AL-QC1/4PIVOT | 1/4 in Quick-Connect Coupling, 3-Position Pivot

AL-QC1/4PIVOT

The AR AL-QC1/4PIVOT — 1/4″ Quick-Connect Coupling with 3-Position Pivot is a premium,
multi-position fitting engineered by Annovi Reverberi to enhance versatility, maneuverability, and comfort
in high-pressure cleaning systems. Featuring a three-position pivot design, this coupler lets users adjust
the spray gun or hose connection angle to optimize ergonomics and accessibility in tight or awkward
cleaning environments. Built for professional and heavy-duty use, it delivers the strength, flexibility,
and leak-free sealing required to maintain high performance under demanding operating conditions.

Construction & Materials

The AL-QC1/4PIVOT is constructed from durable, corrosion-resistant metals such as nickel-plated brass and
stainless-steel components (depending on configuration), combined with robust internal seals designed to
withstand:

• High operating pressure and frequent cycling.
• Continuous water and detergent exposure.
• Outdoor conditions, temperature swings, and vibration.

All components are precision-machined to tight tolerances so the coupler seats cleanly with industry-standard
1/4″ male and female quick-connect fittings, ensuring a secure, leak-free interface across a wide
range of pressure washer systems.

Three-Position Pivot Design

At the heart of the AL-QC1/4PIVOT is its three-position pivot joint, engineered to rotate
smoothly between fixed positions—typically straight, 45°, and 90°. This allows operators to:

• Align the hose or gun naturally with the cleaning surface.
• Reduce bending, kinking, and restrictive hose loops.
• Improve reach in confined spaces under vehicles, around machinery, or along vertical walls.

The reinforced pivot joint is designed to remain tight and stable over time, resisting wobble and maintaining
sealing integrity even after thousands of directional adjustments.

Quick-Connect Operation

The coupler uses a standard 1/4″ quick-connect interface for effortless, one-handed
operation:

• Insert a compatible male plug until it snaps into place, forming an immediate watertight seal.
• To disconnect, pull back on the sleeve to release the plug—no tools required.

Internal locking balls and the precision-sealed sleeve mechanism provide positive engagement and smooth
transitions between attachments, allowing fast accessory changes without depressurizing the system.

Hydraulic Performance & Sealing

Internally, the AL-QC1/4PIVOT is designed for optimal flow and pressure retention:

• Polished bore and flow channels minimize turbulence and pressure drop.
• Reinforced O-rings and seals maintain a leak-free connection in all pivot positions.
• Heavy-duty construction keeps the joint rigid under load, preventing seepage and micro-movement.

This stable hydraulic path preserves full pump output at the nozzle, supporting consistent spray patterns
and efficient cleaning on every pass.

Ergonomics & User Benefits

By allowing the hose or gun to pivot instead of forcing the operator to twist their wrist or body,
the AL-QC1/4PIVOT improves overall ergonomics:

• Reduces wrist and forearm strain during long work sessions.
• Helps prevent hose twisting, kinking, and pressure interruptions.
• Improves control of spray patterns in tight or awkward spaces.

These advantages translate into higher productivity, less fatigue, and reduced wear on hoses and fittings.

Quality, Maintenance & Service Life

Each AL-QC1/4PIVOT coupling is manufactured under Annovi Reverberi’s strict quality standards and is tested
for sealing integrity, dimensional accuracy, and pressure endurance. To keep it performing at its best:

• Inspect and clean the pivot joint periodically to remove dirt and debris.
• Apply a small amount of compatible, non-reactive lubricant to the seals as needed.
• Check the quick-connect interface and O-rings during routine system maintenance.

The corrosion-resistant body materials require no protective coatings and retain their performance even in
harsh or wet environments, offering long service life in professional duty.

Applications

The AL-QC1/4PIVOT is an excellent choice for:

• Professional pressure-washing contractors.
• Fleet maintenance and automotive detailing.
• Industrial and facility wash stations.
• Homeowners seeking advanced ergonomics and flexibility.

Anywhere that straight-line hose connections are cumbersome, this coupler’s pivoting design simplifies
positioning while maintaining steady water flow and pressure.

AL-QC1/4PIVOT Key Features

• 1/4″ quick-connect coupling with three-position pivot.
• Compatible with standard 1/4″ male and female quick-connect fittings.
• Corrosion-resistant construction (nickel-plated brass / stainless components).
• Polished internal bore for high flow and low pressure drop.
• Heavy-duty O-rings and seals for leak-free operation at all angles.
• Ergonomic pivot design reduces hose kinking and operator fatigue.
• Built for professional, high-PSI pressure washer systems.

Combining quick-connect efficiency with adjustable flexibility, the
AR AL-QC1/4PIVOT 1/4″ Quick-Connect Coupling delivers reliable, leak-free performance
while improving handling, comfort, and mobility in any high-pressure cleaning system where precision and
maneuverability are essential.