RCA3G25E-F8M2I | Triplex Pump, 3.0 GPM 2500 PSI, F8 56C, M2 Unloader

RCA3G25E-F8M2I by Annovi Reverberi — Electric Triplex Plunger Pump with Mini-Matic M2I Unloader and Chemical Injector | 3.0 GPM | 2,500 PSI | Brass Manifold | 5/8″ Hollow Shaft | NEMA 56C F8 Electric Motor Mount | 1,750 RPM

The RCA3G25E-F8M2I by Annovi Reverberi is a professional-grade electric triplex ceramic plunger pump engineered for NEMA 56C electric motor-driven pressure washing systems requiring 3.0 GPM at 2,500 PSI with factory-integrated downstream chemical injection capability. Rated at 3.0 GPM and 2,500 PSI at 1,750 RPM, the RCA3G25E-F8M2I delivers 7,500 cleaning units — combining 3.0 GPM high-volume output with 2,500 PSI cleaning force for residential cleaning, commercial fleet washing, equipment washdown, agricultural machinery, and industrial wash areas — through a precision-machined brass manifold, solid ceramic plungers, stainless steel valves, heavy-duty bearings, and an F8 NEMA 56C flange with 5/8″ hollow shaft for direct coupling to compatible electric motors. As part of Annovi Reverberi’s pump and unloader assemblies stocked and supported by WSHPWR, the RCA3G25E-F8M2I arrives factory-configured and factory-tested, ready to deliver from the first startup.

The RCA3G25E-F8M2I carries the factory-installed Mini-Matic M2I integrated unloader and chemical injector — delivering precise pressure regulation with downstream chemical injection from a single factory-configured, factory-approved assembly. Operating at 1,750 RPM, this pump delivers the thermal efficiency and extended component life of low-speed electric operation — running cooler and quieter than high-speed alternatives while delivering 2,500 PSI cleaning output. Built by Annovi Reverberi in Modena, Italy — with US-based operations, a domestic parts distribution network, and dedicated technical support — this pump arrives pre-filled with factory break-in oil, factory-tested, and ready for installation. Protected by a 5-year US limited warranty and built to be fully rebuilt rather than replaced, the RCA3G25E-F8M2I is a long-term investment capable of a decade of productive service life.

Factory-Matched and Approved — The RCA3G25E-F8M2I Complete Assembly Advantage

No Mismatches. No Guesswork. No Warranty Risk. Just Install and Run.

Every RCA3G25E-F8M2I ships as a factory-matched, factory-approved, and factory-installed complete pump and unloader assembly:

• Factory-matched M2I for 2,500 PSI — the Mini-Matic M2I integrated unloader and chemical injector are factory-calibrated for this pump’s 3.0 GPM / 2,500 PSI duty point. Pressure regulation and chemical draw characteristics are factory-set as a complete system.
• Factory-approved configuration — the complete assembly is Annovi Reverberi’s validated specification for this model. Operating with the factory-installed components maintains full 5-year warranty coverage.
• Factory-installed and tested — every RCA3G25E-F8M2I exits the manufacturing facility with the M2I assembly mounted, calibrated, and tested for flow, pressure, and leak-free operation before shipment.
• Eliminates mismatch returns — the factory-matched assembly eliminates incorrect unloader or injector specification — the most common source of pump system returns — before the pump leaves the box.
• Installation-ready — confirm NEMA 56C motor compatibility, mount via the F8 flange, connect system hoses, connect the detergent supply line to the injector port, and start. The RCA3G25E-F8M2I arrives engineered, assembled, and ready.

Decoding the RCA3G25E-F8M2I Model Number

What Every Segment of This Annovi Reverberi Pump Designation Tells You

• RCA — Pump series: Annovi Reverberi electric triplex plunger pump platform
• 3G — Flow rate: 3.0 GPM
• 25 — Maximum pressure: 2,500 PSI — 3.0 × 2,500 = 7,500 cleaning units
• E — Shaft type: Electric shaft — hollow shaft configuration for direct electric motor coupling per Annovi Reverberi model designation convention
• F8 — Flange type: NEMA 56C flange — direct coupling to NEMA 56C electric motors with 5/8″ hollow shaft (Annovi Reverberi part AR1584)
• M2 — Unloader family: Mini-Matic — factory-installed integrated unloader assembly with adjustable pressure regulation
• I — Chemical injector: Included — downstream soap injector factory-integrated into the Mini-Matic M2 assembly for chemical application and rinse capability

RCA3G F8M2I Family — 1,800 PSI vs 2,500 PSI

Both models share the same electric platform, F8 NEMA 56C flange, 5/8″ hollow shaft, Mini-Matic M2I assembly, 3.0 GPM output, and 1,750 RPM low-speed operation:

• RCA3G25E-F8M2I (this model) — 2,500 PSI / 7,500 CU. Higher cleaning impact for commercial, fleet, and industrial applications requiring greater pressure force.
• RCA3G18E-F8M2I — 1,800 PSI / 5,400 CU. Lower pressure for residential cleaning, surface-sensitive applications, and everyday washdown where controlled impact is preferred.

Key Specifications

RCA3G25E-F8M2I Technical Details at a Glance

• Flow Rate: 3.0 GPM (gallons per minute)
• Maximum Pressure: 2,500 PSI
• Cleaning Units: 7,500 (GPM × PSI)
• Operating Speed: 1,750 RPM — low-speed electric motor platform for reduced heat, vibration, and component wear
• Pump Type: Triplex ceramic plunger pump — smooth, low-pulsation output
• Flange: F8 — NEMA 56C electric motor flange, 5/8″ hollow shaft (Annovi Reverberi part AR1584)
• Manifold Material: Precision-machined brass — corrosion resistance and pressure stability
• Plungers: Solid ceramic — reduced friction, heat, and wear on seals
• Valves: Stainless steel — reliable sealing and efficient flow under continuous cycling
• Bearings: Heavy-duty — long service life under frequent use
• Serviceability: Oil sight glass and vented dipstick for simplified routine maintenance
• Lubrication: Oil-bath crankcase with factory pre-filled break-in oil
• Unloader System: Mini-Matic M2I — factory-set; integrated downstream chemical injector; factory-matched and factory-installed
• Connections: Banjo bolts and sealing O-rings — standard M2 family hardware supplied for secure, leak-resistant installation
• Chemical Injector: Included — downstream venturi injector factory-integrated into M2I Mini-Matic assembly
• Warranty: 5-year limited warranty — US-based coverage through Annovi Reverberi North America

What’s Included in the Box

A Complete, Factory-Configured RCA3G25E-F8M2I Assembly Ready for Installation

• Factory-matched Mini-Matic M2I integrated unloader with active chemical injector — factory-set and installed for the 3.0 GPM / 2,500 PSI operating point; injector port ready for detergent supply line connection
• Banjo bolts and sealing O-rings — standard M2 family hardware for secure, leak-resistant unloader connections
• Factory break-in oil — crankcase pre-filled to the correct operating level for first startup
• Oil sight glass and vented dipstick — at-a-glance oil level monitoring and simplified oil changes
• Mounting hardware — for F8 NEMA 56C electric motor installation
• Operator’s manual and parts breakdown — complete installation, startup, operating, and maintenance procedures with Annovi Reverberi part numbers for every serviceable component

1,750 RPM Low-Speed Electric Operation at 2,500 PSI

Commercial-Grade Output. Low Noise. Extended Component Life.

• 1,750 RPM at 2,500 PSI — the RCA3G25E-F8M2I delivers commercial-grade cleaning output at low operating speed, combining the thermal and wear advantages of 1,750 RPM electric operation with the higher pressure force required for fleet washing, equipment cleaning, and industrial washdown applications
• Reduced heat and vibration at operating speed — lower RPM reduces heat buildup, vibration, and cumulative wear on ceramic plungers, seals, and heavy-duty bearings across extended commercial cleaning cycles on the RCA3G25E-F8M2I
• Quieter operation for enclosed environments — 1,750 RPM electric operation produces substantially lower noise than high-speed alternatives, suited for indoor wash bays, service facilities, and enclosed industrial environments on the RCA3G25E-F8M2I
• Consistent voltage-regulated output — electric motor power delivers stable, consistent operating speed unaffected by fuel quality or ambient temperature, ensuring predictable 3.0 GPM / 2,500 PSI performance across all operating conditions

Mini-Matic M2I Unloader — Chemical Application and Rinse at 2,500 PSI

Factory-Set. Integrated Chemical Feed. Pressure Safety. Electric Platform Ready.

• Precise factory-set pressure regulation — the Mini-Matic M2I on the RCA3G25E-F8M2I arrives calibrated for immediate 2,500 PSI operation, preventing over-pressurization and protecting pump components during continuous commercial use
• Integrated downstream injection — draws detergent or pre-soak solution when the operator switches to low-pressure application mode. No separate injector hardware required on the RCA3G25E-F8M2I.
• Chemical application and rinse at 3.0 GPM / 2,500 PSI — chemical pre-soak breaks down contamination; full 2,500 PSI / 3.0 GPM rinse removes loosened material at 7,500 cleaning units. Switch between application and rinse without changing tools.
• Safe bypass protection — the M2I unloader automatically reduces pump strain at trigger release on the RCA3G25E-F8M2I, improving operational safety and extending long-term pump longevity during stop-and-go cleaning cycles
• Injector maintenance — flush the M2I injector circuit with clean water after every detergent session to preserve long-term venturi function on the RCA3G25E-F8M2I

Typical Applications

Where the RCA3G25E-F8M2I Delivers Best Results

• Residential cleaning — decks, patios, siding, and vehicles where the RCA3G25E-F8M2I’s 3.0 GPM output and quiet 1,750 RPM electric operation deliver thorough cleaning with factory-integrated chemical capability
• Commercial fleet washing and car wash stations — 3.0 GPM / 2,500 PSI output and integrated chemical injection handle fleet vehicle surfaces efficiently in electric wash bay environments
• Industrial and agricultural equipment washdown — machinery, warehouse wash areas, and agricultural equipment where the RCA3G25E-F8M2I’s low-noise electric operation and 2,500 PSI output support clean indoor and outdoor industrial cleaning programs
• OEM direct-fit replacement for 56C face electric motor pumps — the RCA3G25E-F8M2I’s F8 NEMA 56C interface provides direct-fit replacement compatibility for existing electric pressure washer systems requiring 3.0 GPM / 2,500 PSI output

5-Year US Warranty, Full Rebuildability, and Wholesale Pricing

Electric Triplex Performance Backed by Domestic Support

The RCA3G25E-F8M2I is protected by Annovi Reverberi’s 5-year limited warranty through the US-based warranty and service network. Every internal wear component — solid ceramic plungers, brass manifold seals and o-rings, stainless valve seats and springs, Mini-Matic M2I unloader service parts, piston packing kits, and crankcase bearings — is stocked domestically through authorized distribution channels. Contractors, facility managers, fleet operators, OEM equipment builders, resellers, and volume buyers are invited to contact the WSHPWR wholesale team for pricing on the RCA3G25E-F8M2I and the complete Annovi Reverberi pump and unloader assembly line. WSHPWR maintains one of the most complete Annovi Reverberi inventories available through any US web store — with thousands of products in stock and a continually expanding catalog.

7,500 Cleaning Units. 2,500 PSI. 3.0 GPM. F8 NEMA 56C. 1,750 RPM. Mini-Matic M2I. Integrated Chemical Injection.

Italian Engineering. Low-Speed Electric Platform. Factory-Approved Mini-Matic Assembly. US Warranty Coverage.

For residential users, commercial operators, fleet managers, agricultural teams, and OEM equipment builders who need 3.0 GPM at 2,500 PSI on a NEMA 56C electric motor platform — with F8 flange direct coupling, 1,750 RPM low-speed operation for extended component life and quiet performance, factory-matched Mini-Matic M2I integrated unloader with downstream chemical injection, and a completely rebuildable platform backed by a 5-year US warranty — the RCA3G25E-F8M2I delivers a purpose-engineered electric cleaning solution from one of the global pressure pump industry’s most trusted manufacturers. Seven thousand five hundred cleaning units. NEMA 56C direct couple. Integrated chemical injection. Five years of US warranty. A decade of service life.

Volume buyers can reach the WSHPWR wholesale team directly at wholesale@wshpwr.com to discuss pricing for quantity purchases across the complete Annovi Reverberi lineup.