5202 | 36 in Vented Zinc Lance, Extended Reach Spray Wand

5202 | 36 in Vented Zinc Lance, Extended Reach Spray Wand

The AR 5202 — 36 in Vented Zinc Lance | Extended-Reach Spray Wand is a heavy-duty spray wand
built for operators who want dependable reach, stable flow, and long service life in real-world
cleaning. This 36-inch vented zinc lance delivers steady pressure, added reach, and balanced control
for vehicles, siding, decks, and broad outdoor surfaces, while its durable zinc body integrates cleanly
with standard fittings for quick, leak-free setups.

Its zinc alloy body provides a solid, corrosion-resistant structure that stands up to wet,
detergent-rich environments, while the vented design helps regulate internal flow and relieve trapped
air so pressure stays smooth and consistent as you move from wide rinses to focused cutting passes. At
36 inches, the lance lets you place the jet exactly where it needs to go—across tall vehicle panels, up
along siding and soffits, down onto decks and slabs, and behind rails and guards—so you cover more
surface with fewer re-positionings and maintain a comfortable standoff that keeps hands out of splash
and heat.

5202 Key Features & Benefits

• 36-inch extended reach: Allows precise jet placement on tall panels, soffits, decks, and
  hard-to-access surfaces while keeping the operator at a safe, comfortable distance.
• Vented zinc construction: Zinc alloy body resists corrosion in wet, chemical, and outdoor
  conditions, and the vented pathway promotes smooth pressure transitions as you feather the trigger
  or change spray angles.
• Rigid, straight geometry: Tracks true so the nozzle meets the surface squarely, providing
  even impact and reduced ricochet while minimizing banding and streaking on concrete, pavers, and
  vertical cladding.
• Smooth internal bore: Supports efficient water delivery so pump energy reaches the tip
  rather than dissipating in the wand, helping maintain consistent cleaning performance.
• Standard fitting compatibility: Pairs easily with common quick-connect and threaded
  couplings for fast integration into existing spray systems.
• Balanced handling: Lance length and mass are tuned to reduce micro-corrections that fatigue
  hands and forearms, and molded exterior grip (where equipped) offers a secure hold when wet.

Operation & Control

Day-to-day handling is deliberate but simple. Match the lance to your preferred couplings—quick-connect
or threaded—verify sealing faces are clean, and bring each joint to a firm, even seat so the union
stays dry under pressure. Route the hose with gentle bends so the inlet is not forced to absorb bending
loads, then choose a nozzle appropriate to the task: broad fan patterns for fast soap removal and
general rinsing, narrower patterns when you need to lift stubborn deposits, or an adjustable tip when
you want to tune impact on the fly.

Begin with a small test patch to set standoff and pace, then work in steady, overlapping lanes that
blend cleanly. On delicate materials such as weathered wood, aging paint, elastomeric sealants, or soft
masonry, open distance and increase travel speed to soften impact. For heavier buildup, slow your
traverse so the water has time to do the work without over-scrubbing with the tip.

Around mechanicals, use the extra reach to square the jet while avoiding direct spray at bearings,
gaskets, vents, and electrical housings that are not intended for impact. In workflows where you switch
tools often, the 5202 plays well with foam cannons, detergent injectors, and surface-cleaner hookups;
its standard interfaces make changeovers quick, while the vented channel helps the line recover to a
stable pattern as you transition back to high-pressure rinse.

Durability & Construction

The AR 5202 is built for long-term reliability in demanding environments. The zinc body resists
oxidation and chemical wear so the wand keeps a clean feel through routine rinses and daily cycles, and
precision-machined threads support repeatable, leak-resistant joints even with frequent assembly and
disassembly. The balanced 36-inch length reduces strain during long passes on façades, trailers, shop
floors, and equipment frames.

For shops and fleets standardizing gear, a consistent 36-inch vented zinc lance across bays and trucks
simplifies training, spares, and handling feel from station to station, and supports tidy, modular
builds that minimize extra adapters and leak paths.

Best Practices & Maintenance

• Safe changeovers: Depressurize the system before changing nozzles or accessories, and keep
  threads and quick-connect components free of grit.
• Chemical flushing: After chemical use, flush clean water through the lance to purge residues
  that can cling to internal surfaces.
• Exterior care: Wipe the exterior to remove film so inspections are fast and potential wear
  points are easy to spot early.
• Proper storage: Store the wand straight on a rack where it is not pinched or under weight to
  prevent distortion and joint stress.
• Leak checks: If a joint weeps at startup, de-pressurize, re-seat with clean sealing faces, and
  return to pressure—most nuisance drips resolve with basic thread hygiene and even torque.
• Correct handling: Avoid using the 5202 lance as a lever to lift heavy attachments so threads,
  fittings, and seals remain in top condition.

5202 | 36 in Vented Zinc Lance, Extended Reach Spray Wand

Applications

Whether you are washing vehicles and trailers, refreshing siding and fences, clearing patios and
walkways, or maintaining equipment and outdoor facilities, the AR 5202 delivers the reach,
stability, and vented flow control that make high-pressure cleaning faster, cleaner, and more
predictable—so you finish with uniform results and fewer interruptions shift after shift.