5217 | 36 in Molded Zinc Lance, Extended Reach Spray Wand

5217 | 36 in Molded Zinc Lance, Extended Reach Spray Wand

The AR 5217 — 36 in Molded Zinc Lance | Extended-Reach Spray Wand is a 36-inch molded
zinc spray lance that balances extended reach with steady control for everyday high-pressure cleaning.
It delivers durable construction, a clean flow path, and predictable handling for vehicles, patios,
buildings, and equipment.

Designed to give operators practical reach, steady control, and day-in, day-out durability, the 5217
lets you stand comfortably back from splash while still placing the jet where it belongs—across tall
panels, along eaves, behind rails and guards, and down onto slabs and steps—so you cover more area with
fewer re-positionings. Molded zinc construction provides a solid, stable feel without excessive weight,
resisting bumps, vibration, and wet conditions, while the rigid tube tracks straight so the nozzle
meets the work at a square, repeatable angle and helps avoid streaks or banding on concrete, pavers,
siding, and equipment housings.

5217 Key Features & Benefits

• 36-inch extended reach: Allows you to sweep wider panels, keep the jet perpendicular on
  verticals, and guide rinse water where it can run off cleanly instead of swirling back into seams.
• Molded zinc construction: Provides a solid, stable feel without excess weight and stands
  up to bumps, vibration, and wet, real-world conditions.
• Rigid, straight geometry: Keeps the nozzle square to the surface, maintaining consistent
  standoff and reducing banding or streaks on concrete, pavers, siding, and equipment.
• Clean internal bore: Supports efficient flow so pump energy reaches the nozzle rather
  than dissipating in the wand, preserving strong, predictable spray performance.
• Compact inlet layout: Keeps the connection close to the lance’s axis for better balance
  and less leverage on upstream fittings.
• Confident, low-fatigue handling: Molded exterior provides a secure grip when wet, and
  balanced geometry minimizes micro-corrections during long passes.

Operation & Technique

Setup is deliberate but quick. Match the 5217 lance to your preferred couplings and adapters, confirm sealing
faces are clean, and seat each connection to a firm, even fit so joints remain dry at pressure. Route
the hose with gentle bends so you are not fighting upstream stiffness, then choose a tip that fits the
task—broad fans for rinsing and soap removal, narrower patterns for cutting into stubborn deposits, or
adjustable tips when you want to tune impact on the fly.

Begin each job with a small test patch to set standoff and pace, then move in steady, overlapping lanes
that blend cleanly. On delicate materials like aged paint, weathered wood, or soft joint sealants, open
distance and increase travel speed to soften impact; on heavier buildup, slow your traverse slightly and
let the water do more of the work. Around mechanicals, ease off at bearings, gaskets, and electrical
housings not intended for direct spray, using the reach to keep your hands out of the splash zone while
you square the jet to the surface.

On vehicles, the 5217 makes it easier to rinse rooflines, wheel housings, and tailgates without stepping
onto ladders or crowding bodywork. On buildings and facilities, it helps reach soffits, louvers,
screens, and stair stringers; on equipment, it lets you wash under rails, along frames, and behind
guards while keeping your stance stable.

Best Practices & Maintenance

• Safe changeovers: Always depressurize before swapping tips or accessories. Keep threads
  and quick-connect parts free of grit, and avoid using the lance as a lever to lift heavy attachments.
• After-detergent flushing: After using detergents, flush clean water through the assembly
  to clear residues that can cling to internal surfaces, then wipe the exterior so inspection is fast
  and any nicks are visible.
• Proper storage: Store the wand straight on a rack where it is not pinched or under
  weight to prevent distortion and joint stress.
• Leak and pattern checks: If a joint weeps at startup, re-seat with clean sealing faces.
  If the stream wanders, inspect the tip for debris and verify that your standoff and angle keep the jet
  aligned with the target.
• Standardized training: Using a consistent 36-inch molded zinc lance across bays and
  trucks simplifies training, keeps handling familiar from station to station, and supports tidy,
  modular builds with fewer extra adapters.

5217 | 36 in Molded Zinc Lance, Extended Reach Spray Wand

Whether your day involves freshening patios, rinsing vehicle fleets, clearing shop slabs, or reaching
architectural details that a shorter wand misses, the AR 5217 delivers the reach, stability,
and durable construction that make everyday cleaning faster, neater, and more predictable—so you finish
with uniform results and fewer interruptions.