SRMV24G28D-EZ 2.4 GPM 2800 PSI | EZ-start pump, 3/4″ hollow shaft

SRMV24G28D-EZ | Replaced by the SRMV25G32D-EZ, 2.5 GPM 3200 PSI

The SRMV24G28D-EZ (2.4 GPM at 2,800 PSI) has been superseded by Annovi Reverberi. Its direct replacement is the SRMV25G32D-EZ: the same SRMV axial pump design, the same 3/4 in. hollow shaft and EZ Start, with more output at 2.5 GPM and 3,200 PSI. It bolts on where the old pump came off.

If you are replacing this pump, order the SRMV25G32D-EZ. You get more flow and 400 PSI more pressure from the same mount.

What the Replacement Gives You

• 2.5 GPM at 3,200 PSI at 3400 RPM (engine speed)
• 3/4 in. hollow shaft that slides onto the engine crankshaft and bolts to the engine face
• Built-in unloader with a pressure-adjust knob, so no extra plumbing
• EZ Start for easier pulls on cold starts
• Sealed crankcase, factory-lubricated, with no oil changes needed

Will the Replacement Fit My Machine?

• Shaft: your engine has a 3/4 in. keyed horizontal shaft, the same as the old pump.
• Engine size: 196cc to 212cc (6.5 to 7 HP class).
• Outlet: check the outlet thread and quick connect against your hose fitting before installing.
• Hose and accessories: check that your hose, trigger and nozzles are rated for 3,200 PSI.

Not sure? Text a pump specialist at (505) 226-6061 with a photo of your old pump tag and engine and we’ll confirm the match.

SRMV24G28D-EZ Original Specifications

• Model: SRMV24G28D-EZ (superseded)
• Flow: 2.4 GPM
• Max Pressure: 2,800 PSI
• Speed: 3400 RPM
• Shaft: 3/4 in. hollow
• Pump Type: Axial, with built-in unloader and EZ Start
• Replacement: SRMV25G32D-EZ
• Brand: Annovi Reverberi

Shipping: Usually ships via UPS in 1 to 3 days.