform — with F24 SAE J609a direct-drive flange for 1″ hollow keyway shaft engine coupling, factory-matched Gymatic C2 adjustable unloader with fixed-rate chemical injector preset at 12% draw, forged brass manifold construction for continuous-duty commercial service, and a completely rebuildable platform backed by a 5-year US warranty — the XMV3G30DF24C2IF delivers a purpose-engineered commercial cleaning solution from one of the global pressure pump industry’s most trusted manufacturers. Nine thousand cleaning units. Direct gas and diesel engine drive. Fixed 12% chemical injection. Five years of US warranty. A decade of service life.

Volume buyers can reach the WSHPWR wholesale team directly at wholesale@wshpwr.com to discuss pricing for quantity purchases across the complete Annovi Reverberi lineup.