RCV3G25E-F8M2I Electric Triplex Pump | 3.0 GPM 2500 PSI

RCV3G25E-F8M2I by Annovi Reverberi — RC Series Electric Triplex Plunger Pump with Mini-Matic M2I Unloader and Chemical Injector | 3.0 GPM | 2,500 PSI | Brass Manifold | 5/8″ Hollow Shaft | NEMA 56C F8 Electric Motor Mount | 3,400 RPM

The RCV3G25E-F8M2I by Annovi Reverberi is a professional-grade RC Series triplex ceramic plunger pump engineered for NEMA 56C electric motor-driven pressure washing systems requiring 3.0 GPM at 2,500 PSI with factory-integrated downstream chemical injection capability. Rated at 3.0 GPM and 2,500 PSI at 3,400 RPM, the RCV3G25E-F8M2I delivers 7,500 cleaning units — combining 3.0 GPM focused output with 2,500 PSI cleaning force for residential cleaning, vehicle washing, commercial storefronts, service bays, light industrial equipment, and agricultural applications — through a precision brass manifold, solid ceramic plungers, stainless steel valves, and an F8 NEMA 56C flange with 5/8″ hollow shaft for direct coupling to compatible electric motors.

The RCV3G25E-F8M2I carries the factory-installed Mini-Matic M2I integrated unloader assembly (AR20890) — delivering factory pre-set and field-adjustable pressure regulation with downstream chemical injection from a single factory-configured, factory-approved assembly. Built by Annovi Reverberi in Modena, Italy — with US-based operations, a domestic parts distribution network, and dedicated technical support — this pump arrives pre-filled with factory break-in oil, factory-tested, and ready for installation. Protected by a 5-year US limited warranty and built to be fully rebuilt rather than replaced, the RCV3G25E-F8M2I is a long-term investment capable of a decade of productive service life.

Factory-Matched and Approved — The RCV3G25E-F8M2I Complete Assembly Advantage

No Mismatches. No Guesswork. No Warranty Risk. Just Install and Run.

Every RCV3G25E-F8M2I ships as a factory-matched, factory-approved, and factory-installed complete pump and unloader assembly:

• Factory-matched M2I for 2,500 PSI — the Mini-Matic M2I integrated unloader (AR20890) and chemical injector are factory-calibrated for this pump’s 3.0 GPM / 2,500 PSI duty point. Pressure regulation and chemical draw characteristics are factory-set as a complete system.
• Factory-approved configuration — the complete assembly is Annovi Reverberi’s validated specification for this model. Operating with the factory-installed components maintains full 5-year warranty coverage.
• Factory-installed and tested — every RCV3G25E-F8M2I exits the manufacturing facility with the M2I assembly mounted, calibrated, and tested for flow, pressure, and leak-free operation before shipment.
• Eliminates mismatch returns — the factory-matched assembly eliminates incorrect unloader or injector specification — the most common source of pump system returns — before the pump leaves the box.
• Installation-ready — confirm NEMA 56C motor compatibility, mount via the F8 flange, connect system hoses, connect the detergent supply line to the injector port, and start. The RCV3G25E-F8M2I arrives engineered, assembled, and ready.

Decoding the RCV3G25E-F8M2I Model Number

What Every Segment of This Annovi Reverberi Pump Designation Tells You

• RCV — Pump series: RC Series triplex plunger pump — Annovi Reverberi’s compact commercial electric motor pump platform
• 3G — Flow rate: 3.0 GPM
• 25 — Maximum pressure: 2,500 PSI — 3.0 × 2,500 = 7,500 cleaning units
• E — Shaft type: Electric shaft — hollow shaft configuration for direct electric motor coupling per Annovi Reverberi model designation convention
• F8 — Flange type: NEMA 56C flange — direct coupling to NEMA 56C electric motors with 5/8″ hollow shaft (Annovi Reverberi part AR1584)
• M2 — Unloader family: Mini-Matic (AR20890) — factory-installed integrated unloader assembly with adjustable pressure regulation
• I — Chemical injector: Included — downstream soap injector factory-integrated into the Mini-Matic M2 assembly for two-mode wash capability

The RCV F8 Electric Family — 2,500 PSI vs 2,700 PSI

Both models share the same NEMA 56C electric platform, F8 flange, 5/8″ hollow shaft, and Mini-Matic M2I assembly at identical 3.0 GPM output:

• RCV3G25E-F8M2I (this model) — 2,500 PSI / 7,500 CU. Ideal for residential cleaning, vehicle washing, light commercial, and applications where 2,500 PSI delivers sufficient cleaning force.
• RCV3G27D-F8M2I — 2,700 PSI / 8,100 CU. Additional 200 PSI for more demanding commercial and industrial applications on the same NEMA 56C electric platform.

Key Specifications

RCV3G25E-F8M2I Technical Details at a Glance

• Flow Rate: 3.0 GPM (gallons per minute)
• Maximum Pressure: 2,500 PSI
• Cleaning Units: 7,500 (GPM × PSI)
• Operating Speed: 3,400 RPM
• Pump Type: RC Series triplex ceramic plunger pump — three-piston crankshaft-driven design for smooth, low-pulsation output
• Flange: F8 — NEMA 56C electric motor flange, 5/8″ hollow shaft (Annovi Reverberi part AR1584)
• Manifold Material: Brass — corrosion-resistant construction for sustained 2,500 PSI cycle integrity
• Plungers: Solid ceramic — exceptional wear resistance and thermal stability
• Valves: Stainless steel — precise sealing and long service life under continuous cycling
• Serviceability: Oil sight glass and vented dipstick for simplified routine maintenance
• Lubrication: Oil-bath crankcase with factory pre-filled break-in oil
• Unloader System: Mini-Matic M2I (AR20890) — factory pre-set and field-adjustable; integrated downstream chemical injector; factory-matched and factory-installed
• Connections: Banjo bolts and sealing O-rings — standard M2 family hardware supplied for secure, leak-resistant installation
• Chemical Injector: Included — downstream venturi injector factory-integrated into M2I Mini-Matic assembly
• Warranty: 5-year limited warranty — US-based coverage through Annovi Reverberi North America

What’s Included in the Box

A Complete, Factory-Configured RCV3G25E-F8M2I Assembly Ready for Installation

• Factory-matched Mini-Matic M2I integrated unloader with active chemical injector (AR20890) — factory pre-set and installed for the 3.0 GPM / 2,500 PSI operating point; field-adjustable; injector port ready for detergent supply line connection
• Banjo bolts and sealing O-rings — standard M2 family hardware for secure, leak-resistant unloader connections
• Factory break-in oil — crankcase pre-filled to the correct operating level for first startup
• Oil sight glass and vented dipstick — at-a-glance oil level monitoring and simplified oil changes
• Mounting hardware — for F8 NEMA 56C electric motor installation
• Operator’s manual — complete installation, startup, operating, and maintenance procedures including oil change intervals, chemical injector care, and winterization protocol
• Parts schematic — exploded-view diagram with Annovi Reverberi part numbers for every serviceable component

Mini-Matic M2I Unloader (AR20890) — Two-Mode Platform at 2,500 PSI

Factory Pre-Set. Field-Adjustable. Integrated Chemical Feed. Precise Pressure Control.

• Factory pre-set and field-adjustable pressure regulation — the AR20890 unloader on the RCV3G25E-F8M2I arrives calibrated for immediate 2,500 PSI operation with on-pump manual adjustment available for fine-tuning to match nozzle size, hose length, and surface requirements
• Bypass protection at trigger release — the M2I unloader diverts flow when the trigger gun is released on the RCV3G25E-F8M2I, protecting the pump from pressure spikes and allowing pause-and-resume operation without stress on internal components
• Integrated downstream injection — draws detergent or pre-soak solution when the operator switches to low-pressure application mode. No separate injector hardware required on the RCV3G25E-F8M2I.
• Two-mode workflow at 3.0 GPM / 2,500 PSI — chemical pre-soak breaks down contamination; full 2,500 PSI / 3.0 GPM rinse removes loosened material at 7,500 cleaning units. Switch between modes without changing tools.
• Compact manifold-integrated design — reduces fitting count, simplifies system layout, and supports clean OEM packaging in cabinet washers and compact electric skid builds using the RCV3G25E-F8M2I
• Injector maintenance — flush the M2I injector circuit with clean water after every detergent session to preserve long-term venturi function on the RCV3G25E-F8M2I

Typical Applications

Where the RCV3G25E-F8M2I Delivers Best Results

• Residential cleaning — cars, siding, decks, patios, driveways, and outdoor furniture where the RCV3G25E-F8M2I’s electric operation and factory-integrated two-mode capability deliver chemical pre-soak and rinse capability cleanly and quietly
• Vehicle washing — cars, motorcycles, boats, and recreational vehicles where 2,500 PSI output and integrated detergent injection handle surface contamination efficiently without the noise or exhaust of gas engine-driven alternatives
• Commercial cleaning — storefronts, sidewalks, service bays, outdoor seating areas, and general property maintenance where the RCV3G25E-F8M2I’s consistent electric motor output delivers professional results in occupied commercial environments
• Light industrial applications — machinery, equipment, and concrete surfaces in shops and light manufacturing environments where the RCV3G25E-F8M2I’s NEMA 56C electric platform supports clean indoor or enclosed facility operation
• Agricultural use — tractors, trailers, implements, and farm tools where the RCV3G25E-F8M2I’s two-mode capability handles chemical application and rinse from a single factory-matched electric pump assembly

5-Year US Warranty, Full Rebuildability, and Wholesale Pricing

RC Series Electric Performance Backed by Domestic Support

The RCV3G25E-F8M2I is protected by Annovi Reverberi’s 5-year limited warranty through the US-based warranty and service network. Every internal wear component — solid ceramic plungers, brass manifold seals and o-rings, stainless valve seats and springs, Mini-Matic M2I unloader service parts (AR20890), piston packing kits, and crankcase bearings — is stocked domestically through authorized distribution channels. Contractors, facility managers, fleet operators, OEM equipment builders, resellers, and volume buyers are invited to contact the WSHPWR wholesale team for pricing on the RCV3G25E-F8M2I and the complete Annovi Reverberi pump and unloader assembly line. WSHPWR maintains one of the most complete Annovi Reverberi inventories available through any US web store — with thousands of products in stock and a continually expanding catalog.

7,500 Cleaning Units. 2,500 PSI. 3.0 GPM. F8 NEMA 56C. Mini-Matic M2I. Two-Mode.

Italian Engineering. Compact Electric Platform. Factory-Approved Mini-Matic Assembly. US Warranty Coverage.

For residential users, commercial contractors, fleet operators, light industrial facilities, and OEM equipment builders who need 3.0 GPM at 2,500 PSI on a NEMA 56C electric motor platform — with F8 flange direct coupling for cabinet washers, skids, and compact systems, factory-matched Mini-Matic M2I integrated unloader with downstream chemical injection, and a completely rebuildable platform backed by a 5-year US warranty — the RCV3G25E-F8M2I delivers a purpose-engineered compact electric solution from one of the global pressure pump industry’s most trusted manufacturers. Seven thousand five hundred cleaning units. NEMA 56C direct couple. Two-mode chemical capability. Five years of US warranty. A decade of service life.

Volume buyers can reach the WSHPWR wholesale team directly at wholesale@wshpwr.com to discuss pricing for quantity purchases across the complete Annovi Reverberi lineup.