XWP50.15N | 13.2 GPM 2200 PSI Pump Oil Manual Vented Dipstick

Annovi Reverberi XWP50.15N Commercial Triplex Pump | 13.2 GPM 2200 PSI 24mm Shaft

The XWP50.15N from Annovi Reverberi is a high-flow commercial
triplex plunger pump delivering 13.2 GPM at 2,200 PSI at a
controlled 1,450 RPM — engineered for large-scale industrial
cleaning systems, multi-gun wash stations, agricultural rinse facilities, dairy
sanitation, commercial fleet washing, and continuous-duty industrial washdown
where maximum water volume, sustained mid-pressure output, and long service life
are all required. The XWP50.15N is built on a 24 mm solid
shaft compatible with belt-drive, gear-drive, and electric motor flange
configurations for flexible integration across stationary and mobile commercial
system platforms — combining a forged brass manifold, bronze connecting rods,
high-strength ceramic plungers, stainless steel valves, and oversized bearings into
a continuous-duty commercial pump backed by a 5-year commercial warranty
with U.S.-based service support.

At 1,450 RPM, the XWP50.15N operates at the low-speed design point that defines
commercial-grade pump longevity — reduced operating speed directly lowers heat
generation at the ceramic plunger and packing interface, minimizes bearing surface
velocity under sustained load, and slows the fatigue cycling rate on valve seats
across the long daily duty cycles that agricultural, fleet, and industrial cleaning
systems demand. Every XWP50.15N is factory-tested for pressure
and flow before shipment, arrives pre-filled with
break-in oil, and includes an oil sight glass and vented dipstick for complete
daily crankcase monitoring without tools or disassembly.

XWP50.15N Key Specifications

Flow Rate, Pressure & Drive Configuration

• Model: Annovi Reverberi XWP50.15N
• Flow Rate: 13.2 GPM — high-volume output for
  multi-gun wash systems, large agricultural rinse stations,
  fleet washing, and continuous-duty
  industrial washdown
• Pressure Rating: 2,200 PSI — surface-safe
  mid-pressure output for commercial sanitation, equipment
  washdown, and industrial cleaning without over-aggression
  on coated surfaces and sensitive equipment
• Operating Speed: 1,450 RPM — low-speed design
  for reduced heat, lower component wear, and extended
  continuous-duty service life
• Shaft Size: 24 mm solid shaft — compatible
  with belt-drive, gear-drive, and electric motor flange
  configurations for maximum installation flexibility
• Pump Type: Triplex plunger — three-cylinder
  balanced design for smooth, consistent low-pulsation output
  at rated 2,200 PSI
• Manifold: Forged brass — corrosion-resistant
  construction for long service life across commercial and
  industrial cleaning chemistries at
  2,200 PSI continuous duty
• Connecting Rods: Bronze — superior fatigue
  strength and corrosion resistance for extended service life
  in continuous commercial
  duty cycles
• Plungers: High-strength ceramic — thermal and
  wear resistant for extended seal life in long continuous-duty
  commercial operation
• Valves: Stainless steel — durability and
  consistent sealing performance in harsh commercial
  and agricultural environments
• Bearings: Oversized — support long continuous-duty
  operation under sustained 13.2 GPM
  commercial loads
• Oil Management: Oil sight glass and vented
  dipstick for complete daily crankcase level checks and
  pressure control
• Warranty: 5-year commercial warranty with
  U.S.-based nationwide service support

What’s Included with the XWP50.15N

Factory-Ready for Immediate Commercial Installation

• Pre-filled break-in oil — factory-installed
  for immediate commissioning without sourcing initial
  oil fill separately
• Oil sight glass — quick visual crankcase oil
  level inspection before each operating shift without
  tools or disassembly
• Vented dipstick — crankcase pressure balance
  and secondary oil level verification for complete
  daily maintenance checks
• Factory performance test results — confirms
  13.2 GPM flow and 2,200 PSI pressure output to published
  specifications before every XWP50.15N shipment
• User manual and schematic — installation
  reference, operational guidance, maintenance procedures,
  and parts identification for the life of the pump
• 5-year commercial warranty documentation —
  with U.S.-based nationwide service center coverage

How the XWP50.15N Delivers 13.2 GPM at 2,200 PSI

Triplex Plunger Design at 1,450 RPM for Continuous-Duty High-Flow Performance

The XWP50.15N uses a triplex plunger system where three
high-strength ceramic plungers operate in a synchronized reciprocating sequence
driven through bronze connecting rods — each cylinder drawing
water through stainless steel inlet valves and discharging at rated 2,200 PSI
through stainless discharge valves in a balanced, overlapping three-cylinder cycle.
This configuration produces smooth, consistent flow with substantially reduced
pulsation compared to axial or wobble-plate pump designs — delivering the steady
output that protects downstream hose assemblies, surface cleaners, spray guns,
and multi-gun manifold systems from hydraulic fatigue across long commercial
operating shifts.

At 1,450 RPM, the XWP50.15N’s ceramic plungers, valve seats,
bronze connecting rods, and oversized bearings all operate at a controlled rate
that maintains stable internal temperatures and keeps mechanical stress below the
fatigue threshold that higher-speed pump designs accumulate at equivalent output
levels. For agricultural operations, dairy facilities, fleet wash stations, and
industrial cleaning crews running the XWP50.15N across long
daily shifts, this translates directly into longer intervals between seal
replacements, more predictable valve wear curves, and sustained 2,200 PSI output
stability that high-speed pump designs cannot maintain across comparable
continuous-duty operating hours.

The bronze connecting rods provide the fatigue strength and
corrosion resistance appropriate for continuous commercial operation at 1,450 RPM
in the oil-bath crankcase environment — superior to aluminum rod alternatives
across the high-cycle loading and temperature variation conditions that commercial
and agricultural pump installations encounter across seasonal
operating schedules.

The 24 mm solid shaft supports the widest range of drive system
configurations available in the commercial pump class — belt-drive sheaves,
gear-drive couplings, and electric motor flange adapters all engage the same
24 mm interface, making the XWP50.15N adaptable to existing commercial system
platforms across diverse installation types without custom
adapter hardware.

XWP50.15N Key Benefits

Why High-Flow Commercial Operations Choose the XWP50.15N

• 13.2 GPM for multi-gun and large-area coverage:
  the high flow volume that enables simultaneous multi-operator
  configurations on trailer rigs and fast large-area coverage
  across agricultural, fleet, and industrial cleaning
  applications — more area cleared per shift than
  lower-flow 2,200 PSI alternatives
• 2,200 PSI surface-safe mid-pressure: effective
  mechanical cleaning action on concrete, steel, and equipment
  without over-aggression on coated floors, painted housings,
  and sensitive production surfaces — the right pressure
  for the widest range of commercial
  sanitation applications
• Bronze connecting rods for sustained commercial
  cycles: superior fatigue strength and corrosion
  resistance versus aluminum alternatives across the
  high-cycle loading conditions of continuous agricultural
  and industrial operation at 1,450 RPM
• 1,450 RPM low-speed continuous-duty design:
  engineered to run continuously across long commercial shifts —
  every hour at 1,450 RPM instead of 3,400 RPM means less
  heat, less seal cycling, less valve fatigue, and reduced
  bearing load — advantages that compound across
  a full operating season
• 24 mm shaft for three drive configurations:
  belt-drive, gear-drive, and electric motor flange
  compatibility from a single shaft specification — the
  broadest drive flexibility available in the
  13.2 GPM commercial pump class
• Forged brass manifold for commercial durability:
  superior pressure resistance and structural integrity versus
  cast brass alternatives — the manifold specification
  appropriate for 2,200 PSI continuous commercial
  and agricultural service
• Oversized bearings for 13.2 GPM continuous loads:
  sized for the actual radial and axial loads generated at
  13.2 GPM sustained output — not adapted from a
  lower-flow platform with
  undersized bearing capacity
• Factory-tested performance certification:
  every XWP50.15N ships with test results confirming rated
  13.2 GPM and 2,200 PSI — no performance uncertainty
  for commercial system builders and
  replacement pump installers
• 5-year commercial warranty — industry-leading
  coverage: most competing commercial triplex pumps
  in the 13.2 GPM class carry 1–2 year warranties —
  the XWP50.15N’s 5-year coverage reflects Annovi
  Reverberi’s confidence in the platform’s
  continuous-duty durability

XWP50.15N Typical Applications

Where 13.2 GPM at 2,200 PSI Delivers Commercial Results

• Agricultural rinse stations: barns, dairies,
  and equipment washdowns where 13.2 GPM at 2,200 PSI covers
  large agricultural surfaces efficiently and the XWP50.15N’s
  low-speed design sustains performance across extended
  daily seasonal cycles
• Dairy facilities: parlor washdown, processing
  room sanitation, and equipment cleaning where consistent
  2,200 PSI mid-pressure output at high volume provides
  thorough coverage without surface damage to dairy
  equipment and stall hardware
• Commercial fleet washing: buses, trucks, and
  municipal fleet wash stations where 13.2 GPM supports
  multi-vehicle washing throughput and 2,200 PSI removes
  road film and grime without damaging fleet
  vehicle paint and coatings
• Industrial cleaning and large wash bays:
  factory floor maintenance, large wash bay operations, and
  industrial equipment washdown where the XWP50.15N’s
  13.2 GPM volume maximizes area cleared per shift
• Waste management and municipal maintenance:
  tough environments requiring frequent high-volume cleaning
  where the XWP50.15N’s oversized bearings, bronze rods,
  and 1,450 RPM design provide the continuous-duty
  reliability municipal operations require
• Multi-gun contractor cleaning rigs:
  trailer-mounted and stationary wash systems handling
  multiple simultaneous operators where 13.2 GPM with
  properly balanced manifold design supports dual-operator
  configurations without performance degradation
• Food service and sanitation environments:
  floor and equipment rinse in commercial food service
  and processing environments where 2,200 PSI surface-safe
  pressure at 13.2 GPM provides thorough sanitation coverage —
  OEM system builders should follow facility certification
  requirements for their completed
  machine configurations
• Replacement pump for existing high-flow systems:
  the XWP50.15N’s 24 mm shaft and three-way drive compatibility
  make it a practical direct replacement for worn high-flow
  commercial pumps across belt-drive, gear-drive, and
  electric motor flange system configurations

XWP50.15N Installation & Maintenance

Best Practices for Long Service Life at 13.2 GPM and 2,200 PSI

• Select the correct drive interface for your system:
  the XWP50.15N’s 24 mm solid shaft accommodates belt-drive
  sheaves, gear-drive couplings, and electric motor flange
  adapters — confirm drive type and RPM reduction ratio
  before installation to deliver rated
  1,450 RPM at the pump shaft
• Mount on a rigid, vibration-resistant base:
  adequate structural support minimizes transmitted vibration
  into the forged brass manifold and crankcase — critical
  for trailer and skid-mounted commercial
  system installations
• Size inlet plumbing for 13.2 GPM demand:
  inadequate inlet line sizing creates cavitation at this
  flow rate — install an upstream strainer and ensure
  supply line diameter provides adequate NPSH for the
  XWP50.15N’s full 13.2 GPM flow requirement
• For multi-gun configurations: use a balanced
  manifold with matched hose lengths and correctly sized
  nozzle orifices — even pressure distribution across
  all outlets at full 13.2 GPM flow is essential for
  multi-operator performance
• Check oil before every shift: use the sight
  glass for visual confirmation and dipstick for secondary
  verification — adequate crankcase oil is the foundation
  of bronze connecting rod and bearing longevity in
  13.2 GPM continuous-duty operation
• Never run dry: always confirm water supply
  is flowing before starting — dry operation damages ceramic
  plunger packings and is not covered under
  the 5-year warranty
• Flush after detergents and sanitizers: run
  clean water through the XWP50.15N after every chemical
  application to protect forged brass manifold passages
  and stainless valve seats from
  chemical residue buildup
• First oil change at approximately 50 hours:
  then follow Annovi Reverberi’s duty-cycle-based maintenance
  schedule — heavy continuous-duty agricultural and
  fleet applications benefit from more frequent oil
  service than intermittent use
• Replace seals at first sign of weeping:
  address seal weep immediately — water ingress into the
  crankcase contaminates oil and accelerates bearing wear
  in high-flow commercial pump applications
• Winterize before cold storage: drain
  completely or use pump-safe antifreeze — freeze damage
  to the forged brass manifold or plunger bores voids
  warranty coverage

Why Choose the Annovi Reverberi XWP50.15N

High-Flow Commercial Performance Backed by 5-Year Warranty and AR Engineering

• 13.2 GPM at 2,200 PSI — maximum flow at
  surface-safe pressure: the high-volume, mid-pressure
  combination that covers the full range of agricultural
  sanitation, fleet washing, dairy operations, and large
  industrial washdown applications efficiently without
  specialized surface handling requirements
• Three-way drive compatibility from one shaft:
  belt-drive, gear-drive, and electric motor flange from
  the same 24 mm shaft — the most flexible installation
  specification available in the 13.2 GPM
  commercial pump class
• Proven replacement pump for existing high-flow
  systems: the XWP50.15N’s 24 mm shaft compatibility
  and three-way drive support make it the natural renewal
  and refresh choice for worn commercial pump platforms
  across diverse existing system configurations
• Bronze rods and low-speed design compound over
  a season: every operating hour at 1,450 RPM with
  bronze connecting rods adds to the service life advantage
  over high-speed aluminum rod alternatives — the
  difference becomes most apparent across
  full agricultural and commercial seasons
• Built for continuous duty — not rated for it:
  the XWP50.15N’s 1,450 RPM low-speed design, oversized
  bearings, and bronze connecting rods are engineered for
  continuous commercial operation from the ground up —
  not a higher-speed platform de-rated
  to commercial use
• Annovi Reverberi quality since 1958: over
  60 years of commercial and industrial pump engineering
  trusted by OEMs, contractors, and industrial operators
  globally — every XWP50.15N factory-tested to verified
  specifications before shipment
• 5-year warranty on a high-flow commercial platform:
  exceptional coverage in the 13.2 GPM class — backed by
  U.S.-based nationwide service centers and the global
  Annovi Reverberi parts network
• Backed by WSHPWR: expert application support,
  drive system sizing guidance, multi-gun manifold
  configuration assistance, and full parts availability
  for the XWP50.15N and the complete Annovi
  Reverberi XWP pump family

The Annovi Reverberi XWP50.15N delivers 13.2 GPM at
2,200 PSI at a controlled 1,450 RPM through a
24 mm solid shaft compatible with belt-drive, gear-drive, and
electric motor flange configurations — a high-flow commercial triplex pump built
with forged brass, bronze connecting rods, ceramic plungers, stainless steel
valves, and oversized bearings for agricultural sanitation, dairy operations,
fleet washing, industrial washdown, and multi-gun contractor systems where maximum
13.2 GPM volume, surface-safe 2,200 PSI output, continuous-duty reliability, and
5-year commercial warranty coverage are all required. Contact WSHPWR for current
pricing, availability, drive system compatibility, and application support.