RSV25G25D-F25CH 2.5 GPM 2500 PSI | 3400 RPM CAMBELL F25CH pump

RSV25G25D-F25CH by Annovi Reverberi — RSV Series Triplex Plunger Pump with Integrated Unloader | 2.5 GPM | 2,500 PSI | Forged Brass Manifold | Bronze Connecting Rods | Campbell Hausfeld Replacement | Fixed 12% Injector | 6,250 Cleaning Units

The RSV25G25D-F25CH by Annovi Reverberi is an RSV Series triplex plunger pump with integrated unloader delivering 2.5 GPM at 2,500 PSI — engineered for direct gas engine coupling via the F25 3/4″ Shaft interface. Rated at 2.5 GPM and 2,500 PSI, the RSV25G25D-F25CH delivers 6,250 cleaning units — through a forged brass manifold, solid ceramic plungers, bronze connecting rods, stainless steel valves, an integrated adjustable unloader, and a fixed 12% chemical injector in one factory-assembled pump body. Protected by a 5-year US limited warranty and built to be fully rebuilt rather than replaced. As part of Annovi Reverberi’s pump and unloader assemblies stocked and supported by WSHPWR, the RSV25G25D-F25CH is the complete integrated triplex pump solution for gas engine-powered pressure washing at 2,500 PSI.

Campbell Hausfeld Replacement — AR North America Quality Upgrade

Direct F25 3/4″ Shaft Replacement. Genuine AR Triplex Construction. 5-Year US Warranty.

The RSV25G25D-F25CH is Annovi Reverberi’s direct replacement specification for compatible Campbell Hausfeld pressure washers using the F25 3/4″ shaft platform. The identical shaft interface and mounting geometry make this a bolt-on replacement — same hole pattern, same shaft size, same outlet position. What changes is everything inside: forged brass manifold replaces cast alternatives, bronze connecting rods deliver sustained duty performance, and the 5-year US limited warranty backed by AR North America’s nationwide service network replaces the limited support available on the original Campbell Hausfeld platform. This is a genuine upgrade, not just a replacement.

Fixed 12% Chemical Injector — Integrated. Detergent Hose and Filter Sold Separately.

Injector Ready. Complete the System with the DETHOSE-FIL6X.

The RSV25G25D-F25CH ships with a fixed 12% chemical injector integrated directly into the pump body. The injector automatically draws detergent when the downstream nozzle creates the correct pressure differential — no separate injector tee, no compatibility guesswork. What is not included: the detergent hose and filter. To complete the chemical delivery system, the DETHOSE-FIL6X 6ft Detergent Hose with Red Filter is the correct accessory — a 6-foot red chemical suction hose with inline filter sized for the RSV25G25D-F25CH injector port. Keeps particulate out of the injector, extends injector service life, and gives the operator reach from a stationary detergent container on contractor rigs and wash stations.

Engine Compatibility — What Drives the RSV25G25D-F25CH

F25 SAE J609a. 3/4″ Hollow Shaft. 4.5 EBHP Minimum. Direct Bolt-On to Common Small-Frame Gas Engines.

• Harbor Freight Predator 224cc / 6.6 HP Max Performance — the preferred Predator pairing. 3/4″ keyway shaft. Direct replacement for Honda GX200 and Briggs & Stratton XR950.
• Harbor Freight Predator 212cc / 6.5 HP — 3/4″ keyway shaft. Compatible for residential and contractor builds.
• Honda GX200 / 5.5 HP — 196cc, 3/4″ keyway shaft. Direct-mount compatible with the RSV25G25D-F25CH F25 flange.
• Briggs & Stratton XR950 — 3/4″ keyway shaft. Compatible for residential builds.
• Kohler CH270 / Command series — 3/4″ keyway shaft. Compatible for applicable small-frame configurations.

Key Specifications

RSV25G25D-F25CH Technical Details at a Glance

• Flow Rate: 2.5 GPM (gallons per minute)
• Maximum Pressure: 2,500 PSI (172 bar)
• Cleaning Units: 6,250 (GPM x PSI)
• Operating Speed: 3,400 RPM
• Power Required: 4.5 EBHP minimum
• Pump Type: RSV Series triplex plunger pump — integrated unloader, fully rebuildable
• Manifold: Forged brass
• Plungers: Solid ceramic
• Connecting Rods: Bronze
• Valves: Stainless steel inlet and discharge
• Shaft/Flange: 3/4″ hollow keyway shaft — F25 SAE J609a — direct drive 5-7 HP gasoline engine
• Bore Diameter: 15mm / Stroke: 5.8mm
• Oil Capacity: 16 oz
• Max Temperature: 140 degrees F
• Weight: 11 lbs
• Easy Start: Not included on this model
• Integrated Unloader: Adjustable — set working pressure to match nozzle selection and application requirements
• Chemical Injector: Fixed 12% — integrated into pump body; detergent hose and filter sold separately
• Campbell Hausfeld Replacement: Yes — direct bolt-on replacement for compatible CH platforms using F25 3/4 inch shaft
• Serviceability: Fully rebuildable — all components nationally available through AR North America
• Warranty: 5-year limited warranty — US-based coverage through Annovi Reverberi North America

Typical Applications

Where the RSV25G25D-F25CH Delivers Best Results

• Campbell Hausfeld pressure washer replacement — the RSV25G25D-F25CH is the AR North America-specified direct replacement for compatible CH platforms. Bolt-on F25 3/4″ shaft compatibility with genuine RSV triplex quality and 5-year US warranty backing.
• Contractor pressure washing — surface prep, equipment washdown, and property maintenance — 2.5 GPM / 2,500 PSI RSV triplex output with integrated unloader for professional cleaning programs
• OEM equipment builds and replacements — the RSV25G25D-F25CH integrated pump-and-unloader format simplifies OEM design and field replacement with AR North America nationally stocked parts
• Fleet wash systems and facility cleaning — 6,250 cleaning units with integrated pressure regulation for consistent output across daily fleet washing and facility maintenance programs
• Complete the chemical delivery system — the RSV25G25D-F25CH 12% injector is ready. Add the DETHOSE-FIL6X 6ft detergent hose with filter to complete downstream chemical delivery.

5-Year US Warranty, National Parts Availability, and Wholesale Pricing

RSV25G25D-F25CH — RSV Triplex Platform. Integrated Unloader. Backed for Five Years.

The RSV25G25D-F25CH is protected by Annovi Reverberi’s 5-year limited warranty through the US-based warranty and service network administered by AR North America. Every internal wear component — forged brass manifold seals, solid ceramic plungers, bronze connecting rod assemblies, stainless valve seats, integrated unloader service parts, and packing kits — is stocked nationally through authorized AR North America distribution channels. Contractors, OEM builders, fleet operators, agricultural operations, resellers, and volume buyers are invited to contact the WSHPWR wholesale team for pricing on the RSV25G25D-F25CH and the complete WSHPWR pump package lineup.

6,250 Cleaning Units. 2,500 PSI. 2.5 GPM. Forged Brass. Bronze Rods. Integrated Unloader. Fixed 12% Injector. F25 3/4″ Shaft. 5-Year US Warranty.

Annovi Reverberi RSV Series. Triplex Plunger. Integrated Unloader. Fully Rebuildable. Nationwide Service.

The RSV25G25D-F25CH is the complete RSV Series integrated triplex plunger solution for gas engine-powered pressure washing at 2,500 PSI. Forged brass manifold. Bronze connecting rods. Ceramic plungers. Integrated adjustable unloader. Fixed 12% chemical injector. Five-year US warranty. Nationwide AR North America service centers. Fully rebuildable. Complete the chemical delivery system with the DETHOSE-FIL6X detergent hose and filter.

Volume buyers can reach the WSHPWR wholesale team at wholesale@wshpwr.com.