MLSSSN18065 Sewer Nozzle 1/8 inch | 3-Hole Orifice 6.5

MLSSSN18065 Sewer Nozzle 1/8 inch | 3-Hole Orifice 6.5

Stainless 3-jet nozzle for 1–2 inch lines

• The AR MLSSSN18065 is a stainless steel 3-hole sewer nozzle designed for technicians
  who need confident propulsion, reliable flushing power, and predictable coverage in tight, small-diameter
  drain lines.
• Sized for 2.5–4.0 GPM at 2,000–4,000 PSI, it converts typical compact-jetter output
  into strong pull and even thrust to clear 1–2 inch runs.
• A 1/8-inch threaded connection mates securely with standard jetter hose fittings,
  preserving a leak-free seal and clean hydraulic handoff from machine to nozzle.
• Three #6.5 orifices are tuned to balance impact energy and volume so material moves
  efficiently without sacrificing control inside the line.

Jet Pattern & Hydraulic Performance

Even thrust, strong pull, and aggressive flushing

• Three rear-facing jets are drilled and aligned to generate even thrust and steady forward
  motion, keeping the hose tracking smoothly through bends.
• The rear-biased pattern maintains continuous wall contact, scrubbing biofilm,
  grease, fines, and mineral scale while sweeping loosened debris toward the access point.
• Compared with smaller-orifice variants, the #6.5 sizing passes more water for
  greater flushing capacity, helping push heavier sediment and fat deposits.
• Strong hydraulic pull captures loosened material in the jet stream, reducing the number of passes
  needed to restore flow.

Construction & Design

Solid stainless body for durability in real-world drains

• Machined from solid stainless steel, the MLSSSN18065 nozzle resists corrosion, abrasion,
  and chemical wear so jet angles and orifices stay precise after long service.
• A streamlined exterior minimizes drag and turbulence inside the pipe, allowing
  the tool to glide through elbows, tees, and junctions without snagging.
• The smooth body sheds scale and residue between jobs, helping the nozzle remain clean and
  predictable from cycle to cycle.
• Threads are engineered for high dimensional stability, resisting peening or deformation during
  frequent coupling and uncoupling in the field.

Applications & Recommended Use

Kitchen laterals, compact branches, and problem 1–2 inch lines

• Ideal for kitchen laterals, sink traps, laundry runs, and compact branch lines
  where grease, soap residue, fines, and scale restrict flow.
• Frequently deployed as an intermediate or finishing nozzle after a smaller
  penetration head has opened a severely blocked entry.
• Suited to residential maintenance and food-service drain cleaning,
  delivering enough power to reclaim lines without overspeed that might compromise inspection or coverage.
• In light commercial upkeep, its consistent thrust supports repeatable standard operating procedures
  across work orders and crews.

Operator Control & Field Behavior

Stable tracking in tight spaces and multi-bend runs

• The balanced MLSSSN18065 3-jet pattern provides a composed, low-whip feel in small pipes,
  protecting hose life and helping operators maintain precise positioning.
• Compact mass and modest profile help the assembly hold line through successive fittings
  and quickly re-establish pull after each change in direction.
• Rear-biased jets moderate splash-back compared to forward-jet tools, improving housekeeping at the
  work area and limiting re-contamination.
• Used within the recommended 2.5–4.0 GPM, 2,000–4,000 PSI window, the nozzle supports
  steady volumetric flushing without starving the line of water, maintaining prime
  and operator control on longer runs.

Maintenance & Best Practices

MLSSSN18065 Simple, moving-part-free care routine

• With no moving parts, daily care is minimal: flush the nozzle after each use
  and inspect the #6.5 orifices for mineral buildup or lodged grit.
• Clear deposits with a fine cleaning wire sized for the orifices so the flow
  path remains open and balanced.
• During shutdown, backflush the head, check for scale or hard-water deposits, and wipe sealing
  surfaces so the next start is clean and predictable.
• For variable or reclaimed water sources, pairing the jetter with an upstream inlet screen or
  suction filter protects both pump and nozzle, helping jets stay balanced over time.

Why Choose the AR MLSSSN18065

Compact power and repeatable performance in 1–2 inch drains

• Turns common compact-jetter output into practical cleaning results inside tight
  1–2 inch lines using a carefully sized #6.5 orifice set.
• Provides predictable propulsion and dependable materials, simplifying training,
  reducing changeovers, and serving as a go-to head for many small-line tasks.
• Stainless steel construction and precision-bored jets deliver the
  longevity and consistency expected from a professional-grade sewer nozzle.
• From routine maintenance to reclaiming flow in problem laterals, the MLSSSN18065 offers
  repeatable performance, a solid moving-part-free design, and durability tailored to real-world
  drains and tight spaces.