XWLASS12G22N | 12 GPM 2200 PSI Pump 1750 RPM SS Head 24mm Shaft

XWLASS12G22N Commercial-Duty Plunger Pump

Performance & Duty Rating

• High-capacity triplex plunger pump built for continuous-duty wash systems and high-volume cleaning.
• Delivers 12 GPM at 2,200 PSI for fast coverage, strong rinsing, and steady cleaning power.
• Runs at a low, smooth 1,450 RPM to reduce heat, vibration, and wear over long runtime cycles.
• 24mm solid shaft supports belt-drive packages or direct-coupled industrial drive setups.

Key Specifications

• Model: XWLASS12G22N
• Flow Rate: 12 GPM
• Pressure Rating: 2,200 PSI
• Operating Speed: 1,450 RPM
• Shaft Type: 24mm solid shaft
• Manifold / Head: Forged brass for strength and corrosion resistance
• Plungers: Ceramic for abrasion and heat resistance
• Seals: Premium heat- and chemical-resistant sealing system
• Bearings: Oversized bearings for continuous-duty stability
• Maintenance Features: Oil sight glass & vented dipstick
• Warranty: 5-year commercial-use warranty

Included with the Pump XWLASS12G22N

• Factory-installed break-in oil for proper start-up lubrication
• Oil sight glass for fast daily oil-level checks
• Vented dipstick for crankcase pressure balance
• Factory performance testing verification
• User manual and schematic documentation
• 5-year commercial warranty with U.S.-based support

How the XWLASS12G22N Delivers High-Flow Output

The XWLASS12G22N uses a triplex plunger design to generate smooth, consistent flow with minimal
pulsation. Three ceramic plungers reciprocate in sequence, drawing water through inlet valves and discharging it
through high-pressure valves to maintain steady output at 12 GPM and 2,200 PSI.
The forged brass manifold resists corrosion and pressure fatigue, while the seal system is engineered to handle heat,
detergents, and challenging water conditions.

Operating at 1,450 RPM, this pump runs cooler and quieter than high-speed alternatives. That lower
operating speed reduces stress on bearings, seals, and the crankcase—helping extend service life in multi-shift
wash bays and continuous-duty applications.

Benefits

• High-flow productivity: 12 GPM supports wide-area rinsing and faster wash times.
• Balanced pressure: 2,200 PSI provides effective cleaning without excessive system strain.
• Continuous-duty construction: Oversized bearings and rugged internals built for long runtime cycles.
• Durable wet-end: Forged brass manifold and ceramic plungers resist wear, corrosion, and heat.
• Low-RPM advantage: Reduced vibration and heat buildup for longer component life.
• Service-friendly: Sight glass and vented dipstick simplify routine maintenance checks.
• Long-term coverage: 5-year commercial warranty with nationwide support.

Typical Applications for XWLASS12G22N

• Municipal wash bays: Buses, sanitation trucks, utility fleets, and public works equipment
• Fleet maintenance: Delivery vehicles, heavy trucks, and rental fleets
• Industrial washdown: Facilities, warehouses, docks, and equipment service areas
• Concrete and flatwork cleaning: Sidewalks, pads, parking lots, and large surface prep
• Waste management: High-frequency wash cycles and chemical-heavy cleanup
• Agriculture: Barn sanitation, dairy washdown, pens, and equipment rinse-down
• Entertainment & venues: Theme parks and large facility maintenance crews

Installation & Maintenance Notes

• Use a rigid, vibration-resistant base and maintain proper alignment for belt-drive configurations.
• Feed clean, filtered water to protect valves, plungers, and seals from debris wear.
• Check oil level through the sight glass before each operating shift.
• Flush with clean water after running detergents or chemicals to reduce residue buildup.
• Follow recommended oil-change and seal/valve service intervals based on duty cycle.

Summary

The Annovi Reverberi XWLASS12G22N is a commercial-duty triplex plunger pump delivering 12 GPM at 2,200 PSI
at 1,450 RPM. Built with a forged brass manifold, ceramic plungers, a 24mm solid shaft,
and maintenance-friendly features like an oil sight glass and vented dipstick, it is ideal for municipal fleets,
industrial wash bays, agriculture, and high-volume cleaning systems. Factory noted with break-in oil and backed by a
5-year commercial warranty, it provides reliable continuous-duty performance and long service life.