ML4052600004 Sewer Nozzle 3/4 Inch 60° | 4400 PSI

ML4052600004 Sewer Nozzle 3/4 Inch 60° | 4400 PSI

High-performance sewer jetting nozzle

Professional tool for municipal and industrial work

• The ML4052600004 SN G 3/4″ F 60 sewer nozzle is a professional-grade jetting tool designed
  for municipal, industrial, and commercial drain and sewer maintenance.
• Rated to 4,400 PSI, it is built for daily operation on high-pressure sewer jetting rigs that must
  clear long runs and repeat trouble spots without frequent tooling changes.
• A precisely engineered 60° spray angle combines strong forward cutting action with broad wall
  coverage, helping operators open blockages and restore full flow in fewer passes.
• The 3/4″ female threaded inlet allows direct connection to heavy-duty jetting hose assemblies
  used on trailer- and truck-mounted machines.
• Internal flow passages are designed to generate strong thrust, allowing the nozzle to pull itself through bends,
  transitions, and long horizontal runs with predictable behavior.

What this means for your rig

Faster, more thorough sewer and drain cleaning

• Upgrading to the SN G 3/4″ F 60 gives your crew a tool that can clean faster with fewer passes
  than basic fixed-orifice or fan-style nozzles.
• The 60° jet pattern provides enough forward impact to penetrate grease caps and heavy sludge while still
  sweeping the pipe wall for full-circumference cleaning.
• Balanced coverage helps eliminate the trade-off between cutting and flushing, making this nozzle suitable for mixed
  conditions where deposits vary along the run.
• High-efficiency thrust reduces the effort required to advance the hose, decreasing operator fatigue and improving
  control when working in long or partially plugged lines.
• For busy fleets, reduced jetting time per line translates directly to more completed jobs per shift and fewer
  callbacks to the same address.

Performance specs (quick reference)

Key operating data

• Model: ML4052600004 SN G 3/4″ F 60 sewer nozzle
• Maximum pressure: 4,400 PSI working pressure on compatible jetting rigs
• Spray angle: 60° pattern for combined penetration and wall coverage
• Inlet connection: 3/4″ female threaded inlet for heavy-duty hose ends
• Functional role: dual-action cleaning — forward drive plus 360° wall scrubbing
• Construction: high-strength, wear- and corrosion-resistant alloy body
• Intended line size: typically suited for 4″–8″ pipelines, depending on
  flow and site conditions

Build and materials ML4052600004

Heavy-duty construction for wastewater environments

• Built from premium stainless steel or equivalent hardened alloy to withstand abrasive solids, suspended grit, and
  chemical exposure common in sewer service.
• Precision-drilled jet orifices maintain designed flow and spray geometry over long service life,
  supporting repeatable cleaning performance.
• Internal hydraulic passages are optimized to maximize jet velocity, improving cutting capability and forward thrust
  without excessive pressure drop.
• Corrosion-resistant surface finish protects the body from wastewater, cleaning agents, and intermittent storage
  moisture.
• Compact, robust geometry resists damage from handling, line impacts, and repeated insertion through access points,
  manholes, and clean-outs.

Benefits and differentiators

Why choose the ML4052600004 SN G 3/4″ F 60

• Balanced cleaning action: the 60° angle delivers strong forward cutting while flushing the full
  pipe circumference to move loosened material downstream.
• Durable construction: corrosion- and wear-resistant materials support daily use on professional
  fleets without frequent replacement.
• High thrust output: engineered flow paths generate substantial pulling force for long runs and deep
  access from a single access point.
• Operator efficiency: improved cutting and flushing in one pass reduces labor time and pump runtime
  for each job.
• Versatile duty range: suitable for municipal, industrial, and commercial systems handling grease,
  sludge, sediment, and moderate scale.
• Fleet standardization: the 3/4″ inlet size fits common jetting hoses, simplifying nozzle
  inventories and rig changeovers.

Industries and applications

Where this ML4052600004 nozzle excels

• Municipal sewer maintenance: neighborhood branch lines, residential laterals, and main-line
  segments requiring routine cleaning.
• Industrial facilities: process drains, production area lines, and utility trenches where solids and
  residues accumulate.
• Commercial properties: restaurant, hotel, shopping center, and institutional drains subject to
  heavy grease and food waste loading.
• Construction and site work: pre- and post-pour pipe cleaning, storm drain maintenance, and
  temporary site drainage.
• Utility and public works: scheduled cleaning programs to keep high-traffic lines open and avoid
  emergency overflow events.
• Preventive maintenance: recurring service routes where the objective is to keep lines clear rather
  than react to full blockages.

Compatibility and fit ML4052600004

System requirements and sizing

• Designed for jetting equipment rated up to 4,400 PSI, with sufficient pump flow to support both
  cleaning and thrust requirements.
• The 3/4″ female inlet matches common heavy-duty jet hose ends used on trailer and truck rigs;
  adapters can be used when transitioning from other connection styles.
• Performs best in 4″–8″ pipe ranges where higher flow and greater thrust are available
  from the rig.
• Works in combination with filtration, reels, and recovery systems installed on professional sewer jetting trucks and
  skid units.
• Proper nozzle orifice sizing relative to pump GPM is essential to maintain pressure, maximize cleaning action, and
  protect the pump.

ML4052600004 Setup, use, and maintenance

Best practices for safe and reliable operation

• Inspect the nozzle body and jet orifices before each use; confirm that threads are clean and jets are free of
  obstructions or visible wear.
• Attach the nozzle securely to the 3/4″ hose fitting using appropriate thread sealant or sealing washers as
  required by your procedures.
• Verify that pump, hose, and fittings are all rated at or above the intended operating pressure.
• Bring the system up to pressure gradually once the nozzle is fully inside the pipe, avoiding sudden load steps on
  the pump and hose.
• Use steady feed and controlled retrieval to ensure full wall coverage while minimizing the risk of over-cleaning a
  single section.
• After each job, flush the nozzle with clean water to remove fines and chemicals, then inspect jet orifices for wear;
  replace as needed to maintain pattern and thrust.
• Store the nozzle in a dry, protected compartment to prevent accidental damage and preserve the working surfaces.

ML4052600004 Sewer Nozzle 3/4 Inch 60° | 4400 PSI

What’s included Package contents

• ML4052600004 SN G 3/4″ F 60 sewer nozzle, factory-configured for up to 4,400 PSI service.
• Basic installation, operation, and care guidelines supplied by the manufacturer for reference by jetting crews and
  maintenance staff.

Notes and tooling recommendations

Integrating into a complete jetting kit

• Always match nozzle sizing to pump flow to achieve stable working pressure and reliable pulling performance in the
  targeted pipe sizes.
• For hardened obstructions such as dense roots or concrete, use this nozzle alongside chain cutters or
  mechanical heads as part of a complete tooling package.
• Many fleets standardize the SN G 3/4″ F 60 as their primary medium-to-large line cleaning nozzle, backed by
  smaller nozzles for 2″–3″ laterals and specialty tools for extreme conditions.