TPR400-065 Rotating Nozzle | 5800 PSI Extreme Turbo

TPR400-065 Rotating Nozzle | 5800 PSI Extreme Turbo

The Annovi Reverberi TPR400-065 Rotary Turbo Nozzle is engineered for high-flow, high-pressure applications where aggressive rotary action is required to clear tough contamination. With a 6.5 orifice, a solid 1/4″ F inlet, and a maximum operating pressure of 5,800 PSI, this nozzle delivers a high-velocity rotating jet capable of removing heavy buildup, thick grime, and stubborn residues from concrete, steel, masonry, and industrial surfaces. It’s ideal for crews using larger pumps in demanding, continuous-duty work.

Part of the robust TPR400 high-pressure rotary family, the TPR400-065 incorporates a brass body, ceramic orifice, and a precision rotor system to maintain consistent performance over extended use. With a 212°F temperature rating, it’s equally at home in hot-water and cold-water systems, making it versatile for degreasing, sanitation, and restoration in industrial and municipal environments.

Key Specifications

• Model: TPR400-065
• Nozzle Size: 6.5
• Max Pressure: 5,800 PSI
• Max Temperature: 212°F
• Inlet: 1/4″ F
• Pattern: Approx. 20° rotary cone
• Body: Brass
• Orifice: Ceramic

Performance & Design Highlights

• Large 6.5 orifice: Moves serious water volume for rapid cleaning of big areas and heavy contamination.
• Rotary 0° jet: Concentrated, spinning stream delivers deep, chisel-like cutting action.
• 400 bar-rated construction: Designed to withstand very high operating pressures.
• Hot-water compatible: 212°F rating for degreasing and sanitation tasks.
• Professional durability: Built to run hard in contractor, plant, and municipal applications.

Typical Applications

• Large concrete & pavement: Industrial yards, staging areas, big pads, and terminals.
• Heavy industrial cleaning: Mills, plants, refineries, waste handling.
• Fleet & equipment: Cleaning severe road film, grease, and packed material off heavy equipment.
• Surface prep: Removing loose coatings and heavy contamination before blasting or recoating.

Sizing & Compatibility

• Match to high-GPM, high-PSI washers and pumps.
• Do not exceed 5,800 PSI or 212°F.
• Connects to standard 1/4″ F spray guns, lances, and adapters.

Maintenance

• Flush the system before use.
• Start on a robust surface so rotor can spool up.
• Vary standoff distance to fine-tune aggressiveness.
• Monitor spray quality and rotation; service or replace if degraded.