RCV3G25D-F7M2 Gas Triplex Pump | 3.0 GPM 2500 PSI

RCV3G25D-F7M2 by Annovi Reverberi — RC Series Triplex Plunger Pump with Mini-Matic M2 Unloader | 3.0 GPM | 2,500 PSI | Brass Manifold | 3/4″ Hollow Keyway Shaft | SAE J609a Gas Engine Drive | No Chemical Injector

The RCV3G25D-F7M2 by Annovi Reverberi is a professional-grade RC Series triplex ceramic plunger pump engineered for gas engine-driven pressure washing systems requiring 3.0 GPM at 2,500 PSI with clean high-pressure water delivery and no factory-installed chemical injector. Rated at 3.0 GPM and 2,500 PSI at 3,400 RPM, the RCV3G25D-F7M2 delivers 7,500 cleaning units — combining 3.0 GPM focused output with 2,500 PSI cleaning force for residential cleaning, vehicle washing, commercial storefronts, service bays, contractor rigs, and agricultural applications — through a precision-machined brass manifold, solid ceramic plungers, stainless steel valves, and an F7 SAE J609a direct-drive flange with 3/4″ hollow keyway shaft for direct coupling to compatible gasoline engines. As part of Annovi Reverberi’s pump and unloader assemblies stocked and supported by WSHPWR, the RCV3G25D-F7M2 arrives factory-configured and factory-tested, ready to deliver from the first startup.

The RCV3G25D-F7M2 carries the factory-installed Mini-Matic M2 adjustable unloader — delivering factory-set pressure regulation and safe bypass protection without a built-in injector. Straight 2,500 PSI water output makes the RCV3G25D-F7M2 the correct specification for operators who prefer external or downstream chemical systems, use a dedicated soft wash setup, or require straight high-pressure water delivery. Built by Annovi Reverberi in Modena, Italy — with US-based operations, a domestic parts distribution network, and dedicated technical support — this pump arrives pre-filled with factory break-in oil, factory-tested, and ready for installation. Protected by a 5-year US limited warranty and built to be fully rebuilt rather than replaced, the RCV3G25D-F7M2 is a long-term investment capable of a decade of productive service life.

Factory-Matched and Approved — The RCV3G25D-F7M2 Complete Assembly Advantage

No Mismatches. No Guesswork. No Warranty Risk. Just Install and Run.

Every RCV3G25D-F7M2 ships as a factory-matched, factory-approved, and factory-installed complete pump and unloader assembly:

• Factory-matched M2 for 2,500 PSI — the Mini-Matic M2 unloader is factory-calibrated for this pump’s 3.0 GPM / 2,500 PSI duty point, ensuring predictable pressure behavior and stable bypass response from first startup.
• Factory-approved configuration — the complete assembly is Annovi Reverberi’s validated specification for this model. Operating with the factory-installed components maintains full 5-year warranty coverage.
• Factory-installed and tested — every RCV3G25D-F7M2 exits the manufacturing facility with the M2 unloader mounted, calibrated, and tested for flow, pressure, and leak-free operation before shipment.
• Eliminates mismatch returns — the factory-matched assembly eliminates incorrect unloader specification — the most common source of pump system returns — before the pump leaves the box.
• Stress-free installation — mount to the engine, connect system hoses, add fuel, and start. The RCV3G25D-F7M2 arrives engineered, assembled, and ready.

Decoding the RCV3G25D-F7M2 Model Number

What Every Segment of This Annovi Reverberi Pump Designation Tells You

• RCV — Pump series: RC Series triplex plunger pump — Annovi Reverberi’s compact commercial gas engine pump platform
• 3G — Flow rate: 3.0 GPM
• 25 — Maximum pressure: 2,500 PSI — 3.0 × 2,500 = 7,500 cleaning units
• D — Shaft version: Direct Drive — 3,400 RPM operating speed for direct gas engine coupling per Annovi Reverberi model designation convention
• F7 — Flange type: SAE J609a direct-drive flange — close coupling to gas engines with a 3/4″ hollow keyway shaft (Annovi Reverberi part AR1579)
• M2 — Unloader family: Mini-Matic — factory-installed adjustable unloader with pressure regulation and safe bypass control
• No trailing I suffix — model terminates at M2, confirming straight 2,500 PSI water output without a factory-installed downstream chemical injector

RCV3G25D-F7M2 vs RCV3G25D-F7M2I — Choosing the Right Configuration

Both models share the same RC Series platform, F7 SAE J609a flange, 3/4″ hollow shaft, Mini-Matic M2 unloader, and 3.0 GPM / 2,500 PSI / 7,500 CU output. The injector is the only difference:

• RCV3G25D-F7M2 (this model) — No injector. Straight 2,500 PSI clean water output. Correct for external chemical systems, dedicated downstream injectors, soft wash setups, and operators who manage detergent delivery independently.
• RCV3G25D-F7M2I — Injector included. Factory-integrated downstream chemical injection for two-mode wash capability without additional hardware.

Key Specifications

RCV3G25D-F7M2 Technical Details at a Glance

• Flow Rate: 3.0 GPM (gallons per minute)
• Maximum Pressure: 2,500 PSI
• Cleaning Units: 7,500 (GPM × PSI)
• Operating Speed: 3,400 RPM
• Pump Type: RC Series triplex ceramic plunger pump — three-piston crankshaft-driven design for smooth, low-pulsation output
• Flange: F7 — SAE J609a direct-drive flange, 3/4″ hollow keyway shaft, gas engine compatible (Annovi Reverberi part AR1579)
• Manifold Material: Precision-machined brass — pressure stability and corrosion resistance
• Plungers: Solid ceramic — wear resistance and consistent sealing performance
• Valves: Stainless steel — long service life and consistent sealing under frequent pressure cycling
• Serviceability: Oil sight glass and vented dipstick for simplified routine maintenance
• Lubrication: Oil-bath crankcase with factory pre-filled break-in oil
• Unloader System: Mini-Matic M2 — factory-set and adjustable; pressure regulation and safe bypass control; factory-matched and factory-installed
• Connections: Banjo bolts and sealing O-rings — standard M2 family hardware supplied for secure, leak-resistant installation
• Chemical Injector: Not included — straight 2,500 PSI water output; chemical delivery managed externally
• Warranty: 5-year limited warranty — US-based coverage through Annovi Reverberi North America

What’s Included in the Box

A Complete, Factory-Configured RCV3G25D-F7M2 Assembly Ready for Installation

• Factory-matched Mini-Matic M2 adjustable unloader — installed and calibrated for the 3.0 GPM / 2,500 PSI operating point; no injector port on this variant
• Banjo bolts and sealing O-rings — standard M2 family hardware for secure, leak-resistant unloader connections
• Factory break-in oil — crankcase pre-filled to the correct operating level for first startup
• Oil sight glass and vented dipstick — at-a-glance oil level monitoring and simplified oil changes
• Mounting bolts — for secure F7 SAE J609a flange-to-engine installation
• Operator’s manual — complete installation, startup, operating, and maintenance procedures including oil change intervals and winterization protocol
• Parts schematic — exploded-view diagram with Annovi Reverberi part numbers for every serviceable component

Mini-Matic M2 Unloader — Clean Water Output at 2,500 PSI

Factory-Set. Adjustable. System Protection. No Injector.

• Factory-set and adjustable pressure regulation — the Mini-Matic M2 on the RCV3G25D-F7M2 arrives calibrated for 2,500 PSI operation with manual adjustment available for fine-tuning to match nozzle size and specific surface requirements
• Safe bypass at trigger release — the M2 unloader diverts flow when the trigger gun is released on the RCV3G25D-F7M2, protecting the pump and engine from over-pressure conditions during pause-and-resume cleaning cycles
• Pulse-reduced triplex output — the RC Series triplex architecture distributes mechanical load evenly, reducing vibration and hydraulic shock on hoses, spray guns, and fittings connected to the RCV3G25D-F7M2
• No factory-installed injector — straight 2,500 PSI water output. The RCV3G25D-F7M2 is the correct specification where external chemical systems, dedicated downstream injectors, or separate soft wash equipment manages detergent delivery independently from the pump.
• Simplified system design — without an on-pump injector, the RCV3G25D-F7M2 supports cleaner system integration for builds where chemical management is handled by separate purpose-built equipment

Typical Applications

Where the RCV3G25D-F7M2 Delivers Best Results

• Residential cleaning — cars, motorcycles, ATVs, siding, decks, patios, fences, and outdoor furniture where the RCV3G25D-F7M2’s straight 2,500 PSI water output pairs with an external chemical system for pre-soak and rinse capability
• Commercial maintenance — storefronts, walkways, loading areas, and service bays where consistent 3,400 RPM direct-drive output delivers professional results with chemical managed by a separate downstream system
• Industrial cleaning — machinery, tools, and concrete surfaces in shops and on job sites where the RCV3G25D-F7M2’s clean water output integrates with purpose-built chemical delivery equipment
• Agricultural use — tractors, trailers, implements, and farm equipment washdown where straight high-pressure water output on a portable gas engine rig handles surface contamination efficiently
• Contractor rigs and pump replacements — mobile wash trailers, skid units, and replacement installs where the RCV3G25D-F7M2’s compact F7 direct-drive design, factory-matched M2 assembly, and broad engine compatibility simplify integration

For operators who prefer a fully configured direct-drive system rather than a bare pump assembly, WSHPWR also carries complete gas and diesel engine pump packages ready to mount on a frame or trailer.

5-Year US Warranty, Full Rebuildability, and Wholesale Pricing

RC Series Performance Backed by Domestic Support

The RCV3G25D-F7M2 is protected by Annovi Reverberi’s 5-year limited warranty through the US-based warranty and service network. Every internal wear component — solid ceramic plungers, brass manifold seals and o-rings, stainless valve seats and springs, Mini-Matic M2 unloader service parts, piston packing kits, and crankcase bearings — is stocked domestically through authorized distribution channels. Contractors, fleet operators, facility managers, OEM equipment builders, resellers, and volume buyers are invited to contact the WSHPWR wholesale team for pricing on the RCV3G25D-F7M2 and the complete Annovi Reverberi pump and unloader assembly line. WSHPWR maintains one of the most complete Annovi Reverberi inventories available through any US web store — with thousands of products in stock and a continually expanding catalog.

7,500 Cleaning Units. 2,500 PSI. 3.0 GPM. F7 SAE J609a. Mini-Matic M2. No Injector.

Italian Engineering. Gas Engine Direct Drive. Factory-Approved M2 Assembly. US Warranty Coverage.

For residential users, commercial contractors, fleet operators, agricultural teams, and OEM equipment builders who need 3.0 GPM at 2,500 PSI on a gas engine platform — with F7 SAE J609a direct-drive flange for 3/4″ hollow keyway shaft engine coupling, factory-matched Mini-Matic M2 adjustable unloader for clean straight water output, external chemical management flexibility, and a completely rebuildable platform backed by a 5-year US warranty — the RCV3G25D-F7M2 delivers a purpose-engineered compact commercial solution from one of the global pressure pump industry’s most trusted manufacturers. Seven thousand five hundred cleaning units. Direct gas engine drive. No fixed injector. Five years of US warranty. A decade of service life.

Volume buyers can reach the WSHPWR wholesale team directly at wholesale@wshpwr.com to discuss pricing for quantity purchases across the complete Annovi Reverberi lineup.